My ipod is jailbroken and i tried to restore it but now it wont turn on, what do i do now?
My ipod is jailbroken but i tried to restore it so it wouldn't anymore but now it wont turn oon, it shows the apple logo for like 30 seconds then the green pois0n logo for like a minute then it turns off and starts again.
can someone please help!!!
i am desprate for for ant suggestions!!!
Jailbreak is against Apple's policy about using its product.
It does exactly what oyu have experienced ... your product is bricked.
Apple will not help, and this forum will not help.
Similar Messages
-
my ipod touch was interrupted during an update and now my itunes cant recognise the device, and ive tried to restore it but it just keeps coming up with the usb and itunes picture. how do i fix this? Please help
http://support.apple.com/kb/HT1808
-
my ipod was disabled and i tried to restore it, now i am downloading an apple software update which is taking a **** lot of time and ipod is still disabled.. will it be ok after the download ends? help please..!!
We need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.
-
My Motorola droid razr M is stuck at the M logo and i tried the factory reset but it didn't work. What do i do?
MrMJG,
Let's get your phone back up and running. Have you been able to try to press and hold the volume down and the power button at the same time for approximately 10 seconds? The phone should reboot for you. Is there any kind of physical or liquid damage to the device? Please keep me posted.
KevinR_VZW
Follow us on Twitter @VZWSupport -
I turned off my phone and threw it, now it wont turn on, what do i do?
i turned off my phone and threw it, now it wont turn on, what do i do?
try flushing it?? how far did you throw it? did it land on a hard surface? soft? in water? really you threw it? bravo. I'd like to throw mine after installing iOS5. device I loved is now a total piece of crap
-
i forgot my password for my ipod and tried to restore it now it wont turn on. not sure what to do. HELP?
The first way you can connect the iPod to the computer it was originally configured on, and open iTunes. When you disconnect iPod from the computer, it will no longer be locked. You then can go into the preferences and turn off the lock. If you don’t have access to the original computer or it just does not work, you can jump to the second method. The best fix for any iPod problem is the classic “restore your iPod to factory settings.” That this will erase all data on your iPod and take you back to day one, but you can just add your music and data back to iPod from iTunes. This is the true benefit of the iPod / iTunes relationship.
-
TS1591 I Jailbroke my ipod and tried to restore it but it will not turn on
I Jailbroke my ipod then i tried to restore it, then after i thought it was restored, it got stuck on the apple screen and isn't recognized by itunes when I plug it in
That's what happens when you jailbreak. You have violated Apple's terms of use and warranty and won't be able to get help here. All I can say is try Recovery Mode here: http://support.apple.com/kb/HT1808
-
i just baught my first iphone and it is a jalbroken and factory unlocked version of an iphone 4 running ios 6.0.1. I dont like the fact that this phone might potentially be illegal with the "jailbreak" so ive been trying to restore it back to the factory unlocked settings, but every time i do i get error codes. when it the phone is running normally i get an error code 21 and when i try to run it in recovery or DFU mode i get either a 1601, 1602 or 1604 error code. please help!
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Gateway NV78
iTunes 11.0.1.12
QuickTime not available
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver 1.63.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 001ABCD80B980CB0
Current user is not an administrator.
The current local date and time is 2013-01-03 12:06:39.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {3684E32D-4846-436A-B1F8-95238FCB0EFA}
Description: Broadcom NetLink (TM) Gigabit Ethernet
IP Address: 192.168.1.37
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Thu Jan 03 11:10:09 2013
Lease Expires: Fri Jan 04 11:10:09 2013
DNS Servers: 192.168.1.1
Adapter Name: {00BC4D36-12D6-4016-8BC0-DB5C01069066}
Description: Intel(R) WiFi Link 5100 AGN
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-01-03 11:50:45.
