My ipod is freezing during booting and my pc doesnt recognize it

Hi
I did a restore ipod from my ipod and after it completed it , my ipod cant boot. It freezes during booting and my computer doesnt recognize it when i plug it.
Is there anything I can do ?
Thanks.

http://support.apple.com/kb/ht1808

Similar Messages

  • Zen Micro Freezes during play and sometimes won't turn on at

    I have been having some issues with my micro and wondered if anyone could help. I didn't drop it or do anything I can recall to cause these issues, it just seemed to start out of the blue. 2 things are happening. Sometimes it will freeze during play and "buzz" (it's really just transmitting a countinuous sound of a millisecond of what it was playing like if the guy was saying apple, and it freezes when he starts to say it it will sound like "aaaaaaaaaaaaaaaaaaaaaaaa" but in a completely illegible buzz way). Second, it will sometimes not turn on at all, no creative logo, no lights, no nothing. Once I take out the battery and replace it, it will always then start no problem. The battery does not seem to be loose at all as the above mentioned buzzin will not stop until I remove the battery, and as I have repeatedly removed the back of the micro during these buzz session?the battery remains firmly seated and the buzzing continues until I remove it. So far I have updated the firmware to 2.2.02 (which I believe reformatted) which didn't stop it from freezing up during play, and just now did a disk clean up (which I can't imagine will have any change?if a complete format didn't). I haven't had the start up problem since the firmware update, but I haven't turned it on and off that many times yet. Any ideas? Sorry to be so verbose but I wanted to explain as best as I could what's wrong, and what I've done so far.

    Remove SIM and miniSD card first. Try to boot.
    The try hooking it up to the PC again. And see if you might be able to redo the update process.
    You can also try a hard reset. As described in a different tread. (Or read below).
    Othervise, I afraid you will have to take it to a Service Center.
    -- Quote from djassa1 (Re: N80 won't start up!)--
    Just reset to factory default.
    You will need your 2 hands to do that: While the phone is off press and hold the [Green call Button] + [3 digit button] + [* button] and power on and hold the powwer button. Do that until the phone asks you for the local city reference.
    -- End Quote --
    Best of luck!

  • Freeze during boot after enabling Hyper-V feature in Windows 8

    Good day.
    I'm using AMD FX 8320 with 990FXA-GD65. After enabling hyper-v my pc freezing during boot.  Google told me that it might be issue with USB 3.0 controller, so i disabled it in bios, but result still the same.
    Can you please tell me where should i look at?

    Hi,
    Please try to boot into WinRE and run the Startup Repair option.
    Generally speaking, when you add feature like Hyper-V, system would take a long time to get this feature configured. if your computer still stay updates configuration steps, you can use Windows 8.1 installation image to repair system. In system repair mode,
    you can access into Command Prompt mode, and check CBS.log under C:\Windows\logs\CBS.
    This log file would record Windows installation process, we may find the problem of Hyper-V installation.
    Kate Li
    TechNet Community Support

  • HP Pavillion p6240f freezes during boot up - Not enough space in Runtime area!!

    Hello,
    My HP Pavillion p6240f desktop freezes during boot up.  After POSTing and listig the USB connections, it displays the following on the bottom of the screen:
    Not enough space in Runtime area!! SMBIOS data will not be available. Press F1 to resume.
    I went into setup, and this is the BIOS data:
    AMI BIOS revision 5.16  BIOS Date: 01/13/2010
    Core Version 08.00.15
    Can anyone help me?  I have found no solutions after heavily searching the internet, and it is important that this computer have unattended reboot after a power outage.
    Thanks.

    Hi,
    Try clearing the CMOS.
    If the above doesn't work then remove two of the four dimms (every odd dimm) and then again clear the CMOS. If this should work then power down and reinstalled the two dimms and again clear the CMOS and reboot.
    If the above doesn't work then you might have to visit the local PC repair shop.
    If you can get unattended boot after power outage to work then there is a bios setting that needs to be changed. Boot into the bios and look under the power drop down. The after AC power failure needs to be set to AUTO (restart). Be sure to save the settings.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Installer freezes during boot with ATI Radeon card

    System: Toshiba Satellite A305-S6916
    Video card: ATI Radeon Mobility HD 3650
    Installer: 2010.05 amd64 netinstall
    Problem: Installer freezes during boot at "setting console to utf-8 mode".
    Solution: Add "radeon.modeset=0" to kernel command line.
    Posting for the sake of anyone else who might be having this same problem.

