My ipod just wont go hom or power off e stuck in settings help please it was my brothers that recntly passed away

Stuck in settings

Try:                                               
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable       
- Try on another computer                            
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Similar Messages

  • I cannot retrieve the password for the wifi connection on my imac and so cannot access the internet with my ipad at home.  I have a cable modem. Help please!

    I cannot retrieve the password for the wifi connection on my imac and so cannot access the internet with my ipad at home.  I have a cable modem. Help please!

    If you mean that you cannot remember the password for your WiFi network this will work for you - or it should work if you are the administrator on the Mac.
    You will need to be logged in as the administrator on your Mac and you must know the password - Open Keychain Access on your Mac in the utilities folder, click on Passwords. Find the Airport Network Password listed on the right. Double click on it. Click on show password in the the window that pops up. Enter your administrator password when prompted and click allow.
    If Keychain is locked - you must enter the administrator password there as well to unlock it and access the password.
    If you have set the Mac up for Internet Sharing for the iPad to share the Mac's connection, just create a new network On the Mac with Internet sharing and a new password.

  • My ipod touch wont connect to wifi after i reset the network settings

    my ipod touch wont connect to wifi after i reset the network settings

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • What do i do if my ipod 3 is disabled and the power off button does not work?

    What do I do if my iPod 3 is disabled and  the power off button does not work?

    Did you try restoring your iPod on itunes.

  • I have an Ipod touch and cannot take it off headphone mode, Can anyone help please.

    I have an Ipod touch and cannot take it off headphone mode, Can anyone help please.
    Thankyou

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • DOES ANYONE KNOW HOW I CANT DELETE MY APPLE ID I JUST GOT A NEW AND NO LONGER NEED THE OLD 1 HELP PLEASE

    DOES ANYONE KNOW HOW I CANT DELETE MY APPLE ID I JUST GOT A NEW AND NO LONGER NEED THE OLD 1 HELP PLEASE

    As far as I know they can't be deleted, just remove any personal info from it (credit card details etc) and stop using it.
    If you downloaded any content via it then you will need to remember it and it's password, as content is tied to the account that bought/downloaded it, so if you move to a new computer you'll need to authorise the account on it if you want to use any of its content there (or if you bought apps with it you'll only be able to download updates to them via that account)

  • My macbook pro 2010 extremely noisy and a warning flashed on the screen about a power or battery issue- can you help please?

    My macbook pro 2010 has started getting extremely noisy in the last few months and I had a strange warning flash up on the screen a month or so ago about a power or battery issue… can you help please?

    Calibrating a 2010 MBP is not required.  All it will achieve is putting an unnecessary cycle on it and shortening its life:
    http://support.apple.com/kb/ht1490
    You may try a SMC reset:
    http://support.apple.com/kb/HT3964
    Open System Information>Power and post the following from your MBP:
    (Make certain that the charger is connected)
    Ciao.

  • The ipod just wont sync or play any song. gives error 1439. what am i suppose to do? i cant even restore it...   any suggestions?

    ast night i tried to sync my ipod fr a couple of songs that i just bought, but it just wont sync. gives the 1439 error. tried restoring it, and even that failed. now my ipod shows 0 songs or videos on it, and it wont even sync. anyone with any thoughts on this?
    i just updated the itunes to version 11.0.3.42.
    is that the issue?

