My iPod is stuck on the main screen saying that there was an error in iCloud backup. How do I fix it?

So when I went on today, my iPod said that it had a problem with iCloud. So, I hit ignore. Nothing happened. I tried a million times, but no luck still. How can I fix this?!

iCloud: Troubleshooting creating backups
Then as necessary:
- iOS: Not responding or does not turn on           
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable                                                       
- Try on another computer                                                       
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar                                     

Similar Messages

  • My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

    My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

    If you do not find a solution in the iPod nano (6th generation) - User Guide, suggest that you call AppleCare if still under warranty or take a trip to your local Apple Store or AASP.

  • I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting".  How do I fix it so that it'll burn?

    I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting".  How do I fix it so that it'll burn?

    Hi
    Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
    So first - turn on TV-Safe area and move any object well inside of this.
    Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
    Now my long long list on Multiplex Error
    LONG LONG LONG LIST
    Multiplexing Error
    PART One.
    Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
    I only use.
    Video - StreamingDV (miniDV tape via FireWire) and
    Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
    Photo - .jpg (.bmp known problematic)
    Chapters !
    A.    Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
    as described by Donnyboy69.  Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
    B.    Location of Chapters
    • Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
    • Not in a transition (or within 2-3 seconds from it)
    Important when from iMovie HD6 or previous - Now also observed when using FCE 4
    PART Two.
    from Robert Modero.
    "Multiplexing Error. Problem during initialization of tracks"
    Simply remember to add subtitles to your Quicktime files and menu buttons.
    Once I did that, I was back in business.
    from Boise Jim
    Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    I always makes a DiskImage first and test this so that it runs OK
    I use only - Verbatim DVDs
    I use only - DVD-R
    I burn at an as slow speed possibly e.g. x1
    This gives good DVDs
    PART Three.
    Multiplex Error
    Chuck, Chicago 2/7/2009.
    Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
    2. Disconnect any other external devices not absolutely needed.
    e.g. external USB/USB2 hard disks, other FW hard disks etc.
    3 Chapter marks in transitions - minimum 2 sec from
    FROM Bev.
    (Not a 'guy' but I will answer!)
    First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
    Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
    Also, choose a slower burn speed, 4x or less.
    Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
    From. Boise, Idaho
    I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    It worked, and I got a clean burn from iDVD.
    Hopefully this can help other people.
    by dheb0422
    Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
    One user more writes
    To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
    Video from both passed from FCE 4.01 with chapters
    One project worked fine in creating disk image file
    The other gave Multiplex Errors
    I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
    Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
    Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
    This time multiplex errors gone
    So had something to do with chapters
    So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
    After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
    That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
    When I removed "bad" chapter mark (and others in), no multiplex error
    As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
    I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
    Rich839
    In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
    Russ One - suggest this
    Multiplex Error-There was an error during muxing preparation
    One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
    Summary - What to try
    1. Chapters
    • Only A to Z and 0 to 9 in chapter title
    • No Chapter mark at very beginning of movie
    • No Chapter mark in or within 2 seconds from any transition in movie
    2. TV-safe area for buttons (no one outside this)
    3. Safe re-boot
    4. No other external devices connected - that are not needed
    SDMacuser adds to this
    • On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
    Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
    5. Minimum of 25Gb free space on Start-up hard disk
    6. Make a DiskImage first - reduces where problem originates
    7. Trash iDVD pref. file
    8. Make a new iDVD project
    9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
    10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
    Yours Bengt W

  • HT202159 I tried several times to download  pages that I already pay for and it says that there was an error in the installation , what can I do

    I tried several times to download  pages that I already pay for and it says that there was an error in the installation , what can I do

    -  Temporarily disable anti virus software if installed.
    -  Apps such as Little Snitch, Net Nanny, and Hands Off can prevent apps from downloading.
    -  Third party download managers can cause problems when downloading apps.
    I see v10.7.4 in your profile but make absolutely sure that's correct because the minimum requirements for Pages is v10.7.4 according to the Pages Information panel at the App Store.
    Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac.

