My ipod is in disk mode and says  "ok to disconnect" now what ? its a 20gb 2004 apple ipos model No A1059

i got my old 20gb 2004 apple ipod into disk mode. what do i do know it says ok to disconnect how do i use this disk mode can someone help me out here thanks

Disk mode can be used for accessing the device as an external hard drive, e.g. to use to copy files from one computer to another.
See Putting iPod into Disk Mode and Reset your iPod.
tt2

Similar Messages

  • TS1372 I have iPod Classic in Disk Mode and when i connect it to my apple computer it does not appear in iTunes and the screen displays a message saying "Do not disconnect" with a circle with a line through it, flashing. What do I do now?

    I have iPod Classic in Disk Mode and what do I do next cause it's not showing up in iTunes?

    Does the iPod appear on your desktop as an external hard drive?  Has the iPod ever successfully connected before?  Disconnect your iPod and reset it using the Select (Center) and Menu button combo.  Then reboot your Mac, open iTunes, and reconnect your iPod to a high powered USB 2.0 port and see if it's recognized.
    Have you worked through all the troubleshooting here?
    iPod not recognized in iTunes and Mac desktop
    B-rock

  • None of the changes I make to system preference or the dock will hold after restart. I've cleared the RAM, run disk repair and reinstalled the OS. Now what?

    None of the changes I make to system preference or the dock will hold after restart. I've cleared the RAM, run disk repair and reinstalled the OS. Now what?

    MobileMe closed on July 31, 2012.
    It is true that the only way to sync your Mac with iCloud is to upgrad.  You need to be running OS X Lion 10.7.2 or higher in order to sync your Mac with iCloud.  At this point, you can upgrade directly to OS X Mountain Lion from the version of OS X you are now running (10.6.8).   You can purchase and download the Mountain Lion upgrade from the Mac App Store for $19.99.  After upgrading you will see iCloud in System Preferences.  This guide explains how to sync your Mac with iCloud after upgrading: http://www.apple.com/icloud/setup/mac.html.
    Once all your devices are signed into the same iCloud account and you have turned on your iCloud data syncing, you will be able to keep them all in sync using iCloud.  You will still have to sync with iTunes to manage your iTunes media such as music, movies, podcasts, etc.  You will have the option to either continue backing up automatically with your computer when you sync with iTunes, or to back up your iOS devices automatically to iCloud every 24 hours (as long as they are connected to wifi and your chargers).

  • HT4235 Itunes only sees ipod nano in disk mode and still won't sync it

    I have to place my ipod nano in disk mode for itunes (or Windows for that matter) to find it. In disk mode Windows and Itunes see the ipod and it passes all the diagnostic tests save for the sync test where it can no longer see the ipod and apparently a file is also not found. I'm ready to just reset it, but am unable to make that happen.
    This problem began when I downloaded some songs from Amazon and fumbled the job purchasing and downloading some of them twice. Not very smart, but it was late. Anyway, I also downloaded their Cloud player and had it pass the songs to itunes. It was in itunes that I saw the duplicate copies of the songs. Itunes and the cloud player proceeded to butt heads, I deleted the the extra song copies and also uninstalled the Amazon cloud player. Then itunes went into the state I've described above.
    I'd appreciate any help.

    Hi GChild6,
    If your iPod is being recognized as a disk, you may find the following article helpful:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Regards,
    - Brenden

  • My ipod is in recovery mode, and will not restore in itunes. Its stuck on "connect with itunes" screen

    I dont know what to do . Like.. Am i supposeto put it in "disk mode?" idk how to . What is the pause and play botton on an ipod touch... ??

    What happens when you try to restore via iTunes? Error message?

  • HT4235 my ipod says disk mode and will not let me do anything.  what is going on?

    my ipod says Disk Mode and seems to be locked.  What should i do?  this is new to me.  Has never happened before.

