My ipod keeps connecting and disconnecting from the computer

I've tried everything, first my ipod kept displaying the folder with the exclamation mark, then a couple of days ago started working again. It then wouldn't play any songs and just kept skipping. So I plugged it into my computer to restore it so I could start again. Now its displaying the folder with the symbol again, and just keeps connecting and disconnecting all the time so I can't do anything to it. Keep trying the ipod updater but says it cant mount ipod.
Any ideas????

Hello all,
I've been experiencing the same problem, but have managed to get it sorted.... well sort of.
As Jen's problem, I had the exclamation mark and after unsuccessfully trying to update etc decided to leave it out of frustration.
A day or so later it started to work again, great!!!
A few days of problem free use then I got the sad Ipod screen.
After checking the website I've restored and I'm now a week later and still trying to get my music from Itunes onto my Ipod.
The problem now, once again very similar to Jen's is that my Ipod only seems to connect to my PC for period of time and then disconnects, sometimes updating a few songs.
I get different 'Unknown Error' messages usually -124.
I've tried with both USB and Firewire connections and even when my Ipod disconnects it still charges, so it's not the port at fault.
Can't help but think it's the actual Ipod which is causing me this hassle and musicless journeys!!!
Any ideas?

Similar Messages

  • Why does my iPad keeps connecting and disconnecting from the new late 2013 iMac

    Hi there,
    I've recently bought a new late 2013 iMac and ever since then I'm not able to connect my iPad 2 to it. When I do connect it keeps connecting and disconnecting  again and again for some reason. The cable is fine and I've tried it with other devices. Just wondered why this is and whether you guys can help me out.
    Thanks a lot!
    CitizenJohnny

    Hi,
    I had the same problem and just found a solution. I tryed restoring all content and settings on the iPad (Settings > General > Reset > Erase All Content and Settings). It took lots of time, however it didn´t work because when I connected the iPad and iMac the problem persisted.
    Then I thought it wasn´t an iPad problem but iMac OSX problem. So I searched the web for "Reinstall Mavericks" and found this http://support.apple.com/kb/PH13871?viewlocale=en_US&locale=en_US.
    It also takes like 6 hours with my internet speed. Next day I connected the iPad and everything is just fine.
    I described both processes because I don´t know if in the end the iPad reset helped in the solution.
    Hope that helps! good luck

  • Apple iPhone 4 keeps connecting and disconnecting from new Macbook Pro 13. What is supposed to be done?

    I have a windows desktop in my office and my iPhone 4 works pretty fine and gets charged and gets connected to the iTunes. However, I just purchased a new Macbook Pro 13 this Nov (2014) and I can't seem to connect my iPhone. it keeps connecting and disconnecting. its very annoying. i saw similar posts and threads but there is no resolution! please help

    Hi there ceaselesschat,
    Welcome to Apple Support Communities.
    The article linked below provides a lot of great troubleshooting tips that can help you resolve the issue with your iPhone 4 disconnecting from your MacBook Pro unexpectedly.
    iTunes: Resolve USB-related alerts - Apple Support
    Take care, 
    -Jason

  • IPhone 4s keeps connecting and disconnecting from my new Macbook Air 2013

    Ok I've been having this problem, I recently got an 11 inch Macbook Air 2013 and after I try connecting my iPhone 4s it keeps connecting and disconnecting every 1-2 seconds. I already check the community, I know this subject has been asked many times. Nothing worked out though. My cable cord must be fine because it works perfectly on my PC. I updated the OS and iOS to their latest firmware and still nothing. Whenever I try opening iTunes I get this message saying " iTunes could not connect to this iPhone. This device is no longer connected. " Please if anyone fixed this issue I would appreciate some help. Thanks in advance.

    I just solved it, I hope this helps everyone who is experiencing the same problem. Apparently the iPhone seems to charge normally and connect to iTunes if the iPhone battery is over 60%-70%. This must be a power issue the MBA has.

  • Outlook keep connecting and disconnecting from exchange 2013

    hi, currently im having microsoft exchange 2013 in server 2012 standard. when i running my outlook 2007/2010/2013 , it will keep showing connecting and disconnected. once i restart microsoft exchange rpc client access and it will be working fine for temporary,
    around 10 min later and it will happend again, can advise?

