My ipod is not recognized by iTunes (but recognized by Windows)

Hi everyone,
I have bought a new ipod 30G 5th Generation. Initially, I have a 4G ipod and an itunes installed on my computer. I have updraged my itunes to v7 and pluged my new ipod 5G to my compuer. I can see the ipod on My Computer as a removable disk but iTunes don't recognize the ipod and don't have it on the Device list.
Since I'm on iTunes v7, I have run the diagnostic module and in the log file I have this:
Connected Device Information
MONIPOD (F:\), iPod with video running firmware version 1.2.1
Serial Number: 8N644RUDV9M
Bus Speed: 61440
The last connected iPod serial number: 4J527R2GTDS.
It seems that iTunes is recognizing that I had a previous ipod. Does anyone know if Itunes is not recognizing my new ipod because another ipod was already registered on my computer ?
Thank you.
Pavilion   Windows XP Pro  

See if anything here helps: iPod shows up in Windows but not in iTunes

Similar Messages

  • Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes  but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.

    Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes  but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.

    Did you try everything here:
    iOS: Device not recognized in iTunes for Windows
    Then try a different computer to help determine if yo have an IPod or computer problem.

  • New Nano 4Gb is not recognised by itunes but is by Windows XP

    I previously had a iPod Mini which recently failed so I have purchased a 4Gb Nano this week
    However when I connect it to my computer I can see it in explorer but not in iTunes (when I conect my girlfriends 2 Gb Nano to my computer it is recognised by both Windows and iTunes)
    In addition when ever I plug it in Windows starts up autoplay
    When I disconnect the Nano even safely the Nano resets itself and asks for the language I wish to use
    Any ideas on how to fix this or is it time to return this. I have trie hard resets when connected and not connected

    Hello,
    Have you seen this article about it?
    iPod doesn't appear in iTunes but does in Windows
    I would suggest doing a restore on your iPod (this will format your iPod to this computer).
    You won't be able to do that yet, since if you open up the iPod Updater, do you get a "iPod Service Error" or "can't mount iPod" (I presume you will get one of those messages)?
    See this link:
    iTunes/iPod Updater confuse iPod with network device, causing iPod to not mount or be recognized.
    Overall, in this situation, I suggest assigning your iPod a different drive letter, then try restoring it:
    Assigning your iPod a different drive letter (previous link)
    I hope this helps!
    -Kylene
    If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

  • TS4062 my iPhone does not appear in itunes but appears in windows

    my iphone does not appear in itunes but appears in windows, but not as Jordan's iPhone but as Apple iPhone

    This has been happening to alot of people since the latest update to iTunes for those that have windows 8 or 8.1

  • Ipod not recognized in itunes but is in windows

    okay, what should i do here, i followed all the steps in the article on this on the support site, i reinstalled, disabled conflicting processes, every step in that article about if my ipod is recognized by windows but not itunes, what should i do now??? cuz i'm baffled, my ipod is flashing do not disconnect, and has the spinning icon in the top left corner indicating that it is doing something, is there anything i should do to get it recognized in itunes?

    Hi, I kind of have a similar problem. I have two Ipods. One is an Ipod video and the other is a 4GB ipod nano. And i'm having problems with the nano. My girlfriend once disconnected while it was playing on itunes. Since then i haven't been able to get it to work. I've tried everything. Windows won't recognize it and neither does Itunes or the updater. When I open the updater it says initializing and it freezes. Itunes wont read it at all, and windows, well when i go to "safely remove hardware" it comes up there it says "Apple Ipod USB devie". I'm not sure if its recognizing it at all. But it wont disconnect it. The nano itself works fine! Well actually when she disconnected it the nano wouldn't turn off. Until i connected back to the computer and restored it. And thats when it wouldnt' come up on my PC. If anyone can please help me, or has had the same problem and worked around it, any advice will be greatly appreciated . . .thanks

  • My 6th Gen iPod nano is not recognised in iTunes, but is in windows.