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons

  • Why is my ipod nano 5g always stuck on the apple logo when i turn it on.I have put it n disk mode and repaired it with microst essentials and it says all was fixed but when i restart it it still is stuck on it.Also itunes doesnt reconize it

    so when i turn of my ipod its always stuck on the apple logo.Ive tried disk mode and it still doesnt work.Also it isnt reconized on itunes so i need help badly

    Did you try rebooting the iPad? You will need to have some battery power for this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This may be helpful
    iPhone, iPad or iPod touch: Not responding or does not turn on
    Frozen or unresponsive iPad - Apple
    iPad: Unable to update or restore

  • I forgot my password and am trying to reset my ipod,but it won't work. It says that my ipod is in recovery mode and that I must restore it. I click ok, and then restore, and then restore and update. then it says contacting ipod software update server and

    I forgot my password and am trying to reset my ipod, but it won't work.It says that my ipod is in recovery mode and that I must restore it. I click ok, and then click on restore and update. Then it says connecting ipod software update server and a screen pops up with ipod software update on the top and iOS 5.1. It lists a bunch of stuff this update contains and on the bottom it says next, which I click and nothing happens, it just goes back to the ipod restore page. Help, what am I doing wrong?

    This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
    Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
    Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
    Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
    Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.

  • My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • Ipod nano stuck in disk mode and reset mode

    My ipod which I haven't used for long came into my sight and i triedto use it and the battery was out. OK, so I charged it through my computer Windows XP with the usb. Of course my itunes program detected my nano. And it kept telling me to upgrade my nano so I clicked OK. after 2or 3 mins it was completed and it said to wait until nano reboots itself. But it won't... so i pulled it out.
    Ok when i turned it on the gray screen with the apple logo in the middle appeared. It won't move anymore so I resetted it by pushing the center and the menu button and endless circulation began. 4secs later it blacked out and right after, the gray screen appeared again and again..until the battery wasout ..So I came here and knew about the center and play button so I tryed it worked so I was able to see my ipod on my itunes ,which did not appear before,and now it keeps on telling me to restore it because it was damaged. so I did. and now it came back as new. I wrote my new apod name ...etc. and after that I pulled it out. now it's stuck in disk mode and I can't move on,,,
    I'm sorry the article is long but please help me!

    Thank you, it worked just fine. I guess Apple has replaced operating instructions for these forums! Again, thanks for the help.

  • Ipod will not turn on, itunes will not open, window says ipod is in recovery mode and needsto be restored

    ipod will not turn on, itunes will not open, window pops up says ipod is in recovery mode and needs to be restored. what do i do now?

    You restore the iPod via iTunes. Don't plug the iPod in. Open up iTunes and then plug it in and then try restoring, if it fails to restore a few times, keep trying. I do it on a daily basis, you're using an Apple product, remember...
    EDIT: Do it from another computer if all else fails.

  • HT201263 my ipod mini is stuck on disk mode and do not disconnect sign in the middle how can I get it to start working

    Can someone please help with this issues

    What is an iPod "mini"?
    The iPod touch does not have a disk mode and this is the iPod touch forum.

  • In Disk Mode and songs won't transfer from IPod to ITunes

    When I called Apple, the gentleman told me that I first needed to put my IPod into Disk Mode. I got my IPod into disk mode and thought I'd be able to transfer songs very easily, atleast it was last time. I had to reinstall ITunes and lost my Library so I thought I could just pull them off my IPod. Anyone have any ideas?
    Thanks!
    IPod Mini    