    Hello rafiquethics,
    The following article contains further information regarding this particular error and steps for resolving the issue.
    iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
    http://support.apple.com/kb/TS1372
    Resolution
    Note: If you have an iPod shuffle you may need to use the iPod Reset Utility to restore the iPod. If you are not sure which iPod you have, see Identifying iPod models.
    To troubleshoot this issue, try the following solutions in this order:
    Disconnect and reconnect your iPod to iTunes, and then attempt to restore or update the iPod again.
    Restart your computer and then attempt to restore or update the iPod again.
    Try connecting your iPod to a different USB port, and then attempt to restore or update the iPod again. Connecting to a USB 2.0 port is recommended. For Windows computers, refer to Identifying USB 2.0 ports on your computer for instructions.
    Remove any USB devices not manufactured by Apple that you have connected to your computer (it is not necessary to remove your keyboard or mouse). Then, attempt to restore or update the iPod again.
    Update to the latest version of iTunes, and then attempt to restore or update the iPod again.
    Try to restore or update the iPod again using a different user account for your computer. For example, create a new test user account on the computer with admin rights, and with iTunes installed, try to restore/update the iPod. For instructions on how to do this, follow steps under the heading "Restore using a new user account" inthis article.
    Try disabling Disk Use on your iPod and attempt to restore or update the iPod again. If that doesn't work, try enabling Disk Use on your iPod and attempt to restore/update. Refer to Putting iPod into Disk Mode for instructions.
    If using a Windows PC to restore or update your iPod, try to reregister ".dll" files as described under "Solution 1" in iTunes displays -50 error message when syncing iPod on Windows XP
    If using a Windows PC, try to update or reinstall your Windows USB drivers, referring to the section titled "iPod only: Updating, or in some cases reinstalling, the drivers for your computer's USB interface may resolve this issue."
    Cheers,
    Allen

  • Help!!!!!!!!!!! Ipod just wont be recognized by my windows.................

    Hi,
    Let me first thanks apple for their prompt (mis)service.
    I had a small hitch when my i pod woudnt just charge on my windows PC.
    I took it to the "authorized" service center and they found nothing wrong. They just erased all my data and reinstalled the i pod software.
    All this was done on a Mac.
    I was told that i must format the ipod after connecting it to the my windows PC.
    Now the i pod connects and all. But it is just recognized as an external disk.
    I try formatting it, the format window jus remains as such.
    I am not able to format it at all.
    Now my i pod is formatted for a Mac system.
    i jus dont know how else to reformat it to suit my windows pc.
    Believe it or not my ipod is just 4 months old.
    Please help.

    Try placing the iPod in recovery mode and then restoring via iTunes.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • 3rd gen iPod Touch (refurb) keeps asking to power off.

    Hi, just purchased the above for my son and it keeps going to the slide to power off screen without pressing the off button. This occurs sometimes every few seconds (you can just hit cancel ok and it does)then stops. Sometimes it doesn't happen at all. Is this a setting somewhere? I have searched but cannot find anything. Help!

    - First try resetting your iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next would be to restore from backup via iTunes
    - Then restore to factory defaults/new iPod via iTunes
    - Last would be to make an appointment at the Genius Bar of an Apple store or call AppleCare.

  • Sky+ HD box unresponsive, slow and sometimes just freezes requiring a reboot/power off

    Hi, I have a standard Sky+ HD box which must be a few years old now with the following specs: Model Number: R010.070.87.00PVersion Number: 9730B3Manufacturer: Samsung Recently the box has become really slow to respond to the remote control when either watching recordings or just live TV.  Also, frequently not responding at all after a period of time which resorts in a power down using the power off button and unplugging the mains, leaving for 30 seconds then plugging back in.  this issue seems to happen most whilst watching recordings although it has happened whilst watching live TV also. I appear to be running the latest software so these issues really all point to the recent code update. I have also performed several planner rebuilds with no affect/improvement at all. I've checked the batteries in the remote, which are fine and new. The box is in a well ventilated cupboard, stood on chocks to allow airflow all around the box. I rang Sky from work to report the issue and get help but the engineer could not help me unless I was in the same room as the box, so this is my next step to call them whilst at home. I wonder whether I can push this issue and get another box or a newer 2TB box gratis rather than having to pay the £150 fee.  this could be the tipping point to force me over to a different option such as Freesat or Nowtv etc This is so annoying and is going to make TV viewing over the christmas period a real pain for all the family. Thanks for any help and advise, Cheers, Jason