    Same here:
    System: Dell Inspiron 1525
    Video card: Intel GMA X3100
    Installer: 2010.05 i686
    Problem: screen turn black during system load.
    Solution: Add "nomodeset" or "i915.modeset0" to kernel command line.

  • HT1926 I updated itunes and now it doesnt recognize my CD drive

    I updated Itunes and now it doesnt recognize my CD drive

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • Hello.  After i upgrade to moutain lion my WD my book studio stop working and my mac doesnt recognize it. I need help please

    Hello.  After i upgrade to moutain lion my WD my book studio stop working and my mac doesnt recognize it. I need help please

    yes, it appears in disk utilities. but i cant get any information of what is inside.  thank for your interest in my issue

  • IPod 5G Freezes during Video Playback

    iPod freezes during video playback. Does anybody else have this problem?
    Usually freezes up about 10 minutes into a video, and then complety locks up. This usually requires 2 to 3 restarts untill it comes back working properly.

    Mine does the same. It really only happens to me when I try to navigate thru menus when video is playing. I usually have to do a forced Reset. I truly think that introducing video on the iPod was not ready for primetime as it is very sluggish, buggy and sensitive during playbabck of video. No problems with music whatsoever but I am frustrated with the very finicky video qualities of this thing.

  • MDD DP G4 elusive diagnosis - freezes during boot up.  Tired- HELP!

    After not using my Dual Bootable  DP 1.25 GHz MDD G4 for a couple of months, it's now freezing during the boot process.
    What's weird is that it boots in Target Mode just fine, and when connected in this mode to my G5 Quad, it actually boots the G5 Quad in Target Mode just fine!    The G4 drive shows in fact as the boot drive on the G5 Quad's monitors.
    I was able to boot off a retail Tiger 10.4.6 disk, so I did an erase and install of a fresh Tiger OS 10.4.6, which I promptly updated to 10.4.11.  After trying and failing umpteen times to boot off the HD, even in safe mode, I ended up being utterly unable to get either of the Super Drives to open normally, so I had to resort to the straightened paper clip trick to retrieve the install DVD.
    Now even the paper clip fails to open either of the optical drives.
    I have twice wiped the HD from the G5 Quad after booting up in Target Mode, and installed fresh copies of Tiger 10.4.11 as described, with the Tiger install DVD in the SuperDrive of the G5 Quad.
    Since in Target Mode the G5 Quad boots just fine of the G4 HD, I think I can rule out the Hard Drive.
    I think I can rule out the battery too, as it boots fine in Target Mode and in the regular boot process it sometimes gets as far as playing the OS fresh install music after going through the registration process.
    I do have the original install disks with AHT 2.0.2 that came with the G4, but I can't get the optical drives open to insert the disk in either one of them.
    I'm thinking it could be bad RAM, but why would the optical drives be stuck, both of them??!
    I'd be most grateful for any tips as to what to try next.

    Jump all hard drives Cable Select and place the intended Master on the end connector of each IDE ribbon (each bus).
    Can you clarify, please?  Are you referencing the actual CPU?
    Yes. A very fine layer of corrosion on one or more of the 300 pins could render the machine incapable of achieving logic.
    The step should be performed after doing all the other reseats that I suggested.
    I've never re-seated one,
    Not so difficult.
    Replacement of the thermal compound is a requisite part of the proceedure, however.
    Use Arctic Cooling MX-4.
    No worries if a bit too much is applied, unlike silver based compounds....... bzzzZZTT! Dead CPU.
    My tutorial:
    9AE7FE0E-0CF2-4A7C-8003-489B282582BC.html
    I posted this for someone who wanted to remove a MDD logic board (edited for clarity, I hope):
    To remove the logic board (of a MDD):
    -Disconnect all cables connected to the logic board.
    -Remove any PCI cards, and RAM.
    -Find and remove the five screws that hold the heatsink. Remove the heatsink.
    -Remove the processor board by lifting the edges of the daughter card. After successfully pulling the card free from the connector, it might help to slide the processor board a bit to the rear and/while lifting out, being careful to clear the two mounting pegs.
    -Find and remove the one screw that holds the logic board.
    -Slide the logic board away from the back panel, lifting to avoid the chassis hooks.
    You need to pay attention to the three steps in bold. There is no screw retaining the CPU daughter card. It is sandwiched between the heatsink and the logic board socket.

