My ipod is not coming up on my computer or syncing to iTunes

You know when you plug in you ipod into the computer or charge it in an outlet. it makes a sound, letting you know it's been connected. mine isn't doing that. It will charge my ipod but it doesn't show on itunes. i've rebooted, updated, and nothing is working. i don't know what else to do

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar       

Similar Messages

  • How do a I get my ipod touch to be recognized by my computer to sync with itunes?

    How do a I get my ipod touch to be recognized by my computer to sync with itunes?

    Maybe it's the cable. Try with another one. Or may also be iTunes. Try Reinstalling it.
    iPod not recognized in 'My Computer' and in iTunes for Windows

  • My ipod is not being recognized by my computer AND itunes

    When i connect my ipod, its not getting recognized by the computer AND itunes. i've read all the troubleshooting things and nothing works. is there someone who could help me please? i can't put any music, movies or anything on my ipod and just a while ago, all my songs got deleted so i'm listening to very little music now. please help me!
    from,
    troubled travieso

    Did you try using another usb port? my hardrive has two maybe yours does. And if you have a game console, some of those have usb ports so plug your ipod in there and see if that reconizes it.

  • Just bought new iPod touch. When I connect to computer to sync it tells me "iTunes could not connect to this iPod touch. Could not send a message to device." Not sure if it is b/c of an older version of iTunes but connecting via wifi sync unacceptabl

    Just bought new iPod touch. When I connect to computer to sync it tells me "iTunes could not connect to this iPod touch. Could not send a message to device." Not sure if it is b/c of an older version of iTunes but connecting via wifi sync unacceptable

    What version of iTunes is on the computer? You need at least 11.4.

  • I forgot my passcode. ive read all the replys and instructions on restoring. my problem is my ipod is not even showing up under devices when im n itunes. help

    i have forgotten my passcode. how do i do a restore if my ipod is not even showing up under devices when im n itunes?

    - Place the iPod in Recovery mode and then try to restore via iTunes.
    - Also see the following as necessary:
    iOS: Device not recognized in iTunes for Windows
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • I tried to restore my iPod Touch 2nd generation and now it won't sync to itunes.  on the screen it shows the usb end of the cord and the iTunes logo over it.  Is it broken?

    I tried to restore my ipod touch 2nd generation  and now it won't sync to itunes.    On the screen is the USB end of the cord and the iTunes logo over it.
    I have turned it off and on,  held the off button down and  the select button down but it still comes up with that picture on the screen.    Have I broken it?
    Please help.
    Mimi

    It means the device is in recovery mode.  You'll need to reconnect it to iTunes and restore it again.
    You may need to connect it in recovery mode manually using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • I have a 3GS iPhone, version 3.1.2.  I have never plugged my phone into a computer or synced with iTunes.  If I do so now, I will I lose everything?  What steps need to be taken to ensure that all of my data, contacts, photos, etc. are not lost?

    I have a 3GS iPhone, version 3.1.2.  I have never plugged my phone into a computer or synced with iTunes.  If I do so now, I will I lose everything?  What steps need to be taken to ensure that all of my data, contacts, photos, etc. are not lost?

    IOS: how to back up  http://support.apple.com/kb/HT1766

  • IPad with retina is stuck on error message that iPad is unable to back up.  When hit ok, the message does not go away.  Cannot power down.  Don't have computer to sync with iTunes.  Now what?

    My coworker has a fairly new iPad with retina display.  She has an error message that the iPad has not been backed up and needs to back up when locked, on wifi, and connected to a power supply.  It has an ok button to acknowledge the message.  Every time she hits the ok button, the error message remains.  She is unable to power down because the error message stays at the top and disables the ability to use any other touch portions of the screen.  She tried using Siri to reboot, but Siri was of no help.  She just kept saying that she does not wear boots.  Holding the power button down for an extended period also did not help.  She does not have access to the computer that has her iTunes on it, so she cannot sync it via cable.  She also does not want to do a reset because she has several photos that she does not want to lose.  What can she do?

    Try holding the Home and Power keys at the same time for approx 10 seconds or until the Apple logo appears, this will 'reset' the device - it won't lose any data doing this, let us know how you get on.
    Regards,
    Steve

  • My ipod is not showing up in the left hand column on itunes. I have tried the trouble shooting methods but nothing is working. My ipod nano also will not play.

    My ipod nano is not showing up in the left hand column of itunes. It says connected on the ipod and I can find it in my computer but its not there on itunes. I need it as I want to restore it to factory settings. I have tried the troubleshooting methods that are on the Apple website but no luck.
    Also my ipod is not playing. I found a way to upload all my music to my new computer. I followed a guide given to me on wiki and it worked. However, since then I cannot get the ipod to play. The menu is there, it turns on, all the playlists are visable but when I press play it does nothing or flicks briefly on to the page to play but then flicks back to the list again. I have tried all the troubleshooting on the Apple website but again nothing. I wanted to restore it to factory settings but to do this you have to be able to access the ipod in the left column on itunes which obviously I can't do. That was happening before the ipod stopped working. The two issues are separate.
    Thanks and hope you can help me.

    I have sorted it myself!!
    Ipod is now in the top right corner, last time I clicked on it, it ejected it but by clicking on the actual ipod icon then it brings up your ipod. I restored it to factory settings and synced all my music and it now works again. Hope this can help anyone who ends up with the same problem.

  • My ipod will not stay connected to my computer.  When first plugged into the usb port, I can see it as a drive.  Within seconds it disappears.  If I look in the devices area, I can see it but it has a yellow triangle with an exclamation point beside it.

