My iPod is not recognized by anything when connected USB. Firewire works.

Ok, so I haven't been able to put songs on my iPod for at least a month now... reason being, my computer doesn't recognize it. Hooking it to USB gives me this error message:
http://img79.imageshack.us/img79/1397/ipoderror28ea.jpg
However, it charges with Firewire (although obviously I can't put songs on it that way). What should I do?

I have exactly same error although my iPod version is 2.3. Initially got the error when I did not disconnect correctly (pulled USB out!!) I have successfully installed a new USB 2.0 & tried the reset options short of totally wiping my iPod clean but still get the Windows malfunction error. Once I get all my music backed up I will try the total wipe but if anyone has answer in meantime then all the better
  Windows XP  

Similar Messages

  • My 1st gen Ipod is not recognized by Itunes 9 (connected by firewire)... is there thomething to do ??

    Hello,
    everything is said in the tilte. The ipod (the one like a white brick) is seen by my powerbook (shown on the desktop), and it is recharged, but it's invisible in the last version of Itunes.
    thank's for your help

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?
    The iPod Classic uses different drivers than the Nano

  • My 2nd generation ipod will not show on itunes when connected

    my 2 nd generation ipod does not show on itunes when connected

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Ipod touch not recognized by anything

    I have had my ipod touch for almost a year now and it has been working great. Until a couple months ago. It is not recognized by any computer in my house, so I can't charge it or put new songs on it. iTunes doesn't show up when I plug it in, i get no messages when its plugged in. The iPod simply turns on and does nothing. The weird part is that when I plug it into my iHome it gets charged and it works.
    I have tried the restoring and turning of the compter, etc. but nothing seems to be working. Has anyone else had this problem? I may have to send it off to be repaired, but maybe you could save me the weeks without my iPod by helping me fix this problem.

    Try these suggestions: http://support.apple.com/kb/TS2050
    Here are the iPod service FAQs: http://www.apple.com/support/ipod/service/faq/

  • IPod is not recognized by my computer's usb port and itunes

    Remove my ipod from the computer without ejecting it and now the ipod want turn on, it is not being recognized by my computer's usb port or itune.  I have reinstalled itune and still have the same problems.

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4. Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
    7. Check for third-party software conflicts.

  • 3rd Generation iPod is not recognized in iTunes or Finder with FireWire

    My refurbished 3rd generation 30 GB (used the battery replacement plan) all of a sudden is not recognizable in either iTunes of the Finder when connected to a FireWire port, which it has done many times. However when I connect it with a USB connection it is recognized, but when I go to restore the software, I’m told I need a FireWire connection by the warning windows from iTunes.
    Any suggestions?
    Looking at the postings, it appears that other iPod users are having the same problem.
    Hank Kearns

    Strange. Both of my Macs are PowerPC Macs running 10.4.10. My Third Generation iPod works fine. The only problem is that when charging it from the wall using the iPod Power Adapter it won't charge to 100 percent. Even after syncing it up directly to either my '17 iMac G5 1.8 GHz or '12 PowerBook G4 1.5 GHz it won't charge all the way. The Knowledge Base Articles I've read seem to indicate that in rare cases the iPod's logic board or Hold Switch may need to be replaced. So far I've replaced the 10 GB hard drive that died with a 20 GB hard drive, replaced the Hold Switch & replaced the Lithium Ion rechargeable battery. I think in my case the iPod logic board may need to be replaced. I originally bought mine refurbished & replacing the iPod costs about $299 according to Apple. Replacing the logic board only costs $65 though if you Google iPod with Dock Connector parts. The link shows up in one of the ads in the right pane of the search results. I really think Apple should recall the Third Generation iPods with defective logic boards. The least they could do is offer a logic board replacement program like they do for Macs.

  • External HDs not recognized by iMac when using USB cable

    I just bought a new iMac & plugged in my two Western Digital 1tb drives using the supplied USB cables and neither of them are recognized by my iMac.
    I've been using both of these drives with my other G5 iMac using the firewire cables & have not had any issues. I also purchased an adapter (USB -->firewire 800) and each hard drive mounts ... but neither will mount using the USB connections.
    Any suggestions as to how I can get the second drive to work using the USB cable ...
    Thanks,
    Brent

    +do I need to move the contents of the external drive off the unit before the partition?????+
    YES! Absolutely! The partitioning process erases the drive, so you need to temporarily copy data onto your old Mac.
    +how do I achieve this? I'm guessing there's a piece of hardware that I'll need to connect the two hard drives together and then feed another line into the iMac ... correct?+
    All you need are firewire cables (hard drive to hard drive to iMac). See Dennis' link and the excerpt here:
    +Question 7: Can FireWire devices be connected in a daisy chain?+
    +Answer: Yes, and if the devices are designed according to the FireWire standard, they can be turned on and off as needed. For example, all devices don't need to be powered on to use the last device in the chain. For the best result, and to avoid overstressing the FireWire port, connect one FireWire device to the Macintosh, then add one device at a time to the chain. Avoid plugging in live power adapters into devices connected to the chain.+
    And congratulations on your new iMac - you'll love it; I got mine about a month ago.

