My ipod is not seen under portables in winamp....
I DONT USE ITUNES BECAUSE IT DOES NOT OPEN ON MY PC....does anyone know how i can solve this issue???
The iPod will not work with Winamp without the use of a plug in.
http://forevergeek.com/opensource/using_your_ipod_withwinamp.php
Similar Messages
-
While updating ipod touch we now have a blank screen. I have updated itunes but am unable to sync because the ipod does not show under devices. I have tried shuttng down and restarting but only have a blank screen or ap0ple logo. Sometimes the screen shows connect to itunes but that has been it.
I have the same problem, after upgrading my itouch to iOS6, it doesNOT respond to anything, apple logo stays on the screen all the time and does NOTHING! restore does not work either.... i hope we can get an answer from someone soon... apple support did not have an asnwer.
-
Ipod classic not seen in itunes on computer
ipod classic not seen in itunes on computer
I bought an second hand Ipod classic 160gb. How can i remove the music on it and put my own music on it. So the Ipod is not found in Itunes.
-
Ipod touch not seen in sauce menu of itunes
Ipod touch not seen in sauce menu of itunes, I have turned off & on the Ipod and re-downloaded a fresh ITunes software & used a different usb port & restarted the pc but still it is not seeing the IPod Touch. I also got this message when downloading a fresh ITunes software "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services"
See here:
How to restart the Apple Mobile Device Service (AMDS) on Windows
Also maybe here:
iPhone - not enough access privileges: Apple Support Communities -
Older ipod will not work under itunes11
My older ipods will not work under itunes 11, Who can help?
i think at this point we are unsure if the problem is that apple has once again decided to leave something older in the dust (as they've been doing a LOT lately) or that you've found a bug in itunes 11 that will be addressed at a later date. just how old are these ipods? if they were mine and i had to choose between itunes 11 and my ipods i would choose my ipods. right now i would look around the itunes forums and see if anyone else has this problem.
-
I have a strange problem connecting my iPod shuffle. If I plug it into the keyboard USB hub, iTunes recognizes it and I am able to load it with music, but if I plug it into the USB ports on the rear of the G4 it is not seen at all on the Bus (System profiler shows nothing connected to that USB bus) but it will charge up.
Very strange! Does anyone have any idea how to resolve this because where the computer is sited, the USB ports are not very accessible!
I have tried resetting the shuffle and reloading the software to no avail.
Many thanks
SimonActually, it doesn't sound like the same problem at all.
When you have the shuffle plugged into a USB port, it isn't the shuffle that's 'playing all day' - iTunes, on the computer, is playing the playlist of songs, copies of which are on the shuffle.
What's the charge status of your shuffle's battery?
srb -
[Solved] External USB 3.0 drive not seen under /dev/sd*
Ok, thought this would be easy but for some reason I cant get arch to see the physical drive. Its a new Seagate 2TB external USB 3.0 drive. I connected it to a windows laptop and it was quickly recognized (ntfs). I then installed ntfs-3g but still cant see it. I then formatted it under windows as ext4, but its still not seen. I tried this with 2 arch PC's, both the same issue. I seen a few other posts and tried a few things like making sure the mod xhci_hcd was running. I have the latest updates on each system. fdisk -l does not show the device at all! I can see and boot to other USB devices fine just not this one, maybe since its USB3.0??
I noticed here, they talk about maybe USB3 is broke in the new kernels, after 3.10.2 maybe?
Similar issue: https://bbs.archlinux.org/viewtopic.php?id=126299
Possible bug: https://bugs.archlinux.org/task/36296
However, I would think that by now, this would have been fixed as USB3.0 is more common? Other than trying to find a OLD 3.10.2 kernel any other advice?