    When I connect my ipod to a usb port on my computer, I can see it in my computer as a drive for a few seconds and then it disappears.  It can be seen under devices but as a yellow triangle with an exclamation point in it.  If I run trouble shoot, it states windows is disconnecting this device. 
    I can see it in itunes as a device.  However, this is a brand new computer, running windows 7.  My last one bit the dust in mid use.  I want to save the songs on my ipod and to do that I believe I need to be able to see the files on the ipod.
    Any help would be greatly appreciated.

    Great Troubleshooting on your own so far!. (If you got 2 PC and 2 iPod would be much easier, some of the people in this community has more than 2 of each.)
    Hope you did not connect it to a USB Hub, the sync cable must be plug in directly to a USB2 port at the back of the Desktop Computer.
    If you have a spare Notebook, with iTunes, connect it to the Notebook, to check if the iPod is working or hung.
    Can you iPod run and play songs, when disconnected from the PC? (Sorry, for just asking the obvious)
    Anyway, just hard reset your iPod, so that we can start from scratch
    1. if your iPod is hung, reset it by pressing Menu and Center button for at least 10 secs till the Apple logo, comes on. (this won't delete your songs in the iPod, if they are not corrupted))
    2. Connect it back to your Notebook or Desktop.
    if your iPod screen is dead, try charging the battery by connecting it to another computer. if it doesn't connect to successfully to another computer, it may need servicing.
    Good luck!

  • My ipod Touch is NOT uploading info to my computer when syncing

    I have had this iMac in the genius bar TWICE in 24 hours...and of course they just did their "job" by just reinstalling the OS..I could have done that at home and saved me all that trouble...a corrupt file was picked up online and it messed with everything,not opening Safari(I do not like it anyway)...but now I am doing just the SIMPLE things to get back my computer & iTouch....and it is not uploading data I input on the iPod to the computer when syncing. I have had an Apple computer(s) for over 20 years...and this is the worse one ever, even thinking of switching brands, it's that BAD!
    Thanks for help!
    Tony(NYC)

    Welcome to the discussions,
    can you sync your purchases from the ipod to iTunes? Try to download a free app using the ipod and choose "Transfer purchases" in the File menu in iTunes when you have connected your device. Disable autosync first. Also make sure your iMac is authorized in the Store menu and you did a reset of the sync history in iSync/settings. Make sure to have at least one contact set up in your address book on your mac before you sync your contacts.

  • IPod will not update when plugged into computer?

    Just recently my iPod with not update when I plug it into my computer. My iPod does not show up on my Mac or my iTunes. When I plug it in the screen shows the do not disconnect sign. I have tried to reset my iPod and checked for new updates, but they haven't worked. If anyone knows what to do that would be great.
    Thanks

    Yes. Since I installed the new system software (10.4.6) update Sunday night, I cannot update any of my iPods except the iPod video. The iPods also do not show up on my desktop. The battery charges but that's all that happens.

  • My ipod will not be recognized by my computer,I pluged myipod 2nd g into my computer,went to settings and erased all contents now all i get is thepicture of a usb cord and itunes at the top how can i fix this?

    My ipod is displaying a usb cable at the top of it is itunes,i get a message on my computer saying the usb is not reconized.my ipod will not go back to the original when i unplug it from the computer, help

    See Here...
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    This will not necessarily work if the Device has been modified.

  • Ipod touch not recognized by usb to computer, the computer beeps, but nothing opens nor charges ipod, ipod touch not recognized by usb to computer, the computer beeps, but nothing opens nor charges ipod

    I can not connect my Ipod touch to my computer. it's not recognized anymore. It beeps when I plug it into the USB but doesnt charge,
    or anything. It's not recognized on MyComputer anywhere, I cant sync...nothing.. I went through everything on the Itunes page under diagnostics, but
    still nothing.

    Did you reinstall itunes, using a new download from the Apple homepage?
    Is your ipod showing in the system profiler/ usb highspeed ports?
    Did you already reset the ipod by holding the sleep and home button until the Apple logo comes up?
    Did you try to connect in recovery mode? http://support.apple.com/kb/HT1808

  • My Ipod is not recognized on windows 8. I just reinstalled Itunes on the computer, but nothing

    My Ipod is not recognized on windows 8. I uninstalled I-tuns, and then reinstalled it, but still no Ipod shows up

    Did you do everything here:
    iOS: Device not recognized in iTunes for Windows
    Including
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

Maybe you are looking for

  • SAx Output non XML Compliant (Part 2)

    This is the question I asked before: http://forum.java.sun.com/thread.jsp?forum=34&thread=471553&tstart=0&trange=15 my doubt is: what happens when the & character appears in the input data? I.e. not written by me in the XSLT styleSheet. Is there anyt

  • Cisco VPN connection drops on airport extreme on OS X 10.6.7

    I recently bought Airport Extreme and I must say the wifi coverage and strength is amazing compared to the DLink or Belkin routers that I tried. THe whole thing setup like in 2 minutes. Love it. Now the problem. I use CISCO VPN provided by work a lot

  • How to get around # sign

    I have to use '#DCDEE0' for a color background, but sometime CF interprets it as a variable and blow up because there is not ending # sign. What is the trick to get around this? Some screens work and some dont.

  • Retrieving time for default Btree and time sorted Btree

    Hi all, I am working on FreeBsd and Berkeley DB 4.5.20 I have 2 kind of Btree databases and I want to measure the time for sequentially retrieving of all records. 1. Btrees with fixed record size of 128 Byte 2. Btrees with variable record size of aro

  • Missing information on form

    We have an issue with some of our adobe forms in which data has been entered by the user but is not populating when the form is brought up or printed. Has anyone run into this before and if so how did you resolve this issue.  This is affecting numero