My ipod is completely frozen without me locking it please help!
I tried to plug my ipod into itunes for new music and all of a sudden its completely frozen it wont turn off, none of the controls work and my computer stopped reading it. Is there anyway to reset it or at least unfreeze it?
next time this happens, simply hold the menu and select buttons for six seconds until the apple logo appears. This is how you restart it
Similar Messages
-
my iPod screen won't automatically turn off without manually locking... help!
Does anyone know how to change the settings so it will turn off/dim/lock automatically without needing to press the white button at the top all day? I'm draining batter and it's so annoying!Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
when I go to find my desktop in Finder it shows a folder and a silver lock ? PLEASE HELP ME !
If the light will not turn on the TC is dead. No matter that the hard disk is running.. it should only run at start up or when it is accessed not constantly.. that means the board in the TC has failed. Apple do not repair them.. They will replace it under warranty or applecare.
If you have gone over the 12month warranty it will still be covered if you have applecare on any computer or an Apple TV. In fact the cost of the apple TV plus apple care is still cheaper than buying a new TC.. so it is a route some people are taking.. certainly depends.. in some places like Europe or Australia now, there is a recognition that statutory warranty must be longer on a product that is premium to the market. 12months is not good enough. Apple will sometimes listen.
They might be fixable but I do not know how. -
After upgrading to Mavericks my Mac Pro does not open my double CD drives when I hit eject in the menu bar it locks up (please Help)?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful. -
I lost my iPod and it's offline. Can someone PLEASE help me?
I lost my iPod and it's offline. Can someone PLEASE help me?
No.
lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown/or off-line, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
Trying to sync ipod with itunes library, but I keep getting this message, " The ipod is synced with another itunes library. Do you want to erase this ipod and sync with this i tunes library?"
I do not want to erase my ipod!!! Any suggestions?? please help!Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Using The iPad Camera Connection Kit
http://support.apple.com/kb/HT4101
Cheers, Tom -
Ipod will not show up, in iTunes library please help.
Ipod will not show up, in iTunes library please help.
I just updated to the newest version of ITunes well, not just but a few days ago. Anyway I have windows 8, and in ITunes my Ipod 5th gen will not show up. I have tried somethings such as unpluging repluging, going to services and restarting, basiclly everything on yoyutube, none still work. It's ***** to cause I just wanted to put music on my Ipod, if anyone has an idea of what to do please give some suggestions.
Thank you, for trying to help.Hello Stephen19wfwake,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
1. Try the iPod troubleshooting assistant:
If you haven't already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below.
2. Restart the iPod Service
3. Restart the Apple Mobile Device Service
4. Empty your Temp directory and restart
5. Verify that the Apple Mobile Device USB Driver is installed
6. Change your iPod's drive letter
7. Remove and reinstall iTunes
8. Disable conflicting System Services and Startup Items
9. Update, Reconfigure, Disable, or Remove Security Software
10. Deleting damaged or incorrect registry keys
Best of luck,
Mario -
I have a problem after I lock my iphone or it is automatically locked , the time doesn't update. It just freezes at the last time of locking. Please help , it is iphone 5 running iOS7.1
I check with my service provider as well as I synchronized with iTunes , changed time manually with the right time zone. Unfortunately the problem keeps showingHi Courcoul
Thanks for stepping by
To tell the truth I forgot to mention that I already did what you said, even more I tried all "reset" options including:
Reset all settings
Erase All content and settings
Reset Network settings
Etc
Even
Reset location and Privacy
It keeps showing the problem -
I have updated my phone to 4.3.3 and I was told there would be more bells and whistles. I haven't found more texting sounds. Have I updated my phone wrong or just not completed it all the way? Please help me. Still trying to figure this iphone 3G out.
You have the iPhone 3GS, not the 3G. The last update to support the iPhone 3G is 4.2.1.
iOS 4.3.3 includes bug fixes etc. There is nothing really special about this update that wasn't introduced in iOS 4.3. iOS 5 is the one to wait for - it will be released in the Autumn/Fall and includes over '200' new features/improvements.
The additional text tines and ringtones were an iPhone 4-only feature. -
hi can someone keep this simple for me! my iPhone is due for a renewal. but my old laptop that it is backed up to no longer works! how do i go about saving all my songs pics etc to a new laptop without losing anything? please help!!!
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
-
My MacBook get's hot really quick and then discharge's quickly without opening any program, please help.
I have checked the cooling fan, and it's working, and I took it to an IT technician and he said my hardware is allright, so is it a problem from the OS it self??
OS X(10.8.5)Restart with the Option key held down and the Mac OS X install disk inserted, provide the firmware password, click on the DVD, press the button with the straight arrow, access the firmware settings, disable the password, and use FireWire Target Disk mode. If you can't do that or it doesn't work, contact Apple.
(38384) -
Pass username and password ADFS without using query string, Please help.
pass username and password ADFS without using query string, Please help.
I used query string , but it is unsecured to pass credentials over url, with simple tool like httpwatch , anyone can easily get the password and decrypt it.Hi,
According to your post, my understanding is that you had an issue about the ADFS.
As this issue is related to ADFS, I recommend you post your issue to the forum for ADFS.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=Geneva
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thank you for your understanding and support.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
last night i have used my ipod and in morning i found it dead please help me its not responding at all i have tried evry thing
Charge the battery.
If necessary, restore the iPod > iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software -
i connect my iphone 4g on charging after some time it is complete dead and very heat up please help me.
helllllllllllllllllpppppppeeeeeeeee meThere is no such thing as an iPhone 4G.
-
I was hacked i kept getting emails that some purshcaes were being made when no one was downloading them and i guess they hacked my apple iD because they changed the security question and now i cant change anything without the security question please help i want to reset the security question but i cant.
You should contact Apple by phone as soon as possible. You'll need to change your Apple ID and all passwords.
See Contact Apple at the bottom right of this page.
Hope this helps.
Maybe you are looking for
-
Hi friends, The message processing(pipeline steps) happens in the abap stack,then how request message mapping(one of the pipeline step)happens in abap stack,as message mapping should execute in java stack, Thanks, Suresh.
-
hi guys, I have implemented xml publisher 5.6.2, Generating xml file, creating the rtf template using xml publisher desktop and then run the XMl Publisher concurrent program to generate the output. Now my requirement is i have a Invoice report for mu
-
What are the best settings to use in the export manager when exporting from Aperture 3.5 to Photoshop cc for editing? Should I use tiff or psd? 8bit or 16bit? How many dpi?
-
Method signature of a two dimensional array of an object
Hi, Does anyone know how to set the method signature of a two dimensional array of an object (e.g. : String[][]). Thank you.
-
Need To hide Tabs in RiskAssessment creation
Hi All , in EHSM while creating RISK ASSESSMENT the tabs RISKS AND TASKS should be invisible,But while maintaining or editing the created RISK ASESSMENTS the tabs should be visible. the component configuration is EHHSS_RAS_OIF the webdynpro component