My ipod just defroze but does not restore

anybody out there? i just got a responce from my ipod and plugged it inti i tunes to restore but not possible, any ideas?

thank god for you..... i am on the other side of everything in iran! please say something, my only friend has just come out of coma and i dont even know if he's lost his memory or what!

Similar Messages

I have reinstalled Acrobat Pro 9 following a hard drive re format. It opens just fine but does not recognize my serial number. My computer is running Windows 7 64 bit

I have reinstalled Acrobat Pro 9 following a hard drive re format. It opens just fine but does not recognize my serial number. My computer is running Windows 7 64 bit

Hi 12msonti,
Please try the following:
Delete the Adobe PCD folder and caps.db file:
Windows: \Program Files\Common Files\Adobe\Adobe PCD
\Program Files\Common Files\Adobe\caps\caps.db
Launch Acrobat and enter the serial number and check.
Regards,
Rave

My ipod will charge but does not show in itunes or windows

I tried to use my ipod as a disk to transfer my itunes library from my desktop to my notebook (both Dell), now my ipod charges, but does not show up in itunes or on either of my computers. I have used the advice of going to control panel and unchecking the box under power management but that didn't work, CAN SOMEONE PLEASE PLLLEEEEAAAASSSSSSSEEEEEEE HELP ME?
I have windows xp on one and vista on the other, if that helps.

This worked for me, don't know if it will for you. Have ITunes open. While IPod is connected to computer press(at the same time) the menu and center buttons until your screen goes black and shows the apple icon then immediately press the forward button. Your IPod should show up. It won't hurt to try it, even if it doesn't work. Hope this is of some help to you.

Ipod Touch Charges but does Not connect.

Hello,
I do not know much about computers and even less on how to fix any issues but here is my problem
When I connect my Ipod Touch, it will charge but will not show up in my computer. I have a Dell Laptop Windows 7.
here is what I have tried
Uninstalled Itunes and then Reinstalled it. (I deleted Everything related to iTunes)
Rest iPod by holding the Power and Home button. I even Turned it off and then On.
I went into my Computer under Services and Stopped then started my Apple Mobile Device and made sure it was on Automatic Start Up Type.
Plugged it in my Sister's Laptop and it installed the linked to her iTunes no problem.
ANy ideas?

Did you do everything here:
iOS: Device not recognized in iTunes for Windows
Including
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests

USMT Copies Data but does not restore data.

Can someone help me to shed some lite on a problem we are having? I am running an OSD task in SCCM2012R2. The Task Has the USMT option selected and enabled. When I run the OSD task on workstation I can see it run, I can even go to the directory
and see the data being backed up.
Now here is the problem, It won't restore. I can log back into the workstation (after OSD) using the exact same ID and none of the previous data is there:
No wallpaper, Bookmarks, Music, Documents, etc.
Ideas?

If there is no loadstate log file, it means that the action didn't even start. Are there specific things configured on the options tab of that step. Also, did the task sequence finish completely?
One last thing, make sure that your format step does NOT format your hard disk (so look at the options tab to see when it performs the actions of the step). Hard-links are stored locally so re-formatting your hard disk will cause a lose of your data.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Music is on my iPod touch 1G but does not show up in the Music App

Been having this problem the last week. I synced my iPod before I went to bed, grabbed it and headed off to work on Tuesday. Once I got to work I went to use my iPod and when I opened the Music App a screen popped up saying "Updating Library...This may take a few minutes". I didn't think much about that as I have seen it a number of times after I synced quite a bit of new music or podcasts(the night before I had 3 new hour long podcasts that synced).
Set my iPod to the side as that usually does take a minute, turned back and the screen said "No Content" and then some line about buying music in iTunes. I was quite surprised as I had never seen this screen before. I turned my iPod off and back on and the same No Content message.
I checked my Photos App and those were still there and so were all my saved photos that don't sync. Checked some of my other apps and the settings and saved data was all there too.
Finally got the idea to check the About option in the Settings. Knowing that it would list how many songs and how much space was free. Opened that up and it said 0 songs but that I only had 1.4GBs of free space. Which tells me that my music is on the iPod but just isn't being recognized.
Got home that night and synced it and once done I checked it and my music was there. Friday this all happened again and I have not been able to get my music to show up again even though my iPod tells that I have 12GBs of something on there going by what the About page tells me.
The only change I have made is I finally updated from just Itunes 10.0.X to 10.1.4 on 12/20 of last year. I have a iPod touch 1G that is running 3.1.3.
Last night I did a restore and created a whole new iPod but the same issue has happened. I watched it sync my ~2800 songs but when I went to check them, No Content but the About page tells me there is 12GBs of space being used. Right now I am going to a back from from June of last year to see if that works but I doubt it. I also have an old install of iTunes 10.0.1 that I think I might try.
What else could be the problem?