  • How do I get rid of files that only show up on my iPod, but not on my computer when connected? These files appeared after I reconnected my iPod to my computer, and appear to be music files linked to a website.

    I purchased an album on itunes and everything was fine. Then when I reconnected my ipod and it did some autosync (which I have it set up to do manual sync) it added every single song a second time, but apparently they are some sort of internet file, that will only play when I have internet connection. These files won't show up through my computer at all and I can't figure out a way to delete them directly from my ipod either. It's incredibly annoying as when I try to listen the album it plays through two songs, then automatically quits playing when it gets to these phantom files...

    This is not an itunes question at all.
    Try posting in a more appropriate forum.

  • Ipod 4th gen doesn't charge when connected with firewire

    when I connect my iPod with usb, it mounts and charge, but when i try to charge with firewire cable (connected to a PPC G4 or to my apple ipod firewire power adaptater), it doesn't(it mounts on my desktop, but doesn't charge...)... i realized it doesn't work after updatig the 1.2.1 version of software for windows....
    actually, My ipod works with the version for windows because i'm working with a Mac and ... a PC...
    Does anybody know what happens with my ipod???
    533 MHZ PPC G4   Mac OS X (10.3.9)   768 Mo SDRAM hd 280Go

    It can be caused by different things, please check the following one by one:-
    1. Check your firewire cable, is it a faulty one? have you tried another on?
    2. Do a Reset for your iPod and reboot your Mac again
    3. Make sure you turn the insight off, if any
    4. Redo the Restore to factory setting again (using the latest version of iTunes 7.1)

  • Ipod not recognized by anything on my computer!!!!

    My ipod is not recognized by anything on my computer. When i plug it in it says "do not disconnect", but it won't show up in itunes or ipod updater. I have taken it to the Genius Bar at an apple store here in town.....but they said that it was pretty much ruined since i do't have a warranty any longer. I am really upset that it so far cannot be fixed. I would like to fix it instead of buying a new one, because i love this one so much! Please Help.....Please Help!!!
    Preston.

    Go to the Apple Shop again, and ask them a favour for doing a Restore for your iPod but with a Mac computer. It is very likely to get mount with a Mac, once it has being completed, bring it back and plug it with your PC, and do a Restore back in PC version

  • IPod Won't Power Up, Even When Connected to Mac

    I'm trying to figure out if there's any chance this could just be the battery, or a more catastrophic failure (harddrive, etc.). The iPod will not power up, even when connected to the Mac, and will not mount as a removable drive either.
    I've been having trouble with the battery for some time now (it will only hold a charge for about an hour, two tops) but I would think that even if the battery failed outright it would still work when plugged in (either to the wall, or to the Mac).
    Does anyone know for certain if that is the case? I'd hate to waste any money sending this off to ipodresq.com for a battery if it's something more serious. (And this one is so old, if it is a harddrive failure or anything like that I'd be better served to buy a new one.
    G4 933 (Quicksilver)   Mac OS X (10.4.4)  

    Thanks for those links; I performed a hard reset and that seems to have brought the iPod back to life, at least for now. I suspect that the battery is no longer holding any significant charge and needs to be replaced, which might be why it locked up in the first place.
    So now I get to decide if this 1st gen iPod is worth the money to replace the battery, or if I should just finally buy a new one. (I definitely do not want one of those rumored touchscreen models, though, if they turn out to be reality... impossible to navigate by touch alone while driving, and I have no use for video on an iPod - I want to watch video BIGGER, not smaller!)
    Thanks again!
    G4 933 (Quicksilver)   Mac OS X (10.4.4)  

  • When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device

    When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device on the right hand side of itunes.

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • IPod is not recognized by Windows, iTunes or Device Manager

    I'm running Windows XP with external hard drive. When hard drive is connected, iPod will not sync and I get message stating "USB Device Not Recognized. One of the USB devices had malfunctioned..."
    When disconnect, iPod will sync. However, iTunes is on external drive; therefore musc is not syncing onto iPod. I've attempted the 5 R's as well as searching for iPod in Device Mananger. When iPod is conncected, it is listed in Devce Manage as "Unknown Device." Articles to solve recommend relettering device, bu how do I get it to be recognized by Device Manager?

