My ipod just died, it won't turn on or reset and itunes wont recognize the device..SOS

It was running low on battery so I plugged it while I was in my car, and when the screen went off I tried to use the ipod again and it never turn on again. I tried plugging it to my computer but it never detected the device. What should I do? Im freaking out.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
  Apple Retail Store - Genius Bar

Similar Messages

  • My ipod touch 5th gen won't turn on or reset and my computer won't recognise it. It's 1 day old and all I did was try to plug it into the speaker system

    My ipod touch 5th generation was purchased brand new yesterday. After charging it and loading my music i went to plug it into my icoustic dock which I got as a bundle with the ipod only to have my ipod screen go blank and now it refuses to turn on, reset or get recognised by my computer or itunes. I have the latests software as it was only uploaded last night. Should I be taking it back to the shop? Has anyone else had a similar problem?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • My 1st generation Ipod touch won't turn on at all and whenever I press the buttons to reset it all I get is a white screen, or a white screen with black lines across.

    My 1st generation Ipod touch won't turn on at all and whenever I press the buttons to reset it all I get is a white screen, or a white screen with black lines across.Help pleaseeeeee!

    You can work through the five 5 R's of troubleshooting to rule out the possibility of corrupted software.
    http://www.apple.com/support/ipod/five_rs/
    It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
    Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity.  A third party service will actually replace the damaged part for a little less.  Google "iPod screen repair" and you should get a number of results to work with.
    B-rock

  • My iPod touch 5th generation won't turn on or charge and the home button is broken, how do I get it working?

    I've tried buying new chargers and plugging them into different outlets around the house but the iPod will not respond to anything.  The home button is broken so I can't reset the iPod by holding both the home and lock screen buttons down, and it won't even connect to iTunes when plugged into my computer.  How can I fix this issue? The iPod never overheated or anything, and it still had charge left before it quit responding.

    Unfortunately for you, the home button is necessary for reset and also to put the device into recovery mode or DFU mode. Since that is not working, and the device is not recognized in iTunes, check the charging port area. There could be dust, lint, etc, that is blocking the connection for charging, and connecting to iTunes. If nothing seems wrong there, then make an appointment at the Genius Bar of the nearest Apple Store or Authorized Apple Service provider, depending on your location. There is no other option.

  • I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well.

    I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well. However, itunes can not do anything with the phone because the phone is locked and I can not unlock the phone because the screen is black.
    >CURVEBALL!!!<
    The screen does work though! Through trial and error along side a little troubleshooting, I was able to figure out that the screen will cut on after the phone dies completely. The phone has to die completely with no battery power left. Then if I plug the phone into a charge and wait a while for it to charge, the phone will turn on like nothing was ever even wrong with it. I charge the phone up to like 30% and turn it off then bam the phone turns on but the screen is solid black again.
    I am currently in the process of waiting for the phone to die and when I turn the phone back on I am going to completely remove the auto-lock and lock code off of the phone for the time being.
    Any other suggestions? Please help!

    Sounds like the device was dropped at some point and damaged as a result.
    Take it to Apple for evaluation and a replacement.

  • My home button is broken ipod touch 5th generation and wont open and itunes wont recognize it

    my home button is broken ipod touch 5th generation and wont open and itunes wont recognize it

    Turn on without Home/Power Button

  • I bought an iPod nano and Itunes does recognize the iPod but when I try to sync it will not let me.

    I bought an iPod nano and Itunes does recognize the iPod but when I try to sync it will not let me. What now?

    How do you know it will not let you?  Are you getting an error message?  What is the error message? 

  • I just got an iPhone 4s, and want to sync some music to it, but itunes wont recognize the phone. what do i do to make the phone show up in itunes?

    I just got an iPhone 4s, and want to sync some music to it, but itunes wont recognize the phone. what do i do to make the phone show up in itunes?

    windows http://support.apple.com/kb/TS1538
    macs http://support.apple.com/kb/TS1591

  • First, I've read the manual. This new Nano won't sync and won't charge. Itunes does recognize the device. When it's connected to a Windows PC, the battery indictor shows charged. When it's not connected, the indicator shows no charge. I've tried this on t

    First, I've read the manual. This new Nano won't sync and won't charge. Itunes does recognize the device. When it's connected to a Windows PC, the battery indictor shows charged. When it's not connected, the indicator shows no charge. I've tried this on two PCS without success.

    Maybe the Nano you got is defective. Have it replaced.

  • My Iphone doesnt turn on after updating. It keeps on blinking the apple logo, even after seeing the low battery image, i tried to charge the iphone. Then I tried to connect to itunes. But itunes cant recognize the device. What should I do?