Which version of iTunes are you using?
Stedman

I was resetting my macbook pro 17 (early 2009) to factory settings but does not restore due to a problem with the restore disk. Please advice me on what to do next.

I was resetting my macbookpro 17 (early 2009) to factory settings but was indicating problems on the restore disk. I erased my macintosh hd drive so the hd is empty. What do I do next?

Get an external drive and make a clone of your internal, erase the internal, set it for 1 partition (OSX Journaled) and restore the clone.

Ipod Classic - recognised but does not sync

I have a Windows 7 laptop and an iPod Classic.
I am hoping to upgrade my laptop hard drive soon - most of one partition is iTunes.
I had a problem the other day which meant that I had to move iTunes to a different drive.
iTunes then failed to pick up most of the music I have loaded.
So I manually re-pointed iTunes, artist-by-artist to the new drive.
Since then, although iTunes recognises the iPod, it won't sync.
This could be because I didn't copy over all the artists - so that there are items on the iPod that aren't on the laptop.
I have tried to sync and nothing is happening - it's like the last update before re-direct Day

I had the same problem and ended up solving it by moving my plug from a hub directly to a mb usb header which allowed itunes to see my ipod.

My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

My nano 4th Gen. ipod will not sync album I just purchased from itunes. It says it is syncing but does not. Can anyone help?

My Nano 4th gen. ipod will not sync my new album I just purchased from itunes store. It says it is syncing but does not transfer music. can anyone help? I am using windows 7.
thanks,
B.H.

yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed. click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
click on music check mark music done and sync
problem solved
thanks apple

My ipod works in itunes but does not appear in "my computer" after I changed the properties

My ipod works in itunes but does not appear in "my computer" after I changed the properties.
First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
Any help would be very much appreciated. Thanks.

Hi,
To show up in Windows Explorer, you can try placing the iPod into
disk mode.
Moreover, i recommend you to
restore ipod to factory settings.
If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
Here is an article you can refer to below:
http://support.apple.com/kb/TS1369
To get more help, you can also redirect to apple support forum:
http://www.apple.com/support/ipod/
Thanks!
Andy Altmann
TechNet Community Support

30GB ipod does not play videos, it loads but does not streams...

i have a 30gb 5gen ipod, ant it has a problem... it doesn't plays video. video clips i used were converted in itunes, so it had to fit the requirments. video loads ok, but when i try to play it it shows play sign in the left up corner, however nothig hapens, just black screen. when i push the forward buton it goes forward and i can see that the video clip loaded well, it's just not streaming, looks like it is on pause or something. i have tried to restore it, reinstall it... nothing helped
please help!!!

Hard Reset the iPod as below- this does not delete or erase any song or data.
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck!

I have an Ipod touch 4th generation 8gb and it comes on but does not go past the apple logo

I have an ipod touch 4th generation 8gb and it comes on but does not go past the apple logo. What do I need to do?

This problem happened to me a month ago. The way I used to fix it:
1. Go it DFU Mode. For going into that, check this page.
2. Connect your iPod to your PC which has iTunes and iTunes will detect your iPod in recovery mode.
3. Press Shift + Restore if you have the .ipsw firmware file downloaded on your windows PC or just click Restore and follow the instructions to download the firmware file.
4. Wait and finally you're done!

IPad syncing stays on step 5 of 5 "waiting for items to copy" but does not copy anything... should I restore the iPad?

iPad syncing stays on step 5 of 5 “waiting for items to copy” but does not copy anything... should I restore the iPad?

Hey, I was having the same problem,, i just got mine to work. Take off everything but your apps (meaning take off pictures, music, ringtones, movies, tv shows, etc just leave on the apps) Then go up to the top and go to Store and turn off Genius. Restore your iPhone (It'll ask you to back up, click yes.) Restore from back up, Let your apps come back then when those are done add each category one by one. (i.e. click Photos -> Sync Photos and let them finish, then click something else like music) Hope this helps!

Ipod 30 gb player that downloads videos but does not show vidoe

I just received and ipod 30gb for Chirstmas and have downloaded several movies. The movies show under movies area, but when I go to paly them, it show the title of the movie and a square box next to it on the white screen but does not video on screen, only audio. Also, their is a small square box like a "house" in the right top part of the screen. Can someone please help me so I can get the video portion to play also.

Make sure the setting on the iPod (Main menu -> Videos -> Video Settings) for TV Out is set to OFF. If it is on, video output is sent to the headphone jack, not the LCD screen.
Patrick

My ipod just defroze but does not restore

Similar Messages

Maybe you are looking for