My ipod keeps restarting it doesnt show the apple logo just the spinning thing it does it then lets me tyoe in my password then does it again helppp please

its jail broken too if that matters

Try forcing it into recovery mode,  http://support.apple.com/kb/HT1808?viewlocale=en_US

Similar Messages

  • Have an iPod touch 4th gen.  It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing.  I have restored via iTunes and reset all the settings.  Any suggestions?

    Have an iPod touch 4th gen.  It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing.  I have restored via iTunes and reset all the settings.  Any suggestions?

    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • HT201263 I tried to update software on my i phone 4s and the phone will not restart past the apple logo? The logo keeps flashing up but wont go further.. please help!

    I tried to update software on my i phone 4s and the phone will not restart past the apple logo? The logo keeps flashing up but wont go further.. please help!

    Place the phone in recovery or DFU mode (search Google) and restore.

  • MacBook won't boot - stuck showing the Apple logo and the spinning circle.

    Hi.
    My MacBook suddenly froze when I was using it today. Displaying the spinning beach ball.
    It never came out of it, fan running at max speed, so I tried to force restart it (Control-Command-Power), but that didn't work, so I forced the MacBook off (holding the power button pressed.)
    When trying to start the MacBook again it couldn't boot. It kept displaying the grey screen, with the Apple logo and the spinning circle below the Apple logo.
    I left the MacBook like this for 10-15 minutes, but nothing happened.
    Went on to try the following.:
    *- Removed the AC-adapter and battery for 5 minutes.*
    *- Command-Option-P-R (Resetting PRAM and NVRAM).*
    *- Resetting System Management Controller (SMC).*
    *- Command-S (singleuser boot)*
    And checking the HDD with sbin/fsck -fy
    = "The volume ** appears to be OK."
    *- Command-V*
    Stops on the following line, and fan ramps up to full speed.:
    DNSServiceRegister("ssh.tcp."): -65537)
    Force reboot didn't work. Had to force it off.
    But, nothing helped.
    It simply won't boot.
    I also tried to boot Ubuntu 7.10, but it hangs after a short while displaying "Kernel panic".
    Force reboot didn't work. Had to force it off.
    Also tried the option to boot from the first HDD (in the boot menu on the Ubuntu 7.10 disc), but that didn't work either. Only got a black screen, with a blinking cursor top left, and fan ramping up to max.
    Again, force reboot didn't work. Had to force it off.
    The only thing that has worked so far is exiting the Ubuntu 7.10 CD boot menu, and pressing enter on the prompt that appears.
    But, after rebooting, the MacBook still refuses to boot into Mac OS X.
    I left the MacBook alone, hoping it would work its way out of the spinning circle, but after 2 h 38 min nothing had happened.
    Does anyone know how to fix this?
    :. nattugglan

    This happened to me last night.
    I was updating my iPod and I got a message saying that it needed to do an update. I installed the update and went on ahead putting new songs on my iPod. When it was finished i ejected as I usually do and closed down.
    When I went to check me e-mails this morning the Macbook would not boot. It sticks on the grey screen with the Apple and the spinny disc underneath, then it restarts and sticks on the same screen. The last software to be onstalled was Norton 11 on Monday but I have used the Macbook since. I cannot think why it will not boot.
    I am loathed to do a reinstall as I have some things on the Macbook that I had not yet backed up.
    Any advice?

  • Ipod nano 4th generation switches between the Apple logo and the menu

    I have a 4th generation 8 g iPod Nano that probably has about 1 hour of use since my wife won it in a raffle over a year ago. When I went to recharge it yesterday, the only thing that happens is that the display, when connected to the computer, flips back and forth between the Apple logo and the menu screen. Whenever either one of them appears, it will disappear in a few seconds, then repeat the sequence. I have done a reset and restore,and installed the latest software version but the same thing happens over and over again. If the iPod is detached from the computer, ie, its power source, NOTHING happens on the display. It black and you can't get it to show anything. My theory was that the battery needed to be replaced even though it wasn't used much in the year since she got it. In fact. the absence of use and recharging it and discharging it may have lead to this problem in the first place. However, my one issue with that theory is that, when connected to a power source, like the computer, I would think I could get it to function normally, which I can't. I was able to get to the "service menu" which won't disappear when I move about different choices, as long as its connected to the computer. Again I can get nothing if its not connected to a power source.. does anyone think that this problem could be solved by replacing the battery or does it seem like that is only part of the problem? Thanks for any help and suggestions you may have to offer.
    Geoff

    Despite the Nano only being used for an hour or so, the battery needed to be replaced= problem solved!!