    These links will give you several methods of recovering whatever songs remain on your iPod; some free, some third-party software, some more comprehensive for restoring Playlists, Ratings, Play Counts, etc. Read them and their associated links before deciding on a strategy that works for you. There are many various third-party software programs that will offer a more robust process, or an easier GUI. Do a Google search for them if the links below leave you wanting…
    Don King Resurrected: Deleted files from hard drive (free user steps – music recovery only)
    MacMuse: Computer Crashed (free user steps – music recovery only)
    Copying music from iPod to computer (a primer on various methods and software)
    Copying Songs from Your iPod to a Mac or PC (resource for 3rd party software)
    iPodRip Software
    PodUtil Software
    YamiPod Software (Mac & Windows)
    PodPlus Software (Windows)
    TuneJack Software (Windows)
    Senuti (Mac OS X v10.3 or higher Recovery Utility)
    XPlay (Windows software For Music Recovery &/or Cross-Platform Functionality)
    XPlay Photo Browser (For recovering Photos)
    Extremely Simple Method: (just to recover the song files – may not work on a Mac)
    1 - Open iTunes
    2 - Edit=>Preferences=>’Advanced/General’ tab
    2a --- Select ‘Copy files to iTunes Music folder when adding to library’: checked
    2b --- Select ‘Keep iTunes Music folder organized’: checked
    2c --- Click OK to store changes
    3 - Attach your iPod to the PC and hold down the ‘Shift+Ctrl’ keys until the iPod is fully recognized (this will defeat the auto-sync process)
    4 - If you get a dialog box to link the Library, decline this option
    5 - Within iTunes: Edit=>Preferences=>’iPod’ tab: switch iPod to manual transfer – click ‘OK’
    6 – Eject iPod
    7 – Close iTunes, then reopen iTunes and attach the iPod (it’s in manual sync now)
    8 – File=>Add Folder
    9 - Browse to and open ‘My Computer’ (click on the ‘+’) and select the iPod
    10 - Click OK
    -- The music files should start to transfer back into iTunes with its correct information
    –-- This will take some time depending on your PC’s speed and the amount of songs on the iPod
    No Playlists, or Ratings, Last Played, & Play Count attributes will be transferred from the iPod to iTunes using this method.
    If you have problems with seeing the iPod within 'My Computer', try again switching your update method to 'manual', detach the iPod, then reconnect the iPod to the PC.
    After recovering your Library, strongly consider developing a thorough backup strategy for just this type of situation (and many other potential disasters).
    You need at least two full sets of your music, not including what is on the iPod:
    -- One full set on the PC within iTunes (on internal HD or ExHD)
    -- One full set on an separate external backup medium (CD/DVD/ExHD/other)
    -- One (full or partial) set on the iPod
    Music files on just the iPod and only one other medium is not considered having any backup.
    If you cannot store your complete music files on the computer’s internal HD, then create and maintain at least two external sets (any multiple combinations of ExHDs, DVDs, CDs).
    Backup both the music files and the Library database file (iTunes Library.itl). What are the iTunes Library files?
    Here is a post on developing a thorough backup strategy:
    http://discussions.apple.com/message.jspa?messageID=1583994#1583994

  • My ipod was in recovery mode and fixed it. i can use it. but the problem is whenever am i connect it with itunes it says IPOD is in recovery mode even after recover is done. i cant sync ipod rite now. it showing same msg again. nyone knows wat to do plz??

    my ipod was in recovery mode and fixed it. i can use it. but the problem is whenever am i connect it with itunes it says IPOD is in recovery mode even after recover is done. i cant sync ipod rite now. it showing same msg again. nyone knows wat to do plz??

    I did the restore and it cleared and reset the iPod but after it finished the same error came up. I tried this 3 times. Also it no longer shows up as a drine in My Computer.
    if it's relentlessly doing that to you, it's plausible that the message is being caused by a Windows drive letter confusion. (that's consistent with the disappearance for My Computer, too.)
    see the following article for troubleshooting information on that possibility:
    "iTunes has detected an iPod in recovery mode - Use iTunes to restore"

  • IPod is in Recovery Mode and when I Try to connect my itouch it says it cannot connect because it is locked with a password, but I cannot unlock it since it is in recovery mode! Help!! Pleaseee

    iPod is in Recovery Mode and when I Try to connect my itouch it says it cannot connect because it is locked with a password, but I cannot unlock it since it is in recovery mode! Help!! Pleaseee

    Try putting it in DFU mode and then restore.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Maybe you are looking for

  • Adobe Camera Raw Update in Photoshop CC

    Problem is my Lightroom 5 is using ACR 8.4 but when I use Ctrl E to send my photo over toe Photoshop CC for editing in TIFF it always says that the ACR is incompatible as a different version with the ACR in Photoshop being only only on version of 8.3

  • PhP and XML

    I have recently just started using php and understand the concept behind server side scripting. I was arguing with a co worker about which would be better: If I were to use php to run a query on some data in MySql and pass the data back to flex...now

  • List of Database server running in particular server ????

    Hi all, I have a problem. Now I have to write a class which has to check all the database server (oracle, DB2, SQL Server, Informix, MySQL, ...) in one server (only one server) and list all of them for users. Is there any idea??? Thanks

  • USB (Raw) - How to access VISA property: USB Bulk-Out pipe?!?

    I'm trying to use my own USB device. Since I'd like to use more then one USB In/Out Endporint I need to change that Atribute in NI VISA using LabVIEW (afaik. NI VISA uses the lowest Endpoint Number as defualt). According to LabVIEW 7.1 Help > VISA >

  • Trying to design Point of Sale page

    hi gurus, I am trying to design an EPOS page. I have a field which will hold barcode value. Using this value, I will retrieve item name, selling price and other necessary info from table and will display these value somewhere on page. I want to have