    I HAVE A SIMILAR PROBLEM TO THAT I JUST BOUGHT MY 30GB IPOD VIDEO ABOUT 4 HOURS AGO, SINCE THEN I HAVE BEEN REALLY STRUGGLING TO INSTALL IT. A SOON AS I GOT IT, I DID EXACTLY WHAT IT SAID, I WENT TO WWW.APPLE.COM/IPOD/START AND DOWNLOADED THE NEWEST ITUNES VERSION. THEN I PLUGGED IN MY IPOD TO MY COMPUTER, AND ALL THAT HAPPENS IS A LITTLE BUBBLE OPENS UP AND SAYS "FOUND NEW HARDWARE" WHEN I CLICK THAT, IT OPENS UP, AND I CLICK "INSTALL THE SOFTWARE AUTOMATICALLY" WHERE IT SAYS IT, THEN I CLICK NEXT AND WAIT. AFTER, IT SAYS "THE HARDWARE WAS NOT INSTALLED BECAUSE THE WIZARD CANNOT FIND THE NECESARRY SOFTWARE".AFTER I WENT TO WWW.APPLE.COM TO FIND OUT WHAT THE PROBLEM WAS, I'VE LOOKED THROUGH AND READ EVERY ARTICLE THAT CAN PERTAIN TO MY SITUTAION, BUT NONE HAVE HELPED ME I AM DISPLEASED TO SAY, THE LAST ARTICLE I READ WAS THIS ONE:
    http://docs.info.apple.com/article.html?artnum=305136
    BUT EVEN THAT DOES NOT HELP ME BECAUSE WHEN I GET TO STEP 8 WHICH SAYS "Locate the iPod in this list. In some cases one of the entries will have "iPod" in its name. If no such entries are present, the iPod is most likely represented by "USB Mass Storage Device." I LOOK FOR WHERE IT SAYS "IPOD" OR "USB MASS STORAGE DEVICE" UNDER "UNIVERSAL SERIAL BUS CONTROLLERS, AND CANNOT FIND EITHER THING..I HAVE RESTARTED MY COMPUTER A NUMBER OF TIMES, I HAVE EVEN UNISTALLED ITUNES THEN REINSTALLED IT I HAVE STRETCHED EVERY OPTION AND NOTHING HAS WORKED..CAN SOME ONE PLEASE HELP ME??..I HAVE BEEN TRYING TO SOLVE THIS PROBLEM FOR 4 HOURS STRAIGHT STOPPING ONLY TO GO TO THE BATHROOM AND GRAB A BITE TO EAT..

  • IPod is not recognized in ITunes after upgrade to 7.3.1

    Please help. I upgraded ITunes to the 7.3.1 version and now my IPod is not recognized in my ITunes. The USB port is working since my IPod recharged when I plugged it into the computer. I uninstalled & then reinstalled ITunes, but, my IPod is still not recognized by ITunes or my computer. I cannot find it listed in "my computer" files.
    Any suggestions as to what happened? Thanks.
    J.
    Dell   Windows XP  

    Your post solved the same problem for me. Thank you so much! And thanks to JaketheSnake for starting this thread. iTunes used to start up automatically whenever I connected my iPod Touch, but a couple of months ago it quit doing that. I didn't think much of it as I just clicked on iTunes in the dock and opened it and went on my merry way. I just figured something in the last iTunes update changed it's behavior. But lately I noticed that my iPod Touch would be in the source list while it was syncing and then it would sometimes just disappear. I was too lazy to start a thread, I guess, because I just thought someone would tell me to "restore" my iPT and I had gotten used to my little "work arounds". But now it's fixed, thanks to both of you.
    Judie

  • My ipod is not recognized by itunes. Menus missing in itunes.

    After I updated my ipod and my itunes, now the ipod is not recognized in itunes.  I went through all the recommended steps; starting and stopping various programs on my control panel, turning ipod on and off, checking cables - everything short of standing on my head.  In the process of all that,  I realized that the menu/task bar on the upper left side of the itunes page was gone. It wasn't there when I started this odyssey and it still isn't there..  I uninstalled and installed itunes again. I have Windows 8. Still no menu and still not recognizing the ipod. My ipod is 32gb touch screen.  Probably 3 years old or so. Was working fine before the updates......
    Thanks!!!

    Hi All,
    I tried to download the update and iTunes doesn't work at all! It won't even open. I have tried all of the steps above but still no joy.
    Any help would be much appreciated as I have been on this for one week already.
    Close to my wits end and moving back to a Sony and trying Android for the very first time.
    Thanks in advance.
    Regards
    Darren

Maybe you are looking for

  • Restore previous backup (folder exist in C:/...backup) but not on the iTune list.

    There were problems with my iPhone for the past few days with freezing etc. So i backup the phone and brought it into Apple for an exchange for a new one. When i got home, when i plugged into iTune, there are no other options apart from ONLY set up a

  • Process Improvements in PI 7.0

    Dear Experts,     I  am in production support project in PI 7.0.I like to give some good process improvemnts for our area PI 7.0 to my customer.    I need your suggestions some good ideas such that it can leaverage the existing PI system(Production s

  • Issue with pages

    Hi Friends, I m facing problem with form printing in smartform when i m going to print next page which have some other than first page data which i mentioned as backpage for this i used command in footer. Now my requirement is suppose there is data o

  • Need to Activate field in FF68

    Dear Experts, We need to activate the field Bank account number(BNKNO_PRNO) in FF68. I have checked in Maintain screen varient OT45 also it is not allowing Add the field name. please Advice. Thanks in advance. Regards, Venkat

  • Current position in image resets upon switching between images

    I have Adobe Photoshop CS3 on Windows XP.  Here's what happens: I have multiple images open at once I'm zoomed in real close on a picture, say somewhere in the lower-right-hand corner of the image I switch to another image (ie, go to Window->[Other I