    I'm getting the same problems with a Sky HD+ 1TB Amstrad DRX 895 - On power-up from cold it's OK, but the longer it's left on, even in standby, the slower it responds. Eventually it just hangs, and the problem is getting worse. I found that turning off HDMI Control in the Settings improved matter a bit (why does it default 'on'?), but that just delays the inevitable. At first I suspected a software problem, such as a memory leak that built up until it crashed the box, but the fact that it won't run properly after a reboot - even after powering off - unless it's left to cool down, suggests it's a hardware fault. Some previous Sky box models have had power supply problems when the box reaches a certain age - the capacitors start failing, causing the same kind of problems. I had such a box, and got a replacement power supply kit which fixed it. I think it's likely the newer boxes have this problem too - they're built with the cheapest components that don't last well. You might find the SatCure site can help - they have lists of repairers around the country who can fix Sky boxes or sell you DIY repair kits, or refurbished Sky boxes for less than a new one. I'm going to check out my local repairer.

  • Ipod touch is "frozen" can't power off or connect to itunes

    I was listening to music on my ipod touch when the song stopped and would not play again. Took my headphones out, put them back in, still nothing. Powered down to see if that would work. Put the ipod in my pocket after powering down and checked it a couple hours later and it was frozen. Now, if I push the power button the screen shows a cable connecting to the iTunes icon. When I push and hold the power down button I am unable to slide the power off button...the touch screen does not work. I connected to itunes but received a message stating it was unable to connect because my ipod was locked and I need to enter my password on my ipod....but it's locked! Ideas?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I have an ipod touch 4th gen and my power botton is stuck is there anywhay to fix it???

    so i have a 4th gen ipod touch and my power botton got stuck. is there anyway to fix it besides sending it in or buying a new one????

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Black screen, no logo after home/power pressed.....Help please, ipad mini 4 days old

    Please help....recently purchased an ipad mini...last night it was charging so I know it's not flat....unplugged from outlet, and put aside....went back to it later to find it would not turn on...even after trying the home/power button reset....still nothing, it was also very hot....don't know what else to do. I left it sit over night....checked again, it's now cold...tried the buttons again and still nothing........ It also won't show up in itunes......
    Any help appreciated.
    Thanks

    Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • My Ipod Touch won't show up any network names no matter what I do. I have tried to reset the settings, the Ipod and just turn it off for a while. Help please?

    Help please? newest Ipod model.

    This article may help if wifi is grayed out.
    Unable to use Wi-Fi or Bluetooth with iPhone or iPod touch because there's no address listed for the device

Maybe you are looking for

  • How can I mount a CD Drive in Single User?

    Thank you for reading my question.  I need to run single user mode on my iMac because of a disk problem.  I would like to be able to mount the cd drive while I am in single user mode.  I would also like to be able to mount usb hard drives with confid

  • How to suppress the Save Dialog before closing the form?

    Dear all, I created a form which will open a data connection on a button click. I catch the error on failure and code to close my form by app.execMenuItem("Close"); but a Save Dialog will appear before I can close it. (may be because I have done some

  • How to check DFS replication status in windows 2008 r2 file server

    Hi, I have created File server DFS namespace between 2 windows 2008 R2 server. namespace mode is 2008. I have copied 3 TB data on file server 1. now it is getting replicated from file server 1 to file server 2. till now the data is not fully replicat

  • Pop-up window

    I want a pop-up window with no menubar or toolbar and scrollbar. Below is the code i used but still i can see menubar,toolbar,.. i have used no whitespaces to avoid ignoring of the code. Still it is not working. function popit() window.open('','_popu

  • Trying to download Illustrator CC, it tells me to sign in, then immediately signs me out???

    I just purchased the monthly Ilustrator CC subscription.  I already installed it, then when I go to open it in my download files, it tells me to sign in.  When I sign in, it immediately signs me out every time. Don't know what the problem is or how t