My ipod keeps resetting itself when i plug it in to the computer, now what?

Basically, I plugged my ipod into my laptop as usual and itunes sprang up with an error message that i can't quite remember. I just remember that it mentioned a file corruption and that i should either restore the ipod settings or i should disconnect and reconnect it. I reconnected it and got the same result, then tried again. This time iTunes didn't recognise it all and within a minute of being connected my ipod reset itself. The laptop registers it, but my ipod just keeps resetting itself and i don't know what to do. I've tried resetting it and restoring default settings, so what more can i do or is a repair the only option?

Follow the steps mentioned in this article to disable the camera notification: http://support.apple.com/kb/TS1501 , then try again to connect to iTunes.

Similar Messages

  • Ipod constantly resetting itself when plugged into Itunes.

    My new 5G 80gig Ipod constantly resets itself when I plug it into Itunes. Any ideas? The Ipod is new...

    Here's what I've done so far unsuccessfully:
    Placed it into disk mode, but it does the same thing. Once plugged into the computer the ipod is recognized by both windows and Itunes but it resets itself within 30 seconds. It constantly keeps resetting itself.
    Also, since it keeps resetting itself, and therefore disappears form itunes, I cannot reformat/hardreset it via Itunes....

  • My ipod keeps shutting off when I plug in to computer and try to sync to itunes.  what can I do to fix?

    my ipod keeps shutting off when I plug it in to my computer to sync with itunes.  how do I fix this?

    With the iPod still connected, try resetting it by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • Ipod keeps reseting itself

    so after i had the trouble with my ipod last week and ended up replacing it at the apple store for a small fee of $32.05, this new ipod is giving me more problems.
    so this new ipod keeps reseting itself. for example, i connected it to my computer and the "do not disconnect" sign won't come off and it's not connecting to itunes. so i reset the ipod. it finally connected and then i ejected the ipod no problem. so then from now on, it resets itself, leading me to restore the ipod. so i restored it, and the problem still occured. and then i reset it again and now it's working fine.
    in conclusion, does anyone have some suggestions/comments/idea for this situation?

    that's EXACTLY what is happening to me. i plan to go back to the apple store very soon because i've run out of ideas as to what to do to solve this dilemma. i'm glad though i'm not the only one with this problem although i am sorry you have the problem too lol.

  • IPod keeps reseting itself while updating

    I've had previous trouble with my 60GB iPod Video, but I think this is the last problem... I am trying to update my iPod but while its updating the iPod keeps reseting itself over and over again... please help!!!

    There's nothing you can do but bring it back to the store. Mine does the same thing, it just goes to show that Apple is so busy pushing these new iPods on us and releasing them too soon that the customers end up having to deal with their hardware failures---all because they didn't take the time to test these!!!
    PowerMac G5 2.3 GHZ   Mac OS X (10.4.3)  

  • My ipod stays at the apple logo whenever i try to turn it on and Itunes doesn't recognize it when i plug it in to the laptop. What do i do?

    My ipod stays at the apple logo whenever i try to turn it on and Itunes doesn't recognize it when i plug it in to the laptop. What do i do?

    Try This...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy...
    Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • When I plug my iphone into the computer to restore it I receive a "network connection timed out" message. However, all of our other iphones and ipod touches will connect fine.

    When I plug my iphone into the computer to restore it I receive a "network connection timed out" message.  However, when I plug in other iphones or ipod touches I can connect fine.  Any help would be appreciated.

    Try a powered external USB hub.  It uses a 120V AC wall jack to power USB devices, and the Mac only needs to provide *just enough* to comminucate.  Best Buy, Target, Walmart, ... about $20.

  • My ipod wont charge ive try everthing when i plug it in to the computer nothing happen but before that it was full charge and 5 mins after that it was 10% and tried charging it nothing but now the screen is blank...So what should i do?

    My ipod wont charge ive try everthing when i plug it in to the computer nothing happen but before that it was full charge and 5 mins after that it was 10% and tried charging it nothing but now the screen is blank...So what should i do?

    - See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HT1535 When I plug my ipad into the computer to sync a message pops up saying it can not sync because there is not enough memory in the itunes library. Do I need to increase the memory in my itunes library and how?

    When I plug my ipad into the computer to sync a message pops up saying that the ipad can not sync because there is not enough memory on the itunes library. Do I need to increase the itunes library memory and how do I do this, or do I just need to trasnfer things out of itunes? Thanks.

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • When I plugged my iphone into the computer for the first time I lost all of my music and my ringtones. Is there a way to get them back without buying them back?

    When I plugged my iphone into the computer for the first time i lost all my music and ringtones. Is there a way to get them back without buying them again, or will I have to buy them again.