**** Device Connectivity Tests ****
iPodService 11.0.1.12 (x64) is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
Sox’s iPhone, iPhone 4 (GSM) running firmware version 6.0.1
Serial Number: 8003494TA4T
**** Device Sync Tests ****
Sync tests completed successfully.SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here. -
HT1212 i have forgotten my passcode and i have tried the restore option but it just wont work
I tried restoring it but it wont work it just keeps coming up with the sign saying "you cant use itunes with this device until you put in passcode". And its getting really fustrating please help
If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.
-
I tried to download ios6 but ended up loosing my ios5 and i tried reloading ios5 but it keeps showing error messages, what should i do
hi there,
if I remember correctly the error code -1 indicates a hardware problem. In that case, you should take your iPhone to an Apple store and have them do some diagnostics.
See http://support.apple.com/kb/TS3694 for details.
regards, Chris -
Hello: My 4s phone turned off and when I tried to restore I got a 4014 error. What is this error and how do I restore the phone?
Hello Linda,
Thank you for the details of the error you are getting when trying to restore your iPhone. I recommend the steps below for error 4014:
Error 4000, 4005, 4013, 4014, and 4016
After you perform each step, try to restore your device.
Restart your computer.
Disconnect all your USB devices from your computer and connect to another USB port.
Use a different USB cable.
Uninstall third-party security software.
Try restoring using an alternate computer.
You can find the full article here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694#error4000
Thank you for using Apple Support Communities.
Best,
Sheila M. -
plz help me out for error 1015
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state. -
My phone died and i charged it overnight but now it wont turn on what do i do?
Okay so my phone had died last night and my charger works fine so i went to charge it and of course the battery icon shows up so then i went to sleep i just woke up to see if it's on and it wasn't i tried re booting it but that wont turn on either, then i went to plug it in my computer and my iPhone icon didn't pop up, now i don't know what to do, someone please help.
Thanks Lawrench Finch. My iphone was not responding and i became worried about it . Then i opened this apple support and found your advice and this has worked.
Once again than\k you.
Pradeep -
2 hour update and wont let me log in into my ipod so it wont even work
Try here:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
What happened when you tried to update? Error message? -
I have the latest ipod nano (7th gen, 16gb) and I use it mostly on bluetooth. When the battery dies during use with the Bluetooth it doesn't take a charge, the battery doesn't turn on and of course the computer doesn't even acknowledge that it's plugged in. This is my second nano in just over a month, the same thing happen with the first one. I just want to know if their is a way to fix this so I don't have to keep sending it in? Or maybe pay the difference to upgrade to a touch?
If the battery has been completely depleted on the Nano (not really a good idea) then it is going to take 15 to 30 minutes before your computer can see it. Same thing will happen with an iPod Touch.
Maybe you are looking for
-
How to prevent downloading wsdl in weblogic web service client
Hi, I get a problem regarding weblogic web service client. My working environment: weblogic server 8.1 Windows XP SP2 JDK 1.4 I use the weblogic tool to generate the client jar file from the wsdl file. <target name="generate-client"> <
-
No sound of any kind after ios8 update
Recently I updated my iPad to iOS 8 and the subsequent updates. Since then there has been no sound at all. When I start music, the playlist will skip through all the songs, eventually crashing. When I start apps they don't work or don't have any soun
-
Extra Firefox transparent window stays open in WIndows 7
Hello, I am using Firefox 35.0.1 and just today something strange has started to happen. In my task bar when I open Firefox as I am sure you know, an icon appears in the lower left. As you also probably know when you open more than one window you can
-
File Sharing between Snow Leopard, Lion
Today, I successfully installed Snow Leopard and Lion on separate partitions. Did a clean install of Lion and it is running 1000% better than when I installed it as an upgrade over Snow Leopard. Additionally, I also have Windows 7 running in Boot Cam
-
ItemStateChanged function calling on page load - How to avaoid?
Hi, I have one combo box in my application. When i m going to select combo box value, the listener will be called. Now what my issue is i have to avoid to call itemStateChanged() function when the Frame is opening in first time. Pls anyone give solut