My ipod keeps flashing on and off by itself and goes tto the power off slide message. How do I fix this?

My ipod keeps flashing on and off by itself and goes to the power off slide screen. How can I fix this problem?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

My ipod is flashing black and going to the power off screen? Never dropped my ipod, and did not get liquid in it?

I always make sure to take good care of my ipod, I have no warrnety, It has not been 3 years yer, never spilled anyhting on it nor did i drop/crack it. It happened randomly. Why would this happen...I have restored it tow times and yet happens, it flashes black and constanyl taking me to power off botton..
I'm really frustrated and can't afford another one..It was ios 4 something when i bought, bought it in 2010 march

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

On a MAC G4, WITH OS 10.5.8, I DOWNLOADED 3.6.8, BUT I CANNOT INSTALL IT. IT SAYS I DO NOT HAVE SUFFICENT PRIVILEGES. WELL, IT'S MY COMPUTER AND I AM THE ADMINISTRATOR ON IT. HOW DO I FIX THIS PROBLEM SO I CAN INSTALL FIREFOX 3.6.8??

On a MAC G4, WITH OS 10.5.8, I DOWNLOADED 3.6.8, BUT I CANNOT INSTALL IT. IT SAYS I DO NOT HAVE SUFFICENT PRIVILEGES. WELL, IT'S MY COMPUTER AND I AM THE ADMINISTRATOR ON IT. HOW DO I FIX THIS PROBLEM SO I CAN INSTALL FIREFOX 3.6.8??
== I DOWNLOADED UPDATE 3.6.8

Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading...

I'm continuously getting a "connection timeout" on my home network. My iPhone connects without a problem, and I know the password is correct. How do I fix this?

I've never had a problem connecting to my home network until recently. The desktop computer is connected, and my iphone connects as well. It is not a problem with the wireless router, but rather I believe with my computer or airport. How can I fix this?

https://support.mozilla.org/en-US/kb/ask-tb#w_how-to-ask-your-question

When I turn on or restart my Macbook Pro Retina 15", my entire screen flashes completely bright yellow for a few seconds and then it goes to the normal Welcome screen. How do I fix this??

Hi Everyone,
This problem just started today. When I turn on or restart my Macbook Pro Retina 15" (Mid 2012 version), my screen is light gray like normal, and then after a few seconds my entire screen flashes completely bright yellow for a few seconds, and then it goes to the normal Welcome screen (where I choose to login as myself or a guest user). This suddenly started today and has not stopped since. This keeps happening every single time I turn on or restart my computer.
Yesterday I installed all the Mavericks and other updates that were available in the App Store, so I'm wondering if this is related to that since this never happened prior to my doing those updates yesterday. When I first installed the new OS X Mavericks (10.9.3) update, it went through the whole installation process (took about 10 minutes), and then during the installation I got an error message saying that it couldn't verify my iTunes application that was on my laptop, and then my laptop finished installing the updates. Then once my laptop restarted, the App Store "Updates" section said that I had to do the whole OS X Mavericks (10.9.3) and iTunes (Version 11.2) updates all over again. So my laptop did the whole installation again (took about 10 minutes, but this time I didn't get that "iTunes error message" during the installation process).
Now, when I go to the App Store "Updates" section, it says the following under "Updates Installed in the Last 30 days":
-Digital Camera RAW Compatibility Update (Version 5.05) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-Security Update 2014-002 (Version 1.0) installed April 22, 2014
I'm wondering if this flashing bright yellow screen upon bootup is related to the fact that my laptop installed the OS X Update and the iTunes Update two times each? Or is this new problem totally unrelated? It's just that this problem started a day after these 2 updates were installed twice.
My Macbook Pro Retina 15" (Mid 2012 version) is otherwise working fine at least as of now. The only issue so far is this flashing bright yellow screen every time I turn on or restart my computer.
If anyone could please help me fix this so that my bootup screen doesn't flash completely bright yellow anymore, I would be forever grateful!
Thank you so much for reading this and for any help you can provide.
hope everyone is well,
Elaine

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

I have an ipod classic (7th generation, i believe) that i am trying to repair for a friend that has become corrupted, but when plugged in goes from corrupted to an error message. how do i fix this?

my friend was recently in a car crash, and since then, he's ipod classic (180gb, 7th generation i think) has been on the fritz. from what he has told me, when plugged in, it says it is corrpted, but then it goes to an error (which i cannot identify right now).any solutions, or do i need to come back with more info?

Well the iPod is supposed to be synced from YOUR iTunes music library, if you used other means to put music on there then the iPod is going to sync to only what's on your itunes music library when you connect it.
You need to put the files into itunes.
Far as your other issues, sounds like the drive is dying.
Check this support article for assistance
https://support.apple.com/kb/TS2380
http://reviews.cnet.com/8301-13727_7-10329819-263.html
search online for that number.

My music is backed up on external drive when i disconnect the external drive itunes cannot locate the files on the PC harddrive and none of the music can be accessed how do i fix this?