  • I've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?

    i've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?

    Look at this support article:
    http://support.apple.com/kb/ts2570
    Ciao.

  • I inadvertedly changed a setting where the top of my screen no longer shows the apple logo in the top left or the clock and wifi status and strength on the top of the screen, how can I get it to show both of these things again like it used to?

    I inadvertedly must have changed a setting where the apple logo and files and things that used to be in the top left corner of the screen are no longer there as the clock and wifi status and other installed settings used to show up in the top right hand corner of my screen.  When I move my mouse to the very top of the screen they drop down but when I move my arrow away from the very top of the screen they both disappear again.  So I was wondering how can I get it to revert back to the way it used to be?  I hope this isnt confusing.

    I tried the zoom thing but it still didnt resolve my issue   Im gonna try to clarify my issue a little bit more, before the change, my screen when I would surf the web would have the apple logo and safari and file and edit and view buttons at the top left hand of the screen and the upper right hand screen would have the time and the wifi strength and my name and the spotlight box and a volume control but now they dont show while Im browsing the web unless I take my arrow and move it to the very top of the screen then those boxes will drop down like it used to be but when I take my arrow and move it from the top of the screen it disappears again and ll I get is a back and forward arrow and the url input bar.  Anyone else have any ideas of what I did to mess this up?

  • My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

    My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

    Hey rulosrojos,
    The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
    iPod nano (6th generation): Hardware troubleshooting
    https://support.apple.com/en-us/TS3474
    Sincerely,
    Allen

  • My Macbook Pro will not shut down, restart or sleep, with either Apple Logo at the top or the power button.

    Hi, I have a 13" Macbook Pro with Mountain Lion, and I've had it for less than six months.
    It has worked perfectly ever since I got it and I have been completely happy with it, until today. My computer's had a variety of problems; The screen has turned black three times now in the middle of me using it (actively typing or using the touch pad). After clicking some keys or swiping the touchpad, it comes back, but I cannot figure out why this is happening. The big problem, however, is that it won't shutdown.
    I usually shut my computer down at night, and I was trying to today, but it just didn't work. I have tried shutting down by pressing the power button; no dialogue or question box comes up. I have tried shutting down from the Apple Logo at the top left of the screen; nothing happened. My computer won't sleep, restart or shutdown at all. When I close the screen, it goes darkens and lights up as usual, but it won't shut down! What's more, none of the options in the Apple Logo will work; for this post, I tried to see the About This Mac screen, and nothing happens. At best, the Rainbow Disc of Pain will appear and then just go away. The menu does pop up though when I click on it, my Wi-Fi is fine, the apps work, the keyboard's fine, the touchpad is great, everything works but that.
    I have tried Command+Tab to see open applications; I have shut them all down till only Finder is left. I have tried click Force Quit, of course, nothing happened. Nothing at all, not even a dialogue box. I have tried emptying my trash, along with all the 'sketchy' applications. I have plugged my computer in, just in case. Nothing has made any difference and I am very worried!
    I love my macbook pro, and have up to this point, but now I am extremely worried about it; all my important files are on it, and I have nothing to back up with.
    Please, please, please, please help!
    FYI; I have avast! Virus Database. I cannot imagine that that would cause a problem. Please help me!!!

    Yay! Solved my own question; just did a hard shutdown, worked like a charm! Funny, didn't before. But who am I to question salvation?

  • My ipad 1 isnt working it is just showing the apple logo on the screen can anyone help me?

    my ipad 1 isnt working it is just showing the apple logo on the screen can anyone help me?
    If you can help me facetime me at [email protected] or msg me.

