My iPod is stuck in recovery mode with a error code 1

my ipod is stuck in recovery mode with a error code 1

ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- Also, confirm your security software and settings are allowing communication between your device and update servers.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
  Apple Retail Store - Genius Bar     

Similar Messages

  • Ipod touch is stuck in recovery mode with a error code 9

    my ipod touch is stuck in recovery mode and when i try to restore it getting an error code 9

    Error 9: This error occurs when the device unexpectedly drops off the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    From:
    http://support.apple.com/kb/TS3694

  • My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

    My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

    Hi,
    You could see if this helps...
    DFU Mode / Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    DFU Mode
    Open iTunes and Connect the iPod to your Mac
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
    After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
    The Phone Screen will remain Black... Now Restore.
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • Phone stuck in Recovery Mode - cannot restore (error code 9)

    Help. I tried to update my iPhone to the latest software and instead of doing this it has now gone in to Recovery Mode (with the yellow triangle and the message to connect to iTunes). When I reconnect it to iTunes it tells me that I have to restore the phone. iTunes then tries to do this but it is unable to complete, Stating "An unkown error occurred (9)."
    Any ideas on how to bring my phone back to life?
    Message was edited by: Tom Lovering1

    I had the same thing happen. After reinstalling itunes and trying lots of things with Applecare over the phone, they put in a repair order and are sending me the packaging to send it in with. The computer could see the phone, but the phone didn't recognize that it was connected to Itunes.

  • TS3694 i have a iphone 3g which is recovery mode with a error code 1015

    Hi, I have my old iphone 3g whch was originally on the O2 network. I have a new iphone now, but I want to restore my old iphone 3G for my ypung son to use, however, when I try to restore to the original factory setting it comes up with an error code of 1015. Please can you help or advice me on how to rectify this?

    Are you trying to downgrade iOS on your iPhone or did you previously jailbreak it?
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    http://support.apple.com/kb/TS3694#error1015

  • Iphone 5 stuck in recovery mode with an error 2001

    My iPhone 5 is stuck in the recovery mode.  I have tried linking it up to iTunes by pressing the home key etc and managed to link it up but after resetting it to factory settings as asked and it removing software etc, it  just comes up with the error 2001. Please help!
    It has not been dropped, near liquids or anything like that.
    It just started doing it one day after putting it on charge.  It felt really hot when it was fully charged. Anyone have any ideas how to fix this?

    Thanks for the help Lawrence.  I have tried that already but still not working.  Tried different USB port and cables and different computers.  No luck so far
    so annoying...

  • HT1414 iphone stuck in recovery mode cant restore error cod 2001

    My phone is not able to turn on and when i plug it in on a charger it just says plug into i tunes. When i plug it into i tunes it says its in recovery mode and its going to restore then my phone just restarts and it says unable to restore Error code is 2001 Anybody know whats wrong????

    Hi Matt,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694#error2001
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    Hope this information helps ...
    - Judy

  • Iphone 4 is stuck in recovery mode and gives error code 2001 when trying to restore from itunes...any help?

    Just downloaded the new software from itunes today for my iphone 4.  While talking on the phone while plugged into macbook (charging) my call was dropped and then my phone turned off.  Itunes now says it found my phone and it was in recovery mode and I need to restore it.  When I try to do that I get an error code of (2001) and I am unable to go any further.  any help from anyone please?  Thanks.  Ben

    Thats okay
    Are you using a Mac or PC? The step about ports, it not really relative to your issue (error 2001)
    Apple wrote (in TS1275)
    (2001, 2002, 2005, 2006, 2009, and so on) If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. Learn how to reset the SMC. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue continues, it may be related to conflicting security software.
    So I would try an SMC reset if you are on a Mac. But mainly, try a different USB cable if you have one.

  • 4s stuck in recovery mode with error 29

    The problems started when I changed the battery, now phone is stuck in recovery mode with an error code 29. Ive turned the firewall off and anti virus on my norton security, switched the computer on and off and tried to restore the phone about 6 times now. Has anyone any other ideas please?

    That's a hardware problem, most likely cause when you broke something in the process of changing the battery.
    http://support.apple.com/kb/ts3694#10
    Find a competent 3rd party repair shop or buy a new phone. Apple won't touch that one now that you've opened it.

  • My iPod touch 4th gen is stuck in recovery mode with a broken 'lock' button.