dmesg:
[47653.187708] usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
[48258.419876] r8169 0000:02:00.0 enp2s0: link down
[48435.623148] usb 6-1: USB disconnect, device number 2
[48697.691980] usb 6-1: new SuperSpeed USB device number 3 using xhci_hcd
[48938.171094] usb 6-1: USB disconnect, device number 3
[48975.057438] r8169 0000:02:00.0 enp2s0: link up
uname -a
Linux 3.15.7-1-ARCH #1 SMP PREEMPT Mon Jul 28 20:06:17 CEST 2014 x86_64 GNU/Linux
lsusb: (Seagate USB)
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 003: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver
Bus 007 Device 002: ID 046d:082d Logitech, Inc. HD Pro Webcam C920
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 004: ID 0bc2:ab20 Seagate RSS LLC
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 002: ID 05af:8366 Jing-Mold Enterprise Co., Ltd
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 013 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 012 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsmod:
Module Size Used by
uvcvideo 74983 0
videobuf2_vmalloc 3368 1 uvcvideo
videobuf2_memops 2239 1 videobuf2_vmalloc
videobuf2_core 30407 1 uvcvideo
snd_usb_audio 131860 0
videodev 123032 2 uvcvideo,videobuf2_core
snd_usbmidi_lib 21428 1 snd_usb_audio
snd_rawmidi 20278 1 snd_usbmidi_lib
media 12611 2 uvcvideo,videodev
snd_seq_device 5244 1 snd_rawmidi
mousedev 10912 0
evdev 11784 8
mac_hid 3273 0
kvm_amd 52987 0
kvm 408583 1 kvm_amd
microcode 17157 0
serio_raw 5073 0
pcspkr 2059 0
k10temp 3242 0
snd_hda_codec_realtek 54803 1
r8169 59191 0
snd_hda_codec_generic 56366 1 snd_hda_codec_realtek
mii 4251 1 r8169
shpchp 25706 0
snd_hda_codec_hdmi 40396 1
radeon 1361721 21
snd_hda_intel 22831 1
snd_hda_controller 22975 1 snd_hda_intel
snd_hda_codec 104665 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
ttm 67215 1 radeon
snd_hwdep 6652 2 snd_usb_audio,snd_hda_codec
snd_pcm 83207 5 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 19294 1 snd_pcm
drm_kms_helper 39643 1 radeon
snd 61276 14 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
tpm_infineon 7786 0
tpm_tis 9310 0
soundcore 5551 2 snd,snd_hda_codec
tpm 23363 2 tpm_tis,tpm_infineon
hwmon 3346 2 k10temp,radeon
i2c_algo_bit 5480 1 radeon
i2c_piix4 10801 0
button 4765 0
processor 25153 0
vboxvideo 2029 0
drm 244846 25 ttm,drm_kms_helper,radeon,vboxvideo
i2c_core 41648 6 drm,i2c_piix4,drm_kms_helper,i2c_algo_bit,radeon,videodev
pci_stub 1381 1
vboxpci 15059 0
vboxnetflt 17700 0
vboxnetadp 18547 0
vboxdrv 345858 3 vboxnetadp,vboxnetflt,vboxpci
ext4 494420 3
crc16 1359 1 ext4
mbcache 9155 1 ext4
jbd2 82948 1 ext4
sd_mod 37554 4
sr_mod 15026 0
crc_t10dif 1135 1 sd_mod
cdrom 35191 1 sr_mod
crct10dif_common 1436 1 crc_t10dif
ata_generic 3434 0
pata_acpi 3579 0
hid_generic 1217 0
usbhid 41250 0
hid 93052 2 hid_generic,usbhid
atkbd 17006 0
libps2 4571 1 atkbd
i8042 13666 1 libps2
serio 11018 4 serio_raw,atkbd,i8042
pata_atiixp 5163 0
ohci_pci 4192 0
ehci_pci 4152 0
ohci_hcd 35606 1 ohci_pci
ehci_hcd 64619 1 ehci_pci
ahci 24299 3
libahci 21772 1 ahci
xhci_hcd 149286 0
libata 174089 5 ahci,pata_acpi,libahci,ata_generic,pata_atiixp
usbcore 188509 9 snd_usb_audio,uvcvideo,ohci_hcd,ohci_pci,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,xhci_hcd
scsi_mod 138333 3 libata,sd_mod,sr_mod
usb_common 1712 1 usbcore
Last edited by banshee28 (2014-08-05 02:27:01)R00KIE wrote:
Make sure you haven't blacklisted the uas driver. If the uas driver does not work well for you, check here [1] how to disable it for a particular drive.