    Download the free app My Contacts Backup and use it to back up the contacts on your device now (it will back them up as an attachment to an email that you send to yourself).  Then restore your device to your most recent backup to see if it will recover your contacts.  If not, if necessary you can open the email and tap the attachment to re-import the contacts you have now back to your device.
    If you need to restore to an iCloud backup this has to be done in the initial setup process, which requires you to first erase your device.  If you have any more recent data on your device now that is not in the backup that you want to save you'll need to do that first.  Then go to Settings>General>Reset and tap Erase All Content and Settings.  You will then go through the setup screens on your device, and when given the option, choose Restore from iCloud Backup (see image below).  Be sure you are connected to wifi and your charger as this will take some time to finish.

  • HT4061 the screen is blank and the phone does not respond even after pressing the on/off and home button. the only reaction is the vibration felt when I plug in to charge the phone. What should I do?

    The screen of my iphone 4 is blank and the phone does not respond even after pressing the on/off and home button, the only reaction is the vibration felt when I plug in to charge the phone. What should I do?

    This is the ipod touch forum

  • HT1386 i downloaded the new version of itunes. when i plug my phone into the computer to connect its saying my device is synced with another itunes library. how do i get my old itunes back? or how can i get my old itunes stuff to the new one?

    I downloaded the new version of itunes and when i plug my phone into the computer and try and do something in itunes it wont let me because my device is synced to another itunes library. how do i get my old itunes back? or how can i sync my stuff into the new itunes with out deleting anything off my phone? HELP

    Copy the iTunes folder from the old computer to your new one.

  • I updated to 7.1 and now when I plug my phone into the computer, it says there are no pictures??????

    I updated to 7.1 and now when I plug my phone into the computer, it says there are no pictures??????  When I have 500 pictures on it!!!!!  Im soooooo mad I did the update! Worst decision ever!!!!!!!!!!   I am SOOOO ready to leave the IPHONE alone- maybe throw it in the river or lay it on the train tracks.   Its been NOTHING BUT TROUBLE since the update!

    Just to be clear: Tap on the Photos app to start the app. Then tap on Albums at the bottom of the screen. You might have several albums but only one is named "Camera Roll." Are there photos in that album?
    If there are NO photos in the Camera Roll album there are no pictures to import. The remaining albums might have come from a sync with your computer or they might be your PhotoStream.
    If there ARE photos in the Camera Roll album, connect your iPhone to your computer and start your camera application on the computer. Your phone should be recognized as a camera.

  • My itunes doesn't want to open neither when i plug my iphone to the computer

    my itunes dosen't want to open neither when i plug my iphone to the computer !!!
    what should i do

    Hi bae go,
    Thanks for visiting Apple Support Communities.
    If your iPhone is not recognized by iTunes, start with the troubleshooting steps in this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If your iPhone appears in iTunes but is not responding, try these steps first:
    iOS: Troubleshooting USB-related alerts when syncing
    http://support.apple.com/kb/TS5254
    Best,
    Jeremy

  • HT1766 I have the latest version of iTunes. When I plug my iPhone into the computer, it never comes up under the "Devices" tab in iTunes.  How can I perform a restore/backup if it won't come up under "Devices" ?

    I have the latest version of iTunes. When I plug my iPhone into the computer, it never comes up under the "Devices" tab in iTunes.  How can I perform a restore/backup if it won't come up under "Devices" ?

    See:
    iPhone not recognized in iTunes for Mac
    iPhone not recognized in iTunes for Windows

Maybe you are looking for

  • Ringtone has stopped

    My Iphone 3G was recently exposed to water.  Most sounds work except ringtone,alerts and games.  Alarm clock and pandora work.  I have tried putting headphones in and out.  Shutting down completely. Nothing seems to be bringing back ringtone.

  • Problem downloading itunes v11

    after completing downloading the itune v11, a window appears saying : "The file "itunes library.itl" cannot be read because it was created by a newer version of itunes. I do not understand & tried uninstalled & reinstalled itunes v11 many times but t

  • How to get description from the field name

    Hello fellow SAP Fanatics, I am trying to find an easy way to get the description of a field if I know the technical name. I know I can view them in tables but is there one place where I can just look up the field and get the description? Thanks.

  • Suppressing NuLL values in Crystal Report

    Hi.... I m facing a problem,i use asp.net and  I have designed a Crystal Report.I had to place Text Objects in the the details section along with the corresponding Records from Database as per the Reports Design needed. Now i want that the NULL value

  • Cannot download and install Flash Player tried numerous times and it says installed

    Adobe Flash Player / Version: 11.9.900.117 Laptop running Windows 32-bit XP / English M.S.I.E.