My ipod keeps on saying ipod is disabled connect to itunes and when i connect it to itunes it says i have to inter a passcode on the ipod to connect to itunes
my ipod keeps on saying ipod is dissabled connect to itunes and whin i connect it to itunes it says i have to inter a passcode on the ipod to connect to itunes what do i do??
hi, may i know how to restore and put it on recovery mode??
as I faced the same problem as you now...
Thanks
Similar Messages
-
So recently I synced my iPod Classic 160 GB like I did so many times and when I wanted to play some music afterwards it couldn’t find any files on the iPod anymore. However when you look in the settings it displays that ~roughly 90 GB free space is available. Seen the fact that I had about 60 gigs of music this doesn’t seem like a coincidence and I think my music is still somewhere on the ipod but the HDD isn’t recognizing it anymore.
I’ve tried resetting it, and resetting it to factory settings, which didn’t work. When connected to a desktop it won’t be recognized by iTunes, it displays an error message that the iPod cannot be read and that I have to reset it to factory settings.
I’ve spent some time researching this problem yesterday and I ran into a myriad of vaguely similar problems didn’t really offer any help. Currently I’m thinking that formatting the iPod might work, and restoring the software afterwards. However this is a rather bold strategy so I’d like to consult you here first.
Thanks in advance!Hi turingtest2,
Thank you for the info, with formatting my iPod I managed to connect it to iTunes again.
However..in the page you linked to there is a section about how transferring large amounts of data can dump your library. That seems to be the problem in this case. It won't even allow me to transfer more than 2 gigabytes of music per sync, if I go higher it will dump everything again. Having over >60 GB of music in my library, this is disastrous to say the least.
Do you think that there is any other solution besides the method you mentioned involving Smart Playlists? -
When I was updating my ipod touch 4g 8g 4.3.3 the USB came out and now it just shows connect to itunes and when i try to update it comes with error 6. I do all of the help things and nothing happoned
First see if placing the iPod in Recovery Mode will allow a restore.
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem. -
I updated itunes and when i tried to open it, it says it cant because it's still updating, but then in the updates it says it's already finished?
does that make it easier, it shows that it has already updated, i don't know how i could see if its just the library updating, when i can't open the app.
-
I just downloaded itunes, and when i go to music there are two options. You can either go to the itunes store or scan for media, and when I click on scan for media it does nothing. Help? (I tried deleting itunes and re-installing it but apparently itunes was still on my computer so it asked me if I wanted to just check and see if there were any issues or missing software, so I did that but i still had the same problem.)
Hi jbserious,
Welcome to the Support Communities!
It doesn't sound like the iTunes software and its components installed completely. The article below will walk you through some troubleshooting steps. Is this your first time using iTunes, or do you have an iTunes library from another computer that you want to move to this one?
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Adding music and other content to iTunes
http://support.apple.com/kb/HT1473
Cheers,
- Judy -
I'm trying to rip a CD to iTunes and am getting an error message that I don't have privileges to make changes to the song. Suggestions on how to fix the problem?
Hey mprangle,
Thanks for the question. The following resources may help to resolve your issue:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks,
Matt M. -
hi i am interested in how to buy an app in app store if i dont have us credit card. when i try to buy an app it says to fill in billing information and when i fill my card specs. it says that its incorrect. so what can i do to buy an app? plz help really important cant buy anything : (
p.s. sorry for bad englishIf you are not in the US with a US billing address and payment method then you can't buy items from the US store - you need to be in a country to use its store.
Does your credit card work with your own country's store ? For it have a chance of being accepted the credit card then needs to be registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, and to have been issued by a bank in the country where you and your iTunes account are.
What's the actual error message that you are getting ? -
hello when i was in the midddle of an ios7 downlad and it was almost done and my itunes just stopped and whn i plugged my phone back in it said connect to itunes and htne i plugged it in and it said error
Resolve specific iTunes update and restore errors - Support - Apple
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore. -
I downloaded a Movie from iTunes via the Cloud as opposed to direct via the store. Now even though it is displayed in movies it won't load. It does not show up on my iTunes Account but rather through the Movies menu.
