My ipod keeps showing the apple logo on and off after i updated it?
my ipod keeps showing the apple logo on and off after i updated it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
Last night I turned my iPod touch 4g off randomly and then when I went to turn it back on and went to unlock the screen it froze up right there and will not unlock to the home screen to where all my apps and all that are. Ever since that happened the iPod keeps showing the apple logo repeatedly, as well as a screen being completely blank when still turned on. Also when i plug in the iPod to the computer it recognizes it for a second but the iPod does nothing and shuts off and repeats in showing the apple logo and blank black screen. I can get it