    Hi,
    You can raise it via Regedit:
    http://technet.microsoft.com/en-us/library/ff477612(v=exchg.141).aspx
    Thanks,
    Simon Wu
    TechNet Community Support

  • Ipod keeps connecting then disconnecting

    I've tried everything possible to try to make my Ipod mini work. I can't connect it to the PC because it keeps connecting and disconnecting repeatedly. I can't restore it since I can't connect it. I've tried all the different USB ports and I've installed and uninstalled all the programs a few times. I've also reset it connected and disconnected. It has worked before but now it won't! This is driving me nuts

    Similar problem here too plus when I do manage to get them to connect they will not charge.
    Both my classic iPods work fine, in all my computers, and show that they are charging, but my family have 3 nanos, a 4th and two 5ths. Although they all connect to my PC and my laptop fine, none of these will connect correctly to my daughters PC no matter what USB port I put them in.
    I have checked in device manager that the ports are powered (500ma) and nothing else is there to infringe on this supply. Still these items connect and disconnect constantly. Ironically every now and then, they will connect and allow me to look at the files etc in iTunes. I have at one point had two nanos and my classic connected to her computer and they all worked fine for about an hour, I thought that I had finally got rid of the problem but one by one the nanos started to play up again so this exacerbates the problem somewhat.
    I also get various warnings when the Nanos are trying to connect like, software driver failure to install, it will work faster in a high speed USB port, nano needs formatted to work in windows plus a host of others. When I plug them back into my PC they connect fine, so that all adds to the confusion. If this was one nano I would suspect that it was faulty but it is three different ones.
    I have done the 5 Rs, I have even gone as far as upgrading from XP to Windows 7, I have plugged the units into every USB port, I even bought a new PCI/USB card and tried that and still this problem persists.
    I would like to hear from someone with any suggestions as to what is causing this and how to fix it.

  • My ipod nano is fully charged (I believe) but every time i disconnect from the computer it turns itself off

    My ipod nano is fully charged (I believe) but every time i disconnect from the computer the screen just shuts down and nothing happens. Occasionally it might work but the battery is already as low as it can go and turns it self off. What should i do?

    So the iPod only powers on when connected to an external power source such as a USB port on your PC or when connected to a wall charger?  If so, that is a very good indication that your iPod's battery is shot and in need of replacement.
    Apple can swap it out for a flat fee or you can send it to a third party repair service for a bit less.
    B-rock

  • My iPad 3 keeping connect and disconnect on my Macbook Air 13-inch, Mid 2013.

    Dear Team,
    I was wondering my iPad 3 keeping connect and disconnect on my Macbook 13-inch, Mid 2013.
    But when i pluc into my Macbook Pro, everything is working find and normal.
    My MacBook Air running on Mavericks and iTunes 11.1.3 (8).
    Please help.
    Regards.

    Format of the Drive
    Windows NT File System (NTFS)

  • My ipod nano will not eject from the computer and it says that it is connected even tho i have hit the eject button on itunes. What do i do????

    I have tried to disconnect my ipod nano from the computer and it continues to say that it is connected. I am afriad to unplug it because I did that a few minutes ago to try and fix it and I had to reset it. It was completely synced when i hit the eject button. PLEASE HELP!!!!!!!!!!!

    Right click on the iPod Nano icon.  "Eject" should pop up.  At least that is the way it works on Macs. 
    Just found this: 
    iPod: How to Safely Disconnect if iPod doesn't eject

  • IPod keeps connecting then disconnecting immediately... help?

    So, I bought my iPod nano in April and it worked perfectly until about 1 month ago when my computer suddenly stopped recognizing it, and now whenever I try to connect it it disconnects after 1 second, then connects again, then disconnects etc etc....
    I know this is a known issue cause as I've been trying to solve this for one month I've done some searching and seen plenty of other people having the same problem, but no one seems to have a resolution that works.
    Basically my exact same problem is described in these 2 threads:
    http://discussions.apple.com/thread.jspa?threadID=2240335&tstart=0
    http://discussions.apple.com/thread.jspa?threadID=1847791&start=0&tstart=2
    I've done every thing suggested but no luck... I went back to the store as well and they didn't find anything wrong with it, so obviously it's my computer (I tried it at my mom's work as well and it worked there) but I don't know what's causing the problem. I don't wanna get my iPod replaced or buy a new one because it might just as well happen to that one too and then I'm stuck in the same boat again. Getting a new computer isn't really an option either. :/
    So, any kind of help that hasn't been suggested already would be highly appreciated...
    thanks in advance