    It would help to know whether it ever did work, or is this a new iPad for you?  If new, you need to connect it to a Mac/PC that's running iTunes in order to register and initialize it.  If it used to work, try doing a reset.

  • Ipod 5th Gen is stuck on the apple logo with the loading bar not moving

    So I recently decided to restore my iPod 5th gen to factory settings, because I plan on selling it to a friend. When I chose the option to erase all data and reset settings, the iPod turned off, and then came to the black background with the apple logo in the middle. After watching it turn on and off, and not do anything for at least an hour, I searched for answers on the forum. I found that I should reset my iPod by holding the center button and the top right button at the same time for at least ten seconds, or until the device shuts off and then the apple logo is visible again. After I did this, once again, the black background with the apple logo popped up, this time with a loading bar beneath it. After an hour or two of checking on the progress bar, I noticed that it had not made any progress whatsoever. It had not moved an inch since I first started it. What do I do?

    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Was just on my phone as per-usual and then it turned off for a minute, then came back on showing coding at the top with the apple logo in the middle?

    Was just on my phone using snapchat, took a photo and then it turned off for a minute, then came back on showing coding at the top with the apple logo in the middle?

    Graser11 wrote:
    Unfortunately my phone does not even turn on anymore.
    Then try a reset
    If that does not help, then restore the iPhone

  • I was updating my phone to iOs 6 and an error occured on my computer. My phone has been frozen on the apple logo with the loading bar right below it. I cannot restart my phone because my power button doesn't work. HELP!!

    After the error occured, my phone was stuck on the apple logo with the loading bar below it. I cannot restart it because my power button is broken, and it will not be recognized on my iTunes. Any help how i can get my phone off or back to working again?! HELP PLEASE!!!

    Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required...
    Be sure to make an appointment first...

  • After installing the latest update for Mavericks and restarting, my Mac just displays the Apple logo and the spinning wheel. What can I do to fix this?

    I installed the latest update of Mavericks from the App Store today and after restarting my system it doesn't go beyond the Apple logo and the spinning wheel. I tried resetting the NVRAM but it still has the same problem.

    1. Startup in Safe Mode
        http://support.apple.com/kb/PH14204
    2. Repair Disk.
        Steps 1 through 7
        http://support.apple.com/kb/PH5836

  • HT200150 I pressed the find my iphone delete button and then my phone showed the apply logo. I then got worried and turned it straight off and now it will not turn back on. The apple logo just comes up for about 10 seconds and it goes back off.

    I pressed the find my iphone delete button and then my phone showed the apply logo. I then got worried and turned it straight off and now it will not turn back on. The apple logo just comes up for about 10 seconds and it goes back off.

    Connect your phone to itunes on the computer you use itunes on and open up itunes.

Maybe you are looking for

  • 'iTunes Software Licence Agreement' every time I open iTunes

    Since the most recent iTunes update, I'm getting the 'iTunes Software Licence Agreement' window every time I open iTunes (screenshot - http://img508.imageshack.us/img508/5265/68707078.png) -- to which I have to select 'agree' to access normally. Why?

  • Help needed in Exporting tables data through SQL query

    Hi All, I need to write a shell script(ksh) to take some of the tables data backup. The tables list is not static, and those are selecting through dynamic sql query. Can any body tell help me how to write the export command to export tables which are

  • Select lists, Static Assignment Computations

    Hi, I'm using ApEx 4.0.1 on Windows XP Pro SP3. I need to set items default values when the page loads. So I created "Before Header" computations for each item (static assignment). When I run the page, the default values are set, but for select lists

  • L_TO_CONFIRM  - Exception

    Hi gurus. I´m trying to confirm a TO using the function L_TO_CONFIRM , but I´m getting the exception 10 (ITEM_NO_SU_BULK_STORAGE). However, I can confirm the same TO, using the transaction LT12 without any problem. I have tried a lot of differents th

  • Status Code: 404 Not Found

    Hi, I have created simple REST Full services. It would validate the data and send it into a Queue. I have added a REST Client add-on's to my Mozilla browser . I got the following error when i test the rest full web services through Rest client . Stat