    My Iphone doesnt turn on after updating. It keeps on blinking the apple logo, after seeing the low battery image, i tried to charge the iphone. After charging for 30 minutes, it still wont turn on but keeps on blinking the apple logo. It has been blinking for 2 days. Then I tried to connect to itunes, but itunes cant recognize the device. What should I do?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps..
    But... if the Device has been Modified... this will Not necessarily work.
    Unauthorized modification of iOS  >  http://support.apple.com/kb/HT3743

  • When i try to sync my ipod classic my computer wont recognize the device

    when i try to sync my ipod classic 80gig my computer does not recognize the device and will not sync. I have restored reset and installed the latest version of itumes

    Hello esiuolyma,
    After reviewing your post, it sounds like the iPod is not recognized and that will not allow you to sync. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    If you don't see your connected device in iTunes for Mac - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • My iPod touch 5th gen won't turn on after updating to iOS 8 using the computer,help!?

    On my computer (using windows) I tried to update my iPod touch 5th gen to iOS 8 using iTunes, using this website http://www.gottabemobile.com/2014/09/17/the-secret-to-skipping-long-ios-8-downlo ads-and-problems/ as a guide.
    It kept coming up with this error http://support.apple.com/en-us/HT201442 after the update.
    Now my iPod won't turn on and it shows the charger with the lightening with an arrow above it pointing to the iTunes logo.
    So i plugged it into iTunes but i don't know what i'm supposed to do, any help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Nano (4th gen) won't turn on after reseting and I need itunes support

    A couple of weeks ago, my family computer crashed when we were trying to install a sercurity program. The computer company sent us a disk to bring the computer back to its original state. (This was supposed to make the computer be like it just came from the factory when we first got it) The disks didn't work and we sent it to a local computer repair center where they fix stuff like this.
    So anyways, now that the computer is back to when we first got it, I'm afraid that if I downlaod itunes, sign into my account, and plug my ipod into the computer that all my songs and PURCHASED songs will disappear and I will be out more than $200.
    Now it's Oct. 30th and my ipod will not come out of sleep for anything. I've tried all of the things they offer on Apple's support webpage. I plugged it into my wall adapter and it's making a funny buzzing noise.
    Please help me with these 2 issues I'm having.
    Thanks so much.

    My 4th Gen iPod Nano won't turn on once it is off the USB cable. If it is connected to the iMac (iTunes 10.1 (54)) it works perfectly well (synchronizes, plays music). Have tried to reset it (holding the Menu and Center buttons) and to reset it to its original settings (current SW version is 1.0.4) and it still wont work.
    Any suggestions?

  • HT201210 I tried to update my iPod to the latest version and it didn't complete.  says it could not be updated and my iPod froze with the apple icon and the progression bar.  it won't go away. iTunes doesnt recognize the device.

    I tried to update the latest version for the iPod touch and it couldn't complete the install.  my iPod screen had the apple icon with the progression bar when it couldn't update and it stuck there.  iTunes doesn't recognize my device. 
    How do I restore, if iTunes doesn't see my iPod?

    Plug your device into iTunes. Hold the home & sleep buttons at the same time. After 10 secs release the 2 buttons. iTunes will tell you it's found a device in DFU mode. The iPod screen will stay black. At this point do a restore. If you see the Apple logo you have held them for too long.

  • TS1369 my ipod wont connect to my laptop, but it's charging on my charger and the ipod works well. but when i connect it to my laptop it wont recognize the ipod at all

    I have turned off the ipod and connect it, for i think it would work but it doesn't.
    restarted my laptop still the laptop doesnt recognize my ipod
    try it with another cable and it doesnt work  either
    restart the spring board doesnt work too
    detect a device on my laptop a thousand times but it can't detect the ipod
    Help me

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • Problem installing SSGD on Solaris 9

    I am trying to install SSGD solaris package and I am getting the following error: ========= /var/tmp//installpDaG7s/checkinstallsDaG7s: /tmp/ttainst_0: permission denied pkgadd: ERROR: request script did not complete successfully Installation of <tta

  • IOS 7.1 iTunes sync problems

    I updated my 64 GB iPhone 5 to iOS 7.1 the day it launched. Since then, I've had several bizarre issues with syncing music in iTunes. Certain songs will not sync that worked perfectly well prior to the update, without any error messages or other indi

  • Session Management

    I have written a login application, implementing struts. After sucessful login, a menu item will be displayed to insert and retrieve values to and from database and a logout option. I set the session in the login action and invalidated it in the logo

  • Is it worth upgrading the G4 beyond 1G of ram?

    Hello, I have a 400Mhz G4 which I have upgraded to a sonnet 1Ghz processor and with 1g of ram. This has been the best computer I've ever had. 10 Years of reliable service. It has really started to show it's age in the last year and really appears slo

  • Common communication channel

    Hi , We have a scenerio which will be rollout to different countries. In most of the cases common communication channel can used We are using different Bussiness System for all countries, now creating channel all roulout under different BS will incer