[1] https://bbs.archlinux.org/viewtopic.php?id=183190
Awesome, THANKS!! Yes I got it to work following this and specifically Da_Coynul's post:
I was able to get my external drive working again by telling the usb-storage module to ignore uas for the device. Here is how to do it:
First, create a file named ignore_uas.conf in the /etc/modprobe.d directory containing the following*:
options usb-storage quirks=Vendor_ID:Product_ID:u
*(substitute your actual Vendor_ID and Product_ID obtained from the lsusb -v command).
Next, regenerate your inital ramdisk:
# mkinitcpio -p linux
Finally, reboot your computer.
Although this is not a solution to broken uas, at least it will let you use your drive as before hmm
https://bbs.archlinux.org/viewtopic.php … 2#p1428782
Thanks everyone...Now I can see the drive, and will work on formatting it with XFS... -
Package not seen under user sys!
hello;
I view packages under sys user;
but not our package seen under sys; I create it with user sys
any idea
regrads
siyavus11g R1
11.1.0.7
create or replace procedure SYS.mailserver_acl(
aacl varchar2,
acomment varchar2,
aprincipal varchar2,
aisgrant boolean,
aprivilege varchar2,
aserver varchar2,
aport number)
is
begin
DBMS_NETWORK_ACL_ADMIN.DROP_ACL(aacl);
dbms_output.put_line(‘ACL dropped…..’);
exception
when others then
dbms_output.put_line(‘Error dropping ACL: ‘||aacl);
dbms_output.put_line(sqlerrm);
end;
begin
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL(aacl,acomment,aprincipal,aisgrant,aprivilege);
dbms_output.put_line(‘ACL created…..’);
exception
when others then
dbms_output.put_line(‘Error creating ACL: ‘||aacl);
dbms_output.put_line(sqlerrm);
end;
begin
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL(aacl,aserver,aport);
dbms_output.put_line(‘ACL assigned…..’);
exception
when others then
dbms_output.put_line(‘Error assigning ACL: ‘||aacl);
dbms_output.put_line(sqlerrm);
end;
commit;
dbms_output.put_line(‘ACL commited…..’);
end;
Edited by: sak on Jul 1, 2010 4:36 PM -
My 5th Generation iPod will not sync under Windows Vista
Wow.. I finally got registered on this forum, took ages lol.
Well I've got the latest version of the iTunes software and I'm using Windows Vista Home Premium.
When I connect my iPod, it detects ok and then iTunes starts to sync it.. after about five seconds or so I get an error stating I do not have sufficient privelages to update the "My Music" folder, and thus my iPod will not update. Immediately after this error I check device manager, and a "USB Mass Storage Device" is detected with an error state (a yellow exclamation mark next to it). I can delete this from device manager, re-connect my iPod and it will do exactly the same all over again.
Can anyone help?I've had it working in the past, thats what is odd.
It just refuses to update saying I don't have the necessary privelages.
Not sure when the next version of iTunes will be released, hope its soon. -
Ipod classis not seen on source list.Unable to add playlist.
Hello,
I am trying to connect my old Ipod classic on to a Mac book pro.I see the ipod showing up on the desktop.When I open Itunes I am unable to viiew it on the source list so I could drag /drop playlists onto it.Can anyone help on this issue?
Thanks.Hi Ministrel,
Thanks for visiting Apple Support Communities.
Start with the troubleshooting tips in this article if your iPod is not recognized by iTunes:
iPod not appearing in iTunes
http://support.apple.com/kb/ts3716
Best Regards,
Jeremy -
IPod Touch not seen by PowerMac G4 running 10.4.11
My iPod shows no acknowledgment of being connected nor does my mac. help please
You won't see an iPod Touch in the Finder (like older iPods), only in iTunes (under devices in the left sidebar). Be sure you are using a USB 2.0 port.
You might need to remove and reinstall the Apple Mobile Device Service. Check out this article:
http://support.apple.com/kb/HT1747 -
When attempting to connect my IPOD touch to Itunes I get the message: IPOD cannot be used because the Apple Mobile Device service is not started. Also, the IPOD is not shown as a device.
http://support.apple.com/kb/TS1567
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
Ipod nano not seen in finder or itunes
ipod seen in disc utility only, but can't mount. have updated all software, reset and restored, plugged usb into port on computer's back, have chronic flashing do not disconnect on screen, have repaired disc permissions, have reviewed 4 pages of topics. any help appreciated. os 10.3.9
powermac g4 Mac OS X (10.3.9)Hello there, Hermione.