I received a similar error message. See solution here,
http://riedoh.blogspot.com/2014/05/there-has-been-error-while-loading-form.html
Overview:
As a solution / workaround I had to configure IIS,
Change the application pool identity to an Admin User
Update the Basic setting of the site to use "Application user (pass-through authentication)" as the Path Credentials -
Why does the screen turn black? I was using it normally and it all of a sudden faded to black and hasnt come back on since yesterday. You can see the back light but no image on the screen. Ive plugged it in and it vibrates that its connected but still the screen stays black. I left it alone while I slept and tried again in the morning but still nothing.
So weird mine is doing the same thing. I didnt drop it or anything. I was texting and it suddenly went white and then turned black. It says its plugged into itunes but the screen comntinues to stay black.
-
iTunes quits when I'm trying to open it. I have installed the latest version and another user on the same Mac can use their iTunes when they log in. I have tried deleting iTunes and re-installing but it still won't open. Any ideas? Thanks.
Hold down the option key while starting iTunes and make an new library. Will it open then? If so, you have a bad library. With the new library import the library.xml version of the file in your iTunes folder. This will make it 90% like before (some metadata are not identical, but I don't know which ones).
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451 -
I have followed the steps provided by apple to restore an iPod touch. It is disabled due to having the wrong password entered too many times. When I get part way through the restore process on my computer it pops up a box saying that it can't restore until I enter the passcode into the iPod. I have tried this same process over 5 times now and keep gutting the same results. It is my kids iPod and he has only had it since September. Someone please help me before I throw the thing through the window and my kid strangles me!!! Thanks!
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Ok so i have this iPod touch (3rd gen) and i'm trying to update it through iTunes and when i click check for update it keeps saying this version of iPod software (2.2.1) is your current version. what do i do? how do i update it?
You have a 1st generation iPod Touch. It can not be upgraded beyond iOS 3.1.3, it is available at the link below.
http://support.apple.com/kb/HT2052 -
My iPod touch screen says it is disabled. Connect to iTunes. When I connect the device to the computer a window pops up and said that the iPod is locked and I need to enter the passcode on the iPod..... I can't get it to do anything. Any ideas?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Hi How do I reset my ipod touch when it says "disabled connect to itunes" and when I connect to itunes it can't find the itouch?
http://support.apple.com/kb/TS1369
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.
Maybe you are looking for
-
Does anyone know a fix for being unable to 'place' in Illustrator cs5?
I have been using CS5 Illustrator for over a year now and have had no problems until yesterday when I opened illustrator and was unable to place any images. I can click on 'place' and go find the file, it appears to go through the right process then
-
Workflow history report best practice
Hi. How do you recommend to make custom workflow history report(s)? For example, let's think of the most simple document approval process: initiator uploaded document, manager reviews the document, if approved - document is marked as approved, if not
-
SRM-SUS RFC Destinations for matching of user data.
Hi, A customizing question... I get SRM and SUS in separated boxes... SRM is with all the SAP landscape (R/3, XI, MDM, etc..) and <b>SUS in the DMZ</b> to allow vendors to reach the web site.... So, there's an activity to setup the connection to repl
-
My IPAD 2 is locked in the portrait mode I am unable to unlock it what do I do?
My IPad is locked in the portrait mode. All of the Icons are upside down (at the home buttton). OS is 5.0.1. I can see a half circle with a lock in it.I have tried to double click this loc and nothing happens. Under the Lock Rotation the side swit
-
I have a five year old iMac. I upgraded to Mtn Lion; then iPhoto 9.3.2. Something ate my albums. I have tried restoring via Time Machine. I can find iPhoto at an earlier date OK, but when I restore iPhoto, I just end up with the current version wi