    Similar problem here too plus when I do manage to get them to connect they will not charge.
    Both my classic iPods work fine, in all my computers, and show that they are charging, but my family have 3 nanos, a 4th and two 5ths. Although they all connect to my PC and my laptop fine, none of these will connect correctly to my daughters PC no matter what USB port I put them in.
    I have checked in device manager that the ports are powered (500ma) and nothing else is there to infringe on this supply. Still these items connect and disconnect constantly. Ironically every now and then, they will connect and allow me to look at the files etc in iTunes. I have at one point had two nanos and my classic connected to her computer and they all worked fine for about an hour, I thought that I had finally got rid of the problem but one by one the nanos started to play up again so this exacerbates the problem somewhat.
    I also get various warnings when the Nanos are trying to connect like, software driver failure to install, it will work faster in a high speed USB port, nano needs formatted to work in windows plus a host of others. When I plug them back into my PC they connect fine, so that all adds to the confusion. If this was one nano I would suspect that it was faulty but it is three different ones.
    I have done the 5 Rs, I have even gone as far as upgrading from XP to Windows 7, I have plugged the units into every USB port, I even bought a new PCI/USB card and tried that and still this problem persists.
    I would like to hear from someone with any suggestions as to what is causing this and how to fix it.

  • Android / USB devices keep connecting and disconnecting on R7

    My daughter has an R7, and she is having a weird problem with the USB ports on it.No android device can stay connected. As soon as you plug it, it makes the connect sound then the disconnect sound and keeps cycling between connecting and disconnecting. It is not related to the device as I have tried two different phones and one tablet all with different cables, all work fine on other computers. And I tried on the three available USB ports of the laptop, all behave the same. Searching online I found a lot of people with similar issues mostly unresolved. I did disable the USB suspend option in the power options without any results, as well as uninstall all USB hub so they would be reinstalled at boot time, and installed all optional windows updates. She is also experiencing another issue on her USB ports, we have a Samsung slim external DVD player that uses a Y USB cable for data and power that also works fine on any other machine. On her R7, when playing a Video, the video keeps making blocks at regular intervals like something is preventing the full data stream. Wondering if this is related. Apart from that, USB mouse, USB keys or external USB drives appear to work fine. Anyone with a similar issue and a definitive fix?  

    Thanks, but I seem to have found a solution to both issues. 1) Regarding the android devices that kept disconnecting and reconnecting, after readiong this threadhttps://support.microsoft.com/en-us/kb/2900614 I checked what registry keys were present on my wife's surface pro3 for
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_XXXX&PID_XXXX\YYYY\Device Parameters and found that there was three DWORD values in there that were not present on the R7SelectiveSuspendEnabled
    EnhancedPowerManagementEnabled
    DeviceSelectiveSuspended So I added these 3 DWORD and set them all to zero, and the issue is gone. You may not need the three of them, but I have not tested them one at a time yet. 2) For the External DVD blocky playback, it turned out to be quite trivial. Someone had enabled hardware acceleration in the VLC player settings. I reset all the VLC settings, and it worked fine from there. Hope this can help others 

  • USB key keep connecting and disconnecting

    Hello,
    I've recently bought a Satellite L655D-12P computer and I have a Sony USB key ( USM8GL).
    The issue is that my key connects itself to the PC, then disconnects, reconnects etc... and keep doing the same thing indefinitely every 5 seconds.
    I don't understand why the 2 medias don't work properly. They seem to work well independently:
    - My USB key (USM8GL) work well on XP, Vista and other 7 that mine
    - My sister have the same model of USB key (USM8GL) and it's the same issue. Good for XP, Vista and other 7 that mine.
    - I've another key (Sony Microvault 4 Go) which works good on my PC (and others of course).
    It seems that something's wrong. Maybe a program that is not activated.
    I've of course looked a little on the internet but I didn't find anything.
    Once, I succeded to make work the both media together. I succeeded to change the letter of the key in the 'Computer' (H: --> L: for example). I had to do it very quiclky because the key keeps connecting and deconnecting every 5 seconds.
    But I don't know why, it stopped working after about 10 tries.
    So, of course, I would like that you help me. What can I do to fix this problem? That's really annoying...
    Thanks

    In my opinion there is not much you can do about it. Either it works or not.
    Fact is that there is no special driver you need for it.
    Try to connect other USB sticks for testing. Check it with SanDisK. It is the best and really high quality product. I am 100% sure it will work properly.
    By the way: does the same happen on all USB ports?