  • TS1814 hello i have  a trouble with my i phone... i was trying to update a new software and at the end it says that there is some error and i cannot turn my i phone bak on all it shows is itunes logo in the midlle and usb cable with an arrow pointing to t

    hello i have  a trouble with my i phone... i was trying to update a new software and at the end it says that there is some error and i cannot turn my i phone bak on all it shows is itunes logo in the midlle and usb cable with an arrow pointing at the logo. If anyone knows what it is and what i should do please get back to me as soon as possible many thanks.

    http://support.apple.com/kb/HT1808

  • When I wanted to update the programs, it said that there was an error, and it still says so. I cant even see the different programs now

    When I wanted to update the programs, it said that there was an error, and it still says so. I cant even see the different programs now

    I have exactly the same problem here too. Followed all of the discussions and still unable to access programs

  • I am trying to put the files from my mac onto a seagate backup plus slim portable drive but as soon as I plug the hard drive into my laptop, a notification comes up saying that there was an error

    I am trying to put the files from my mac onto a seagate backup plus slim portable drive but as soon as I plug the hard drive into my laptop, a notification comes up saying that there was an error

    carriinna wrote:
    I am trying to put the files from my mac onto a seagate backup plus slim portable drive but as soon as I plug the hard drive into my laptop, a notification comes up saying that there was an error
    What kind of error.  What does it say?
    Ciao.

  • HT201210 my phone is stuck in the activation screen and when i try to restore  it says that there was an error  when trying to download  the request

    i updated my iphone 4 to ios6 and  today it doeasnt let me get out of my activations screen. it says the activation server is unavailabe. i just cant get out of the activation screen and use the apps nor se my phone. help please

    And i did it from my iPod

  • The whole of my Adobe Creative Suite needs updating but once I go through the download process it says that there was an error and the updates failed to download.

    It tells me to quit and try again at a later time. I tried to do one program at a time but it still doesn't work. How can I get these updates? I'm using a PC and CS5.

    I have the same problem

  • I rented a movie and whenever I try to download it, it says that there was an error in the Itunes store and to try again later.

    Please Help!

    That cryptic error message might mean that the payment information in your account is invalid. Check with your credit-card issuer to see whether a charge was denied. If not, see below.
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

  • My iPod is stuck on the startup screen, showing just the apple logo. Has anyone had this problem before? If yes, then how did you solve it?

    My iPod is stuck on the startup screen, showing just the apple logo. Has anyone had this problem before? If yes, then how did you solve it?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT1212 im locked out of my ipod, and the screen isnt responding when i go to swipe to unlock it or when i swipe to turn it off. But, in the top left hand corner, there is an outline of a box. how do i fix this

    im locked out of my ipod, and the screen isnt responding when i go to swipe to unlock it or when i swipe to turn it off. All of my notifications are there but i cant reply to any of them. My screen is completly unresponsive. But, in the top left hand corner, there is an outline of a box. how do i fix this?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • My iPad is stuck. The little box stating that there is not enough iCloud storage available will not close or allow me to go to settings....I have tried to shut it down but I can't access the slide to power off button either.  Any thoughts???

    Hey there Apple Users
    I would like some assistance with my iPad please
    My iPad is stuck. The little box stating that there is not enough iCloud storage available will not close or allow me to go to settings....I have tried to shut it down but it won't let me access the slide to power off button either.  Any thoughts???

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I just got an iPod 4th generation and Im trying to sync my iTunes songs from my dell laptop on to my iPod but it says I need iTunes 10.6.3. So I tryed to download it on the apple website but it keeps saying that there is an error. Any answers?

    I just got an iPod 4th generation and Im trying to sync my iTunes songs and books from my dell laptop on to my iPod but it says I need iTunes 10.6.3. So I tryed to download it on the apple website but it keeps saying that there is an error. I have already tryed uninstalling all Apple Inc. programs on my laptop then trying to install iTunes again but that has had no success what so ever. I have started to get very frusterated with this . Hopefully someone can help. I would really appreciate it. Any suggestion?

    So I tryed to download it on the apple website but it keeps saying that there is an error.
    What does the error message say? (Precise text, please.)

  • I was sycing my ipod with my computer to get a new album and itunes prompted me saying that there was a previous account for the ipod or something and if I should carry on and deletle it or cancel the sync. I wanted the album so I clicked carry on an

    I was sycing my ipod with my computer to get a new album and itunes prompted me saying that there was a previous account for the ipod or something and if I should carry on and deletle it or cancel the sync. I wanted the album so I clicked carry on and delete the account. When I checked my ipod afterwards all almost all of my music was gone exept for what I had just downloaded. This was thosands of songs that I had carefully picked over the years and now they are all gone. Someone please help me!!!

    Get all that music back in itunes and sync again.

Maybe you are looking for