My Ipod is not recognized on windows 8. I just reinstalled Itunes on the computer, but nothing

My Ipod is not recognized on windows 8. I uninstalled I-tuns, and then reinstalled it, but still no Ipod shows up

Did you do everything here:
iOS: Device not recognized in iTunes for Windows
Including
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

Similar Messages

  • Ipod touch not recognized ny windows and wont connect to itune

    i have tried evreythang its the ipod i know it for shure it happend durung a restore and the itunes update plz help

    See if this link helps resolve your issue...
    http://support.apple.com/kb/HT1808
    If your Device has been modified, this will not necessarily work.

  • Ipod disabled & not recognized in windows 7 or itunes

    My son disabled his ipod touch 4th gen trying to get into it, he planned to give it to his cousin so I just removed the device from his Apple acnt. However, it's still disabled & now not recognized in Windows 7 or by I-Tunes on any computer or usb we try, but it does charge by usb or wall charger. I am not super familiar with Apple products & need some advice if anyone has any. Thanks!

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    Also try on another computer

  • My daughter forgot her password and now her ipod has locked her out and says disabled connect to itunes.  The computer which this ipod was synced has crashed.  How can I fix this?

    My daughter forgot her password and now her ipod has locked her out ir says disabled connect to itunes.  The computer she last synced to has crashed.  How can I unlock this ipod? 

    The device will have to be restored but without the last computer it was synced to, that's not a possibility.
    Take the iPod to an Apple store or Apple certified repair shop.
    You will need a computer in order to sync, restore, and update the iPod in the future.
    "If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it."
    From here:  iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

  • Everytime I try to launch the iTunes store I get a message that iTunes has stopped working and that windows is searchning for a solution to the problem, but nothing gets fixed

    everytime I try to launch the iTunes store I get a message that iTunes has stopped working and that windows is searchning for a solution to the problem, but nothing gets fixed

    Hello mcgivnma,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Best of luck,
    Mario

  • My iPod touch not recognized by Windows XP Serv.3?

    What can I do that my iPod touch is recognized by Windows XP Service Pack 3 ?

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • IPod touch is not recognized by Windows (with a connect to iTune screen) after OS 5.1.1 upgrade and received an 1602 error

    My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error.  My iPod is now having a connect to iTune screen.

    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    http://support.apple.com/kb/TS3694#error1602

  • IPod is not recognized in windows

    My iPod is not recognized in either Windows 7 or iTunes.  The iPod was jail breaked and that may have an impact.  I did a reset to remove all files and now all I can do with it is view the logo on the screen.  Help.

    Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
    Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

  • IPod Touch not recognized by Windows Explorer.

    My iPod Touch is shown in iTunes' list of devices but is not recognized by Windows Explorer.  Another possibly consequential symptom is that iTunes will not start when the device is connected to the computer.  Any help appreciated.
    Windows 7 Pro, IE9, have verified latest version of iTunes.

    If your iPod is recognized by iTunes (and by your photo app as a camera), then that's how it should be. To startup iTunes when the iPod is connected, check the appropriate option on the iPod's Summary page in iTunes.

  • Ipod touch not recognized by windows 7

    Hello,
    I know this is a commonly asked issue on these forums. So I will be as thorough as possible. I am using an ipod touch first gen running iOS 3.0. I am trying to sync it up to my computer which is running windows 7 profession service pack 1. I have followed the steps on the apple help guide and with apple device manager running automatically, I cannot get the device to work. I have reinstalled itunes and the ipod has a charge (for the time being). I was wondering if anyone had any more tips or tricks to get my ipod to be recognized? (My usb ports all work and if I plug it into my parents computer it is recognized there).

    The symptoms are a bit different, but since you've got an nVidia chipset and (presumably) at least 4 GB of RAM, I think the first thing to do is make sure you've applied the *Microsoft Host Controller Driver Update* available for you at your drivers and downloads page at HP:
    [HP Pavilion Elite e9120f Desktop PC > Microsoft Windows 7 (64-bit) > Software & Driver Downloads: Microsoft Host Controller Driver Update|http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv -78469-1&lc=en&dlc=en&cc=us&lang=en&os=4063&product=3970019]
    With that update in place, does the Touch behave a bit better when you plug her into the PC?