    Up until this morning my ipod was working fine with iTunes. I updates iTunes this morning and then a message came up stating that iTunes knew there was a device but it couldnt access it or something along those lines. It said if this problem continued I should reinstall iTunes. I evenutally reinstalled iTunes, I also restarted my iPod and stopped and starting the services. I tried to delete the Temp file in Local, but it wouldn't let me. I have tried restarting my laptop, plugging the USB into a different port. Nothing seems to be working.
    Any suggestions on how to get it working again?

    Hey Sue13228,
    Good troubleshooting so far. I would also try out the steps in the following link:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Sincerely,
    Delgadoh

  • IPod classic is not recognised by itunes but is by windows - please help

    Hi there.... as title suggests my ipod as of today is refusing to be even recognized by itunes despite it being perfectly happy in my computer. I have tried every step that itunes support suggested with the end result meaning that it now has none of my music on it, so that went well.
    Just before it properly went down I would get something along the lines of Cannot sync - \"Required File Could Not Be Found\" Any ideas?

    Hi, I've been bothering with the same problem on the last two days, and also tried everything apple support had to offer, but to no effect.
    By accident and pure luck, I got out of this mess by the following steps (that will maybe help you):
    Go to "My Computer".
    Look out for the iPodClassic Drive.
    Open it.
    Open the folder "iPod_Control"
    Open the folder "iTunes"
    Look for "extras". It's the iTunes Data Source.
    Open it.
    There I was. iPod back in iTunes.
    Hope it will work out for you, too.
    Cheers.

  • Ipod nano not connecting to itunes but computer reads it

    i just got a new ipod nano and i downloaded itunes 7.0.2. the computer recognizes it because of ding it makes and the ipod itself acts like one should. it also shows up in "my computer", but it does not appear in itunes. i have followed numerous troubleshooting tips with no affect.
    please help!

    It's woorking!
    Ok, after some 40 hours trying to figure out what was wrong in my case, I think I might have found the problem. The newest ipod software (I think) requires USB 2.0. I have a Dell Dimension 2400 Desktop running Windows XP Pro SP2. There are several USB ports: 2 in the front and 4 in the back. One of the first things I did was go to the device manager and check whether I had USB 2.0. Indeed, there was a USB 2.0 Enhanced Host Controller. All the problems I encountered were the same whether I used the two ports on the front or the two lower ports on the back. I went to the store for the second time ready to turn in my ipod nano and try to get my money back, but they told me that my computer didn't have a USB 2.0 port and that was the reason I was having trouble. They made me buy a USB 2.0 PCI card and sent me home. Before I proceeded to install the card, I carefully revised my ports. That's when I realized I had a printer connected to another USB port, ánd because of that I didn't notice I had two extra USB ports that carried that funny symbol you will find on the USB ipod connector. I hadn't tried the ipod on the port the printer was connected to, neither on the one next to it. I hooked my ipod to the ipod-virgin port and it worked! Finally! itunes recognized my ipod and I was able to upload songs and all. I didn't realize that even if you have one or two 2.0 USB ports, the others aren't necessarily 2.0 (on the device manager there were other host controllers that were not "Enhanced"). I guess this is what happened. I can't come up with any other explanation.
      Windows XP Pro  

  • My ipod does not sync with itunes but still have the charging icon.

    My ipod 4th Gen does not sync with itunes. However, the charging icon is there. I even check in My Computer and there is no iPod icon there. So, my iPod charges when i connect it with the usb prot but does not sync. Help me!! 

    Start:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    or
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • IPod Touch not recognised by ITunes but my iPhone 4 works fine.