  • MacBook 2010 (white) freezing during boot up with 4 Gb RAM

    I have a 13" MacBook 2009 (white) with 4 GB RAM installed by Apple. I upgraded from Leopard to Snow Leopard without a hitch. However, when I upgraded to LION, the computer initially started to freeze sporadically during regular usage then simply froze just before the login screen every time it was rebooted. I took it in to the Apple Store and th Genius staff kept it for 2 days. They tested the RAM. Turns out that the MacBook only recognizes 2 GB of RAM now. Doesn't matter which 2 GB stick I put in which slot, it freezes on boot up. The computer boots up fine with either 2 GB stick in either slot. I would obviously prefer to have the computer run with all 4 GB. I have tried all the steps identified in the article "Mac OS X: Gray screen appears during startup" http://support.apple.com/kb/ts2570 to no avail, including the last step, "Perform an Erase and Install installation of Mac OS X as a last resort." I have searched through the Communities and tried all the suggested fixes. Nada. I have also upgraded to 10.7.3 which came out last week and retried all the steps. Again, nothing. Has anyone had a similar problem and, more importantly, found a fix? FYI, the computer is no longer on Apple Care and so replacing the motherboard is not an option. Thanks!

    Hi Linc Davis, here are the results:
    MacBook-de-Renee:~ Renee$ kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    MacBook-de-Renee:~ Renee$ sudo launchctl list | sed 1d | awk '!/0x|com\.apple/{print $3}'
    org.x.privileged_startx
    org.postfix.master
    org.ntp.ntpd
    org.cups.cupsd
    com.vix.cron
    com.microsoft.office.licensing.helper
    MacBook-de-Renee:~ Renee$ launchctl list | sed 1d | awk '!/0x|com\.apple/{print $3}'
    org.x.startx
    org.openbsd.ssh-agent
    MacBook-de-Renee:~ Renee$ ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
    /Library/Components:
    /Library/Extensions:
    /Library/Frameworks:
    AEProfiling.framework
    AERegistration.framework
    AudioMixEngine.framework
    NyxAudioAnalysis.framework
    PluginManager.framework
    TSLicense.framework
    iLifeFaceRecognition.framework
    iLifeKit.framework
    iLifePageLayout.framework
    iLifeSQLAccess.framework
    iLifeSlideshow.framework
    /Library/Input Methods:
    /Library/Internet Plug-Ins:
    Flash Player.plugin
    Flip4Mac WMV Plugin.plugin
    JavaAppletPlugin.plugin
    OfficeLiveBrowserPlugin.plugin
    Quartz Composer.webplugin
    QuickTime Plugin.plugin
    SharePointBrowserPlugin.plugin
    SharePointWebKitPlugin.webplugin
    Silverlight.plugin
    flashplayer.xpt
    iPhotoPhotocast.plugin
    nsIQTScriptablePlugin.xpt
    /Library/Keyboard Layouts:
    /Library/LaunchAgents:
    /Library/LaunchDaemons:
    com.apple.remotepairtool.plist
    com.microsoft.office.licensing.helper.plist
    /Library/PreferencePanes:
    Flash Player.prefPane
    Flip4Mac WMV.prefPane
    /Library/PrivilegedHelperTools:
    com.microsoft.office.licensing.helper
    /Library/QuickLook:
    GBQLGenerator.qlgenerator
    iWork.qlgenerator
    /Library/QuickTime:
    AppleIntermediateCodec.component
    AppleMPEG2Codec.component
    Flip4Mac WMV Advanced.component
    Flip4Mac WMV Export.component
    Flip4Mac WMV Import.component
    /Library/ScriptingAdditions:
    /Library/Spotlight:
    GBSpotlightImporter.mdimporter
    LogicPro.mdimporter
    Microsoft Office.mdimporter
    iWork.mdimporter
    /Library/StartupItems:
    /etc/mach_init.d:
    /etc/mach_init_per_login_session.d:
    /etc/mach_init_per_user.d:
    Library/Address Book Plug-Ins:
    Library/Fonts:
    Library/Input Methods:
    .localized
    Library/Internet Plug-Ins:
    Library/Keyboard Layouts:
    Library/PreferencePanes:
    MacBook-de-Renee:~ Renee$ osascript -e 'tell application "System Events" to get name of every login item'
    iTunesHelper, Dropbox
    MacBook-de-Renee:~ Renee$

