My ipod is formatted to windows, I now have a mac...

Hi,
my ipod is formatted to Windows, but I now have a mac. Is there a way to change it, and what difference does it make?
Any help would be appreciated x

You can do it by restoring the iPod in iTunes. If you need some help getting the music over to the mac, here is an article that might help.
http://support.apple.com/kb/HT1329
If you have all your music on an external hard drive, the process will be a breeze.
i

Similar Messages

  • My ipod was formatted for Windows but now I'm buying the Mac G5

    Am I going to be able to re-format my windows ipod to mac?
    It would be terrible if I bought this new Apple computer and couldn't use my windows ipod.

    Hello Christine, welcome to discussions.
    You have two options.
    Your Mac will be able to use a Windows formatted iPod, so one option is to simply do nothing. It'll work fine the way it is now.
    The other option, which I recommend, is to use the iPod Updater on the Mac, and re-format the iPod for the Mac.
    This should give you a bit better performace for data transfers, and you'll also be able to update the firmware on the iPod if/when a new firmware is released.

  • IPOD spontaneously formatted to Windows and now I can't retore it with Mac

    My IPOD somehow is now formated for Windows. My Itunes doesn't recognize my IPOD and won't let me restore it in the summary tab (IPOD not supported etc...). My Ipod still has data on it (Capacity/Available as shown on the IPOD in the "about" menu in settings) but I can't access any music.
    I don't have internet on my Mac so I downloaded the restore and lastest Itunes programs from a different computer and put them on my Mac but to no avail.
    How do I convert my IPOD's format back to Mac?
    Why did it come out of the closet like this?

    I had previously tried to format the disk with the utility but couldn't get it to work (my own ignorance I'm sure).
    But using the utility I erased the disk and re-created the single partition. Of course, I was back to the same issue of having Itunes not allowing me to restore the Ipod unless it connects to the internet to check for updates first. The Ipod restore utility stated that the Ipod type is not supported and showed that the Ipod format is still windows.
    My plan now is to go to the Apple store where hopefully a sales associate will kindly let me restore my Ipod on a store computer with internet.
    It would sure be nice to know why the Ipod just reverted to a windows format.
    Thank you for your help thus far.

  • CS6 for Windows but now have a Mac

    I have CS6 for windows but recently purchased a Mac. Can I use my CS6 on my new machine or do I have to purchase it again?

    Change product platform or language
    You can swap languages/platforms for a latest version product if you follow the instructions at the following link:
    http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l

  • Changing iPod Settings so it recognizes I now have a Mac ...

    Does anyone know how to change these settings? My iPod believes that I have some kind of Windows OS, which I used to, but now I have an iBook G4. I think this would be nice in terms of updating / charging iPod at the same time.
    Any help most welcome.
    I have a 3rd generation iPod.
    S.
    iBook G4   Mac OS X (10.4.3)  

    To reformat the iPod, just restore it to factory settings. Be aware that this erases the contents of the iPod.

  • I have CS4 (Windows) and now have a Mac computer, is there any way I can download to the Mac?

    Does anyone know if there is a way to download my Windows CS4 to my recently purchased IMac.

    No. you are long past any upgrade and platform swap eligibility. You can only buy a new license or sign up for CC. It's a moot point, anyway. There are serious compatibility issues with CS4 on OSX 10.10, so it would be nothing but trouble.
    Mylenium

  • Bought CS5 for windows but now have a mac.

    I have bought cs5 a couple of years ago for Windows. But soon after i replaced my Windows for a mac. I put in a partition on so i could have both but i am getting fed up of it . So i am wondering if i could convert the cs5 to work on my mac please.

    You can contact Adobe. You may be eligible to buy Adobe CS6 for Mac at upgrade rates.

  • I have a ipod nano 4th gen set for windows. I have a mac now how do I set it for mac

    I have an iPod nano 4th gen Its set for windows  I now have a Mac  How do I set it for Mac? I reset it so its empty. I'm starting a new music library on my mac.

    On a Mac, click here and follow the instructions.
    (117387)

  • Please help me.ı delete mac os on my harddisk and ı format it ntfs.now ı have a mac os x install dvd but not working.ı think it is not working because of my hard disk format is ntfs.what can ı do?????

    ı delete mac os x lion on my hard disk and ı format it ntfs.ı install windows xp.now ı have a mac os x snow leopard install dvd but it isn't working. ı think it's not working because of my harddisk format is ntfs.what can ı do for install mac os x ?thanks

    The HD must be partitioned with GUID partition map and Mac OS extended (journalled) file system. Do not partition the drive into two. When you have a working OS X system, use Boot Camp to create the Windows partition and install Windows.
    If you're trying to install Snow Leopard on a Mac that was delivered with Lion installed =
    1. It may not be possible at all depending on the Mac.
    2. If it is possible, it cannot be done with the retail SL disc which is 10.6.3
    3. The only way it can be done is to obtain the original grey discs which would have come with the Mac if it hadn't had Lion installed in the supply chain. They will be at least 10.6.6 and more likely 10.6.7 or .8. You can try to obtain those from Apple Customer Services.
    Macs which can run OS X 10.6 (courtesy of a. brody)

  • My iPod Classic was stolen and returned to me by police but now it "cannot be synced because it cannot be written to or read from". I noticed the thief had changed the format to "windows" but I have restored it and still get the same message.

    My iPod Classic was stolen and returned to me by police but now it "cannot be synced because it cannot be written to or read from". I noticed the thief had changed the format to "windows" but I have restored it and still get the same message.