The following Knowledge Base article provides great, in-depth troubleshooting steps for the issue you're describing:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Ipod touch not seen in Itunes on windows 7
My Ipod touch has stopped working. I had a new laptop with vista that i upgraded to windows 7. I can see the ipod (as disk storage) on my computer but when i plug in to USB it bleeps but does not lauch or itunes or become visible if itunes already loaded. I have gone through all apple stuff for clean uninstall of every thing and i upgraded to latest version itunes. I went apple store..not very helpful..said my ipod syncs with a mac but cant do anything because they think it is windows 7! Any ideas, its driving me nuts.
StuartRighty-ho.
Here's the theory.
AMDS (which we need for Touch recognition) installs the usbaapl.sys and netaapl.sys drivers on a PC. As well as in the Program files, files for those drivers go into some other locations on a PC. Usually, when AMDS is uninstalled, those files and folders get uninstalled. (I just confirmed that yesterday on my XP SP3 box.) But it is possible for some of those files and folders to get stuck and not be removed by an uninstall. (Confirmed that yesterday on a different XP SP3 box.)
I've confirmed that the leftover files/folders can cause trouble with AMDS reinstalls (they are the source of some "rolling back installation" messages during AMDS installs). But I reckon they might also plausibly cause some grief in iPod/iPhone recognition contexts too. That's what we're going to follow up on with you, Stu.
let's start working on that.
First, we'd better try to track down where the little beggars live on a Windows 7 system. We're going to have to do some settings changes on the PC in order to even see them.
From the Start menu, click Open.
In the Organize menu, click Folder and Search Options.
Click the View tab.
In the "Advanced settings" pane under "Hidden files and folders" make sure that:
The "Show hidden files and folders" option is selected
The "Hide extensions for known filetypes" box is unchecked
The "Hide protected operating system files (Recommended)" box is unchecked
Click OK.
Now we're going to run a search for usbaapl ... I don't have a Windows 7 box available for reference, but this is how I'd do it in Vista.
I go "Start > Computer" and type usbaapl in the Search box. When it tells me it can't find it, I click Advanced, select the "search hidden, non-indexed and system files (may be slow)" box, and then wait for an eternity until the green progress bar up on the top of the "Computer" window has completely disappeared.
What files and folders with usbaapl in the name do you see show up in your search results, and what are their file locations?
Now repeat the search, this time for netaapl. What files and folders with netaapl in the name do you see show up in your search results, and what are their file locations? -
HT1923 my ipod is not seen by itunes
My ipod touch is not being seen by itunes when i connect it to my laptop. It was fine a couple fo weeks ago. I have uninstalled and reinstalled but it still wont do anything
Hello Snowflake1980,
Go through the section 5. Verify that the Apple Mobile Device USB Driver is installed from the link below
http://support.apple.com/kb/ts1538
Maybe you are looking for
-
Links not loading in Firefox when you select them in the body of the email
-
Problems importing footage with Canon GL-2
I'm brand new to Mac & FCP, migrating from Casablanca after 8+ years. I've had no luck using the "Capture Batch" option, so I've reverted to "Capture Now"...after reading lots of issues with the gl2. "Capture Now", though very time consuming, seems t
-
Routine in Infopackage not working
Hi all.. I wrote a routine in Infopackage with the selection Abap routine 6. for some reason the code is not selecting..i mean if the code has to get fisc year 2007, instead its getting all the records from all the years. i tested out the code in aba
-
Maintain excise contion types with basic price in SO
Hello experts , I have total 5 pricing procedures for a 30023 customer -- one is general pricing procedure ZPRI01where basic price pr00 and other condition types for discounts and surcharges are maintained. i also have 4 pricing procedures for excis
-
Generic data source for muliple level BOM
Hi Bhanu & everyone, Whats the best way to create a gereic data source for muliple level BOM (STKO, STPO & MAST tables) in BW? I also need to maintain the history. Thanks, Aniruh.