  • Windows freezing during boot,after vga drivers installation

    System freezes during the boot process,as soon as i install nvidia drivers.i ve tried eliminating the problem with several ways,but nothing seems to solve it.different windows version,different drivers version,different cpus,different memories,nothing attached on the board except the hdd and ram,different psu,manually installing drivers,stopping nvidia services,different vgas(9600gt,9800gt,gts240/250)although it works with pov 9300gs or 8600gt 512.additionally,system boots up normally in safe mode.is there anything you can possibly propose?
    thanks in advance.
    cpu:intel c2d e8500
    m/b:msi p43t-c51  ms7519 latest bios
    memory:2x kingston 2gb 6400
    psu:premier 450w
    vga:point of view 9800gt 512 green edition
    os:windows xp pro 32bit
    hdd:500gb hitachi
    pci:serial port oem card

    guys i have the exact same problem it has nothing to do with psu i have a coolermaster 800W and a msi9800gt vga this m/b has compatibility issues with nvidia graphics drivers and some nvidia vgas. I have two of them. Both have the same problem get an AMD graphic card. Trust me i know what i'm talking about. I tried every possible solution out there nothing worked. I emailed msi technical support they just send me latest bios and latest drivers nothing. I tried to update vga bios nothing. I tried tree different psu all from different vendors guess what nothing. I changed my memory modules nothing. I changed cpu nothing. I tried every bios available nothing.

  • My ipod touch freezes during the backup portion of sync...help

    Everytime I try to sync my ipod touch it freezes during the backup portion.  Not sure what to do

    Go to preferences, devices, and prevent it from syncing automatically.
    Disable any and all security/antivirus programs on your computer, restart it, and try to sync it again.
    They are most likely interfering with iTunes.
    If this does not work, create another user for your computer (as an Administrator), and try to sync your ipod on that user.

  • Kernel panics during boot and other fun

    It started a few weeks ago when my iMac G5 wouldn't wake up from sleep (it had to be restarted). Last week I started getting random kernel panics, and yesterday after one such panic it would no longer boot.
    Also last week the computer beeped three times instead of the normal boot sound, although that only happened once.
    Usually it will get a kernel panic or simply freeze during the Apple logo/pinwheel screen. Sometimes it will crash before the screen even comes on (denoted by loud fans). A few times it froze on the blue screen.
    I took out the RAM and reseated it, but that didn't solve anything. It is the original RAM that came with the computer, so that's probably not the problem. I zapped the PRAM, and that didn't help, nor did starting in Safe Mode. I guess I'll try booting from the Leopard disc next.
    Any idea what this might be, and if I can fix it without bringing it in for service?
    Message was edited by: Tyler Dykstra2

    If you have not already done so, except for the keyboard & mouse disconnect all devices from your computer & check out the following:
    http://docs.info.apple.com/article.html?artnum=106805 Mac OS X: "Broken folder" icon, prohibitory sign, or _*kernel panic*_ when computer starts
    User Tips: Kernel Panics
    G5 iMac Repair Programs
    **WARNING: DUE TO SECURITY REASONS, PLEASE DO NOT POST YOUR COMPUTER'S SERIAL NUMBER ON THESE MESSAGE BOARDS.**
    ==================
    Which "model" & "generation" G5 iMac do you have?
    Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
    http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
    You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
    Thank you

  • Ipod Touch freezing during synchronizing

    I have a Windows XP SP2 pc. When i connect my Ipod touch to my pc and let it synchronize some mp3 songs or photo's, Itunes freezed after a few seconds, so it has synchronized always 3 or 4 songs instaid of for example 300 songs i selected for synchronize.
    I have reinstalled Itunes 7.5
    I have reset my ipod touch and reinstalled the operating system
    But what i try it always freezing. So the point is i cant do nothing with my ipod touch at this way. With my ipod 4g clickwheel i have no problems at all during synchronizing.
    I have a Windows XP SP2 pc with 1 gb ram and 6 USB 2.0 slots
    I have had reinstalled my windows XP last week ago.
    What can be the problem??

    Hi,
    have you tried to use another of your USB slots? Are those at the computer or provided via a powered hub? If the latter, try to use one on your computer, probably one on the backside, to make sure no internal hub is used.
    Volker

  • IPod 5G Freezes During Flight

    I have a 60G iPod Video that freezes during flights. I've flown twice now with my iPod and each time it freezes and becomes unuseable until landing. Has anyone encountered this and have a solution?

    I would never break that rule...of course those "mean" folks known as attendants are always on the lookout for rule breakers like me! In all seriousness, it happened during climbout on one occasion. But on the previous occasion I didn't pull out my iPod until we were already at altitude and well into our flight.

Maybe you are looking for