    If the media is in the library then yes it is that simple. Connect the device, load it up with your media. The problem is when you try to connect a full device to a new empty library on a new computer when iTunes will offer to replace the content on the device with that in the local library, i.e. nothing! (For anyone in that position see Recover your iTunes library from your iPod or iOS device).
    You should be able to add your devices at https://supportprofile.apple.com/ though I'm not sure what happens if the second hand iPod was previously registered.
    tt2

  • My ipod is formated for windows xp. new laptop is windows 8. ipod wont update on new laptop, what do i do now?

    my new laptop is windows 8. iPod is formatted for windows xp. new laptop knows iPod is there but wont update. how do I fix this?

    hey there oddball35,
    It sounds like you are trying to update your iPod with your new computer. Without knowing the specific symptoms, I recommend you start with choosing the iPod model you have from the following website:
    iPod Troubleshooting Assistants
    https://www.apple.com/support/ipod/five_rs/
    If that does not resolve the issue, are you getting any error messages, or what specifically is preventing the restore from happening?
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • IPod is formatted for windows but i need it formatted for mac

    i just got my iPod a couple days ago used from best buy and hooked it up from my mac not aware that it was formatted for windows. when i try to restore my iPod it just freezes up my computer. do i really need it formatted for mac in order to get good performance?

    Right. If you restored it in Windows the iPod will still be formatted for Windows.
    Now see if you can restore it on your mac.
    Also, know that Windows-formatted iPods work fine in Mac OS X. The only "problem" is that you cannot update the iPod's software on your mac if another software version is released. You would have to do that through Windows.
    If you plan on using your iPod with both Operating Systems, you may want to keep it formatted for Windows.
    btabz

  • Problem: I have a New Mac and my iPod is formatted for Windows

    My old computer (PC with Windows) crashed and took all my music with it.
    I got a new computer, a Mac. I have looked at many different programs for moving music from the iPod to the computer and many are appealing (Podworks and iRip). However, they do not seem to be working because my computer is not recognizing my iPod. I set my iPod into disk mode by following the instructions on this website. However, that has not helped.
    The problem may be in the fact that my iPod is formatted for Windows and I am no longer using Windows. I cannot reformat my iPod for a Mac at this point because my iPod is the only location of my music. Reformatting it now would erase all my music and I have no backup!!
    When I am plugging my iPod into the computer, I am holding the Option+Command keys to make sure that the iPod does not automatically sync. Is this necessary? I ask this because my iPod has no connection with this computer's iTunes and I have doubts that it would automatically sync. It seems that by holding the Option+Command Keys I am preventing the computer from recognizing the iPod. A brief iPod icon appears on the desktop and then disappears.

    Have you failed to maintain a backup?

  • I have had CS3 on a windows desktop that has died and now have a mac can the licence be used to down load it in mac format or have I got to purchase it again.?

    I Have had CS3 on a windows desktop that has died and I now have a mac, will my licence allow me to download a mac version of
    CS3 or do I have to buy a new package and licence?

    Unfortunately your CS3 license is Windows only.
    There is a platform transfer process available from Adobe but that only applies to CS6.
    Order product | Platform, language swap
    Your options now are either to buy superseded CS6 for Mac or join the Cloud and get the latest versions, provided your hardware and operating system meets the system requirements.
    With the Cloud you can install on both Mac and/or Windows for no extra cost with no complicated platform swap processes. On both Mac and Windows you just sign in with your Adobe ID then download the Cloud apps.

  • Had PSE 8 installed on PC Windows 7 with a catalog backup on an external drive. Now have a Mac with OS Mavericks. If I install PSE 12 or Lightroom on this Mac can I use the cat. backup from Windows or must I start from scratch

    Had pse 8 on a Windows 7 PC with a catalog backup on an external drive. Now have a Mac with OS Mavericks. If install pse 12 or Lightroom on the Mac will I be able to use the old catalog backup or must I start from scratch.

    If you made a full catalog backup using the organizer's backup command, and you did it to a removable drive, yes, you can restore it to the mac. A backup made on discs will not work, though.

Maybe you are looking for

  • View Object to read data from a java file

    Hi, I am using JDeveloper 11.1.1.4 and ADF-BC in my application. For one of my view objects , I want the data to be read from a java file which exposes some method to return a collection. I cannot use a static view object in this case. Please suggest

  • Can you help with Tcode to fill this SETUP table? not working for me.

    Hi, For the datasource 2LIS_11_VASCL (SD Sales: Schedule Line Item), I need to fill the Setup Tables via OLI*BW I understand the * to be the application number, which in this case it is 11 but I get a message that OLI11BW does not exist. 1. Can you 

  • Need Help - Problem while having a panelformLayout inside a Region.

    I have a jspx page which has some regions out of which one region has a panel form layout in it's corresponding jsff. Below is my jspx <?xml version='1.0' encoding='UTF-8'?> <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1" xmlns:f="ht

  • No sound is coming from the speakers.

    I have a Mac Mini.   All of a sudden my speakers, which have been working for over a year quit. I and bought another set - same issue. I can hear the sound coming from the hard drive.  I've looked at the sound settings but I'm not quite that technica

  • ORDERS05 IDOC to flat file - mapping question

    I have a requirement to convert an ORDERS05 IDOC to a "flat" structure for one of our vendors. When the IDOC has the following data, the mapping works well Input ===== ORDERS05    - E1EDP01       POSEX        00010       - E1EDPT1           -E1EDPT2