  • Iphone 3G not recognized in Windows XP or seen in iTunes

    I recently updated my itunes to iTunes 10. When I plug in my iphone 3g to the usb port, all that happens is that Windows recognizes and installs a camera device. The iphone is not being seen. iTunes also does not recognize the iphone under devises. I have uninstalled and reinstalled iTunes per the recommendations on the apple support website. To no avail. In the devices section in Windows, the iphone is not showing up. I have tried several usb ports on the computer and none of them show the iphone. When I took the phone to work and plugged it into the computer at work, Windows XP immediately recognized it and so did iTunes. At work, the iTunes is iTunes 9.
    I'm not sure what do to. Any suggestions?
    Thanks.

    If I had to take a wild guess it would be that you have a problem with the USB bus on your computer. Since you tried connecting the phone to another computer and it worked that would rule out the problem being on your computer. The only other idea I have is that if you didn't use the same dock cable on both computers that it could be the cable, but I would assume that you used the same cable both times. I would recommend checking to see if any other USB peripherals have problems connecting to your computer as well.

  • I need reinstall itunes in my computer, but error 7 (windows error 126)

    I need to reinstall itunes in my computer, because error 7 (windows error 126) appears, and I dont know how to do it.

    Refer this article to repair Microsoft.net Framework
    iTunes for Windows: "Error 7" message when opening iTunes
    http://support.apple.com/kb/TS3074

  • IPod Shuffle Not Recognized In Windows Or iTunes v7.0 - What Now?

    Hello everyone,
    I am having the same problem as many who have posted here. I have upgraded my software to iTunes v7.0.1.8. I also accepted the auto update for my iPod Shuffle - 512GB 1st Gen to v 1.44 (I believe). Of course, now my Shuffle is not recognized in iTunes and is only recognized in Windows for less than 5 seconds (as I have monitored it). I am listing below all of the actions I have taken today.
    As none of these have worked, my question is now what? Does anyone have any other suggestions before I take the dreaded step of calling support? Any help is appreciated.
    I am not happy with this upgrade issue at all. I expect much better from Apple.
    Steps Already Taken:
    1. Reset iPod.
    2. Set Terminal Services to "Manual" and restarted my laptop PC.
    3. Changed all USB Root Hub entries power management options to "Allow the computer to turn off this device to save power option" and rebooted.
    4. Assigned my external hard drive a different letter as it was assigned to "E" and tech support documentation suggested I changed it - I changed it to "M".
    5. I stopped the iPod Service via the Services and Application interface from My Computer/Manage, reattached the Shuffle, and started the iPod Service. The Shuffle was still not recognized.
    6. I uninstalled iTunes 7.0.1.8, the Apple Software update and QuickTime. I deleted all temp directories; program files folders and all possible traces of all three pieces of this software. I also deleted my iTunes library. I reinstalled all of this software and re-built my Library. NONE OF THIS WORKED!
    My 30GB Video iPod works fine and always has - it is only the shuffle for which I have this issue any only since the upgrade.
    What do I do now? If no one has another fix, I will be forced to call Tech Support after an experience with them over a year ago I would almost rather throw this thing away!

    qswh - I too cannot play the songs that are loaded on the shuffle. Additionally, I get a green & orange light when I plug it into a USB port and then I either get a blinking orange light or a solid orange light from there after.

  • IPod is not recognized by Windows, iTunes or Device Manager

    I'm running Windows XP with external hard drive. When hard drive is connected, iPod will not sync and I get message stating "USB Device Not Recognized. One of the USB devices had malfunctioned..."
    When disconnect, iPod will sync. However, iTunes is on external drive; therefore musc is not syncing onto iPod. I've attempted the 5 R's as well as searching for iPod in Device Mananger. When iPod is conncected, it is listed in Devce Manage as "Unknown Device." Articles to solve recommend relettering device, bu how do I get it to be recognized by Device Manager?