    My iPod touch 4th generation is stuck in recovery mode with a black screen and I can't get it out. It has a broken lock button and I have tried everything to get it out of recovery mode. Every time I plug it into iTunes, it recognises my iPod and says 'iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used in iTunes, so I have restored it several times and every time, it says there is an unknown error. Please Help!! (my iPod is IOS 6.0.1)

    What is the complete wording of the error message that says unknown error? Usually more information like a error number is also given.

  • IPod stuck in recovery mode with home button not working

    Hi, I was restoring my iPod and everything went fine until it was restarting with the apple logo and loading symbol. My iPod's home button hasn't been working in a while so I use assistive touch. Now the iPod is stuck in recovery mode and I can't press the home button, I don't know what to do. Pls help!

    Try:                                               
    - iOS: Not responding or does not turn on           
    Whenit says place the iPod in recoivery mode:
    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:       
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Ipod touch stuck in recovery mode and will not restore. error code 3194

    ipod touch stuck in recovery mode, will not restore and comes up with error code 3194, itunes is up to date, please help

    Hi @rchangel - Thanks for the ideas...
    Yes - it won't let you install the 32 bit version on a 64 bit machine.
    I've had a cursory look at the SP1 release notes, and couldn't spot anything vital - what critical stuff do you know of in SP1?
    I don't want to have to go through all the pain of setting up VM's, reinstalling iTunes, getting all my album art back in etc. (though I could, as I do have Win7 pro). I've also heard that running iTunes in Windows 7 compatibility mode might help. Can anyone confirm whether that actually works?
    I think it's in Apple's gift to fix this issue, given that they say that they support Windows 7. So far I've had no feedback from a mail I sent to Apple, and the number of users reporting this problem keeps going up and up.
    I want Apple to recognise that there is a problem, and then I want them to fix it.

  • TS1538 Ipod is stuck in recovery mode, and not recognized by iTunes. Tried all of the recommended resets and combinations mentioned, but the ipod is still not recognized.  Genius said it may be a hardware error, but all of the buttons and cords work. Now

    iPod is stuck in recovery mode, and not recognized by iTunes.
    Tried all of the recommended resets and combinations mentioned, but the ipod is still not recognized.  Genius at apple said it may be a hardware error, "The button is broke" but all of the buttons and cords work and i proved it to him. He then said he doesnt know, ma Now what?

    If it does not work on other computers then I agree with the Genius

  • HT4623 my ipod is stuck in recovery mode?How do I repair

    M ipod is stuck in recovery mode after update, how can i repair without losing my info

    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • IPod Touch stuck in recovery mode and not detected in iTunes

    I was trying to update my iPod Touch (currently 3.1.3), so I downloaded the 4.3.3 firmware (I didn't want to download the 4.3.5) and connected my iPod to my computer, opened iTunes and hit Shift+Restore. Then, I chose the 4.3.3 firmware and proceeded with the restore.
    However, the following appears:
    Error 1602
    I pressed OK and the restore process stopped. But, my iPod is stuck in recovery mode. Every time I reboot it, the recovery mode shows up. It's also not detected in iTunes although my computer recognize it as iPod Touch Recovery Mode.
    Please help me solve this. I can't use my iPod.

    Error 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Above from:
    http://support.apple.com/kb/TS3694
    Also, when updating/restoring an iDevice, iTunes contactact the Apple sever to verify that you have the latest iOS version.  If not, it will not allow an install if an earlier version.

Maybe you are looking for

  • Jsp 1.2 tags in weblogic 5.1?

    Is there any patch to get JSP 1.2 tags to work in weblogic 5.1? I'm           itching to play with the new standardized tag library under           development thats been released on the Sun site. Unfortunately my           company is using weblogic

  • Regarding Item renderer issue in Grid

    Hi All, We are using custom MXML based itemrender in Grid when drag and drop property has been enabled "Null object reference error is raised from Itemrender" during drap/drop event.Please give a solution on this issue. regards, karthik

  • Query regarding Order of the column in a table

    We have a table called EMP in several of our schemas. JOB is the third column in order. But in some schemas, JOB is not the third column. How can i find the schemas with EMP table where JOB column is not the third column? SQL > desc emp Name         

  • Sqlplus determining Enterprise or Standard Editions.

    Hello. Is there anyway from sqlplus to tell if you are using on a enterprise server or standard server? select * from v$instance doesn't suggest anything. Message was edited by: user554561

  • How to View Photos with Music

    A friend has Apple TV and has downloaded his pictures and music to his Apple TV. He does a slide show, with music. Both random. The pictures show a a random collection of multiple photos on the screen at one time. They apparently might not even each