My harddrive was wiped clean. I upgraded operating system to fr vista to win 7. All music was saved on an external hard drive and i have copied this to itunes on new operating system but itunes can not access any of the music without the external drive being connected. error msg says original files cannot be located. What to do?

It all depends a bit on how & what you backed up, and how you restored it. Select an affected track. Press CTRL-I to Get Info. Click Cancel when asked to locate the file. Look at the location given on the summary tab. Now look through your computer for file in question. What are the two paths? iTunes could be using the wrong layout (pre or post iTunes 9) in error. Or your library could have been split on the previous system, and not restored to preciesly the same path. Posting back the two paths should make things clearer.
tt2

HT5622 Hello. I'm getting a message about "You need to turn on synchronization in isync preferences before you can sync contacts and calendars" after the last itunes update. How do you fix this?

How do you fix the synchronization issue with the latest update? My phone does not sync with itunes anymore.

I have same prob as Mizz Gibbs.
itunes = 11.1.3.8
OS = Win 7 Home Preimum Service Pack 1 (with latest updates applied)
thx for any help you can offer ...

My ipod keeps flashing on and off

My IPOD keeps flashing on and off how do i fix it

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My ipod won't let me connect to wi-fi, won't let me restore or reset it, and it keeps telling me i knew a passcode for any one and I never set a password up. How do I fix this?

My ipod won't let me connect to wi-fi, won't let me restore or reset it, and it keeps telling me i knew a passcode for any one and I never set a password up. How do I fix this? Says try again in 6180146 min. my passcode setting is off, but restrictions are on. Very frustrated. please help

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I downloaded new os for my daughter's ipod touch. I remember during setup after that I checked off my husband's email account and now she is receiving his texts. How do I fix this. The "icloud"/ "messages" buttons are both greyed out under settings

I downloaded new os for my daughter's ipod touch. I remember during setup after that I checked off my husband's email account and now she is receiving his texts. How do I fix this. The "icloud"/ "messages" buttons are both greyed out under settings

Forgotten RESTRICTIONS Passcode
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
- Restore to factory settings/new iPod.
- If you are up to file manipulation see:
How to reset forgotten Restrictions...: Apple Support Communities

Ok, my former computer crashed and i have a new one. i would like to sync my ipod with the new one, but it wont allow me to with out removing all of the data on it. How can i fix this?

ok, my former computer crashed and i have a new one. i would like to sync my ipod with the new one, but it wont allow me to with out removing all of the data on it. How can i fix this?

See Recover your iTunes library from your iPod or iOS device.
tt2

In Preview, when I add text annotations to my PDF (lecture note slides), they look fine until I close it and reopen it, and then they are rotated 90 degrees. How do I fix this and keep it from happening again?

In Preview, when I add text annotations to my PDF (lecture note slides), they look fine until I close it and reopen it, and then they are rotated 90 degrees. How do I fix this and keep it from happening again?

I have the same problem with lectures slides.
Furthermore, sometimes the text box, when doube-clicking, turns the text into a one-liner. Causing the text box to sometimes get 3. times wider than the pdf itself.
tcrother wrote:
... then when it rotates the text isn't visible and I'm stuck clicking on random parts of my lecture slides hoping the text box will come back. ...
By pressing [cmd + I] the Inspector opens up and clicking on the rightmost tab 'Annotations' you should be able find those Annotations again. I do this regularly to find the empty annotations I accidentally create while clicking through slides.

Does anyone know why my iphone keeps switching all of my alert tones and ringtones assigned to contacts? i restored it and it still keeps doing it and now when ever i get a txt or a phone call the tones just sound terrible. how do i fix this?

does anyone know why my iphone keeps switching all of my alert tones and ringtones assigned to contacts? i restored it and it still keeps doing it and now when ever i get a txt or a phone call the tones just sound terrible. how do i fix this?

Your only chance is setting it up as new device without using the latest backup afterwards, which you already did.
If this does not work, you should get it serviced:
Apple - Support - Service Answer Center
How to back up your data and set up as a new device

When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

FRANK M
What computer operating system is your Premiere Elements 9 running on? I will assume Windows 7, 8, or 8.1 64 bit for now.
As for the Help Menu/Update way for updating, are you doing that with antivirus and firewall(s) disabled? If not, please do so.
Do you have the 9.0.1 Update of the program installed? What version of Camera Raw do you have installed?
Premiere Elements 9 is an older program where you can still do manual installs for that one and only Update. And, Camera Raw for 9 is no longer being updated.
For the 9.0.1 Update
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4929
Camera Raw (last update possible for 9) is 6.5
Camera Raw-compatible Adobe applications
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.5 update
Please review and consider the above, and then let us know the outcome.
Thank you.
ATR

My ipod keeps flashing on and off by itself and goes tto the power off slide message. How do I fix this?

Similar Messages

Maybe you are looking for