    I am currently not able to sync my ipod touch as it is not seen by iTunes when I connect it.
    I am using Windows 7 and the latest version of iTunes and have followed each of the steps listed at
    http://support.apple.com/kb/TS1495
    but still can't sync.
    I have listed several key bits of information which I hope someone can explain.
    1. My iPhone 4 sync's fine - same user account under windows, same usb cable.
    2. When i plug in the ipod touch it starts to charge and iTunes appears to hang. e.g hovering over the file menu doesn't highlight the options. If I wait roughly 3 mintues iTunes starts responding again (file menu's are activated) but still doesn't recognise the ipod touch.
    3. If I do this over and over again I 'sometimes' get iTunes to recognise the device but it presents the 'Restore from backup or restore to factory settings'. If I select restore from backup it then informs me the backup is corrupt. The randomness of getting to this stage has no consistent steps and i've been unable to get to this point over the past 3 days.
    4. I recently bought a movie from iTunes and get the message 'The movie could not be played' and since getting this message i've been unable to get iTunes to see the device.
    Any help greatly appreciated.

    I've finally managed to get the device recognised my Windows. The solution was to take my ipod touch round to my friends house who own's an apple mac. Plugged into the Mac itunes instantly see's the device and everything is back to normal.
    I can know get my Windows 7 machine to see the device in iTunes. The strange behaviour I see on Windows 7 box is, on plugging in the device iTunes hangs if I then unplug the device and reattach it (repeat this several times) eventually iTunes doesn't hang and sees the device.
    Not at elegant solution granted but hopefully this may help someone out. This is obviously a software bug (is it that I am also syncing my iPhone?) as I've ruled out all the hardware involved.

  • Ipod 160g does not appear in itunes but appear in windows only in disk mode

    my ipod 160 g does not appear in itune (disk mode or not) but it appears in windows as IPOD (F:) only when it's in disk mode. I tried reseting it by holding the menu and center button it stop but then it goes back to the apple logo screen and stay on untill the battery dies and nothing else happens how can I reset it to is factory settings?

    sorry, I published one in the ipod forum now

  • My iPod is not recognised in iTunes BUT I have tried to restore it!!

    Okay, at home and my iPod went dead so I plugged it into mates laptop at home to charge (didn't think this would hurt it cos I didn't touch his keyboard or press anything, just charged it!) Came to work tried to update iPod with new tunes and it said it did not recognise the iPod (the name I gave my iPod did not come up either) and told me to restore it. Clicked on restore - told me it would go back to factory settings and I would lose everything). I went ahead and restored it. No it just keeps telling me to restore it. My iPod just has the do not disconnect icon coming up and is empty - none of my songs or pictures are updating on my iPod. Please please can someone tell me how I make my iTunes recognise my iPod again and put all my songs back on!!! PLEASE!! I am lost without my iPod!!!! Thanks Lucie....xx
    iPod Video 30GB   Windows XP  

    I had the same thing happen. I hooked my iPod up to my notebook, which has iTunes and is set up for my daughter's iPod 30GB Video. I have the old clickwheel 20 GB. Mine is set up to use my desktop computer. I thought it would not harm it to just charge it on my notebook as long as the notebood was turned off. Then when connecting to desktop, I got the do not disconnect sign..I ended up rebooting the computer and ended up with the sad iPod face. I have reset so many times and cannot restore iPod. I have charged it numerous times with the wall outlet. When connected to the desktop, it just shows the Apple icon. I have reinstalled iTunes. Please let me know if you find an answer to this problem. Best of luck to us both.
    Anyone who can help us please do so.
    Thank you!
      Windows XP  

  • IPod Touch 3rd Generation not Recognized by iTunes but recognized by Windows as "Apple iPod"

    Exactly what the title says. My iTunes will not recognize my iPod touch, but my Windows Vista will recognize it with autoplay. I updated iTunes about 10 minutes ago, tried two different apple wires, and 3 different USB ports that work. Can anyone help me fing a solution? I found the iPod Touch assistant thing and tried all of those steps but the problem recurred. Thank you in advance!
    -Dylan

    I have the same problem. My Iphone 4s works fine when docked to PC. PC won't recognize my 3rd Gen Nano. Same goes for my Work PC. They don't recognize it nor will plugging it in to a PC charge it. I have to plug it into wall socket to charge.
    I have tried resetting, I have tried downloading newest Itunes.
    Must be the Nano itself if it doesn't get recognized by mutliple PCs?
    I haven't used the Nano for probably 2 months. Previously it worked fine...
    One thing, when docked to my laptop during a reboot/startup, it intially starts to charge the Nano, but once setup is finished it doesn't recognize it any longer...