    I HAVE A SIMILAR PROBLEM TO THAT I JUST BOUGHT MY 30GB IPOD VIDEO ABOUT 4 HOURS AGO, SINCE THEN I HAVE BEEN REALLY STRUGGLING TO INSTALL IT. A SOON AS I GOT IT, I DID EXACTLY WHAT IT SAID, I WENT TO WWW.APPLE.COM/IPOD/START AND DOWNLOADED THE NEWEST ITUNES VERSION. THEN I PLUGGED IN MY IPOD TO MY COMPUTER, AND ALL THAT HAPPENS IS A LITTLE BUBBLE OPENS UP AND SAYS "FOUND NEW HARDWARE" WHEN I CLICK THAT, IT OPENS UP, AND I CLICK "INSTALL THE SOFTWARE AUTOMATICALLY" WHERE IT SAYS IT, THEN I CLICK NEXT AND WAIT. AFTER, IT SAYS "THE HARDWARE WAS NOT INSTALLED BECAUSE THE WIZARD CANNOT FIND THE NECESARRY SOFTWARE".AFTER I WENT TO WWW.APPLE.COM TO FIND OUT WHAT THE PROBLEM WAS, I'VE LOOKED THROUGH AND READ EVERY ARTICLE THAT CAN PERTAIN TO MY SITUTAION, BUT NONE HAVE HELPED ME I AM DISPLEASED TO SAY, THE LAST ARTICLE I READ WAS THIS ONE:
    http://docs.info.apple.com/article.html?artnum=305136
    BUT EVEN THAT DOES NOT HELP ME BECAUSE WHEN I GET TO STEP 8 WHICH SAYS "Locate the iPod in this list. In some cases one of the entries will have "iPod" in its name. If no such entries are present, the iPod is most likely represented by "USB Mass Storage Device." I LOOK FOR WHERE IT SAYS "IPOD" OR "USB MASS STORAGE DEVICE" UNDER "UNIVERSAL SERIAL BUS CONTROLLERS, AND CANNOT FIND EITHER THING..I HAVE RESTARTED MY COMPUTER A NUMBER OF TIMES, I HAVE EVEN UNISTALLED ITUNES THEN REINSTALLED IT I HAVE STRETCHED EVERY OPTION AND NOTHING HAS WORKED..CAN SOME ONE PLEASE HELP ME??..I HAVE BEEN TRYING TO SOLVE THIS PROBLEM FOR 4 HOURS STRAIGHT STOPPING ONLY TO GO TO THE BATHROOM AND GRAB A BITE TO EAT..

  • Can anyone help? My 30GB iPod is not recognized by windows.

    "USB Device Not Recognized" is the error report I get each time I connect my iPod to my USB port. I tested my USB ports with other devices and they worked normally. Has anyone had similar issues? Can anything be done without sending my iPod in for repairs? Any advice shall be appreciated.
    Sam.
    Alienware Laptop   Windows XP Pro  

    I'm having the same issue! Our IT department thinks it's an iPod driver issue, but I've just installed the latest updater, so it wouldn't "appear" that it would ne that.
    Help II!
    hello every body, i bought my ipod secondhand (20 Go
    version 2.3), without the installation CD, so when i
    connected it to windows xp, it's not recognized, i
    installed the last version of itune and ipod driver
    on my PC, but the problem persist always, what can i
    do? is there another software to install, because i
    think that the driver that i installed is useful to
    upgrade the ipod, and not to make this one recognized
    by windows, i don't know!!!!!
    I'm having the same issue! Our IT department thinks it's an iPod driver issue, but I've just installed the latest updater, so it wouldn't "appear" that it would ne that.
    Help II!

Maybe you are looking for

  • Portal objects are not seen in portal contant

    HI gurus When I go to contant Administraction-->Portal contant ,I just see the no portal objects appears.its shows that the objects are required. I already deployed ESS and MSS Business Packages with SDM but I can't see the content in the Portal Cont

  • Populating the bapi in retreiving the pricing condition

    Hi guys, given the ff data, how am i going to populate bapi_salesorder_simulate to retrieve the pricing condition? Condition      Table     Field                    SAP Field ABCD     907     Sales Org                   LIKP-VKORG ABCD     907     Cu

  • Populating ADF Table from Multi-Dimensional Array

    Hello! I'm trying to populate an ADF table from a multi-dimensional array. Let's say that my array is String [] [] myArr = new String [3][5]. On my page backing bean, I have a private attribute called tmpArr like this... String [] [] tmpArr; ...which

  • File and programme locations

    I recently (well yesterday actually) installed an additional 1TB internal drive in my G5 giving me 1.5Tb in total. My question is related to how to split the folders etc. The intention was to have all data on the large drive and programmes/utilities

  • Dump in UM4_UPDATE_WORKLIST MESSAGE_TYPE_X in Method GET_SETTINGS

    Hi all, I'm stuck in an unicode preparation, I get a dump at update Worklist in method GET_SETTINGS of Main program Termination occurred in the ABAP program "CL_UMG_UTILITIES==============CP" -   in "GET_SETTINGS". The main program was "UM4_UPDATE_WO