  • IPhone 4s connects and disconnects from Windows 8

    Apologies if this has been asked before as i'm sure it has but I can't find a solution.
    I have a new HP Compaq laptop using USB 3.0, when I connect my IPhone 4s to my laptop it connects and disconnects every seconds, I've looked in the device manager and can't find anything to do with Apple in there.
    Has anyone found a solution to this?

    Hello Aqib2024,
    Thank you for providing the details of the issue you are experiencing with your iPhone 4s.  You have taken some really good steps to isolate the issue.  I recommend following the steps in the article below to further isolate and troubleshoot this issue:
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/TS1286
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • All iPhones constantly connecting and disconnecting from 2014 MacBook Pro with retina display

    So I have an iPhone 6, 4s, and 3gs, whenever I plug any of them into my MacBook pro they rapidly connect and disconnect. After about 20 seconds of doing this they trackpad and keyboard stop responding and won't be recognized until I restart the laptop.
    Just as more information I have used 5 or 6 different cables and it works fine with my LG G3 and every other usb device I use. I have iTunes updated to 12.0.1 and OSX updated to 10.10, and this has been happening for about 2 months or so. My iPhone 6 is running 8.1 but did this before, although with the first sync when I first got the phone it worked fine.
    Any information would be helpful
    Thank you

    I'm having the exact same issue with the new 2014 iMac 5K Retina i5. iPhone 5 and iPhone 5s both work flawlessly.

  • Why would iSight "disconnect" from the computer during iMovie recording?

    I was just in the middle of recording a song, got to around 7 minutes when all of a sudden the iMovie recording panel went to blank with a big red sign saying "NO CAMERA CONNECTED". When I went back to the little drop down menu to record and selected "iSight built in" it allowed me to record again.
    What could cause this? I am running very low on disk space ATM, somewhere in the region of 200MB left until I transfer all my recordings from today onto my external, could that have something to do with it? Maybe not enough virtual memory space left to run the camera?
    Although in fairness I have 2GB of RAM and nothing else is running except one window in Safari (with only text) and a youtube window in Firefox...
    Anyone know? And is there any way to prevent this from happening? I assumed since iSight is built in it couldn't "disconnect" from the machine, and in the middle of filming? Seems very odd...

    Insufficient disk free space can certainly give trouble:
      http://docs.info.apple.com/article.html?path=iMovie/HD/en/im37.html
    With only 200MB left, you definitely need to free up some space-think 10s of gigabytes free if possible:
      http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1968.html
    If you need still more space, some of the ideas from the 10.6 Help version of this file be helpful:
      http://docs.info.apple.com/article.html?path=Mac/10.6/en/8358.html
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
    LED Cinema Display  G4 PowerBook 1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

Maybe you are looking for

  • Problem with Purchase

    Hello My name is Paul Baker and I'm from Kalamazoo County Emergency Management in Kalamazoo Michigan.  A couple months ago we purchased on line the Adobe product for converting PDF's into Word Documents.  Now we've used it several times including onc

  • Very high pitch sound on new Quad

    Just got my Quad yesterday Everything is good, except that it has a very high pitch sound that is very annoying and it hurts my ears in the long run. I disconnected the HD and superdrive to see if I could locate the source, but it is still there. I t

  • Last date of invoice in report

    Dear experts, could you help me with inserting right column" last date of document" in this query? Thank you in advance, jonmar7 SELECT DISTINCT T0.[CardCode], T0.[CardName], T2.[SlpName], T4.[ItmsGrpNam],  (SELECT TOP 1 T1.DocDate AS 'Last DocDate'

  • Ampersands in hyperlink

    Hi there, In our architecture, we have developed a perl script to authenticate user before allowing a report to be generated. Thus, all hyperlinks in a report X that would produce another report Y must point to the perl script, passing the name of th

  • Color replacement not working as expected

    Hello - I'm touching up some artwork and I've tried using both the color replacement tool as well as the color replacement adjustment and neither is giving me the results I would expect. The image has been indexed and I'm not using anti-alias so it's