  • 1st Gen iPod Nano not appearing in iTunes, but DOES appear as a disk

    Good Afternoon All,
    I have a 1st Gen Nano 1GB that up until iTunes 9 was syncing fine, but now - Nada.
    The Nano is in disk mode and appears just fine in Finder, I can eject it and it's charging fine but iTunes 9 won't see it.
    I have:
    - reset the iPod (not restored because it won't show up in iTunes)
    - updated iTunes to r9 and checked for any other outstanding updates
    - Re-installed iTunes 9
    - this morning I applied the 10.6.1 update
    - The update forced a reboot of the iMac so I have rebooted since the issue started
    I can't do most of what is in this KB article because it won't appear in iTunes (hard to restore otherwise, right?): http://support.apple.com/kb/TS1410
    My iPod Touch's (both 1Gen) connect to the same USB port/cable combination just fine and applied the 3.1 update to both through the same port/cable.
    I don't want to restore the Nano if I don't have to, I have some Nike+ run data on there I don't want to lose, but I suppose I can pull it off in disk mode first if I have to restore.
    Any help is greatly appreciated.

    Fortunately I solved my own problem, but unfortunately it took an iTunes downgrade.
    My daughter's iBook was getting dog slow so I decided to pull a "PC" and reload fresh Leopard to clear out the gunk and get her to trim the fat from her iTunes and other directories and clear the mung left over from the original Tiger to Leopard upgrade.
    As part of that I initially skipped the iTunes 9 update and connected the iPod to iTunes 8 - it was recognized instantly and uploaded my Nike+ data.
    I did notice that the Nano is still PC formatted from back in the day before I switched to Mac. I am going to try connecting it to my iTunes 9 iMac again, and if nothing comes up I am going to restore it in iTunes 8 to Mac format and then see what happens in iTunes 9.
    I will update here.

  • Ipod is not visible in itunes, but sincs with photos

    Help!!
    I have an apple macbook air, however I tried connecting my ipod touch, the macbook allows my photos to sic but itunes does not find my music.

    - Try another computer to help determine if you have an iPod or computer problem
    - Run diagnostices and see it that helps.
    iTunes for Windows: Gathering and using iTunes Diagnostics

Maybe you are looking for

  • Using a source file to test behaviors

    I am developing some special mail handling features, based on the message content and some library information that I have. I don't want to go to the trouble of setting up a POP3 server since I have the test data in flat files. Has anyone developed a

  • What's with the slow gets from my ResultSets?

    I have two databases, an Omnis and a MySQL. I'm trying to copy the data from the Omnis into the mysql, but the getXXX(int i) methods acting on my ResultSet are LUDICROUSLY slow... to transcribe a meager 2660 entires (with 15 columns) takes a staggeri

  • Problems with installing Oracle java or reinstalling Apple Java

    Hi all, I need Java for an online government course I'm taking. A 'technical test' available tells me that my java is out of date. I am directed by the course software to download Oracle Java for Mac, version 8u45. I'm running Mac OSX 10.7.5, but I s

  • Satellite U205-S5057 reformat error : BOOTMGR missing

    hi, I am trying to reformat the hard drive of my Satellite U205-S5057 using the Toshiba recovery disks. When i first booted with the recovery disk i chose the out-of-the-box factory default reformatting option. After it had finished erasing all the d

  • Adding a lineseries to an area chart

    Hi all, I was wondering if anyone knew of any issues adding a lineseries to an areachart in Flex 3? I have an areachart with an areaseries showing various data. I want to allow the user to add in a threshold in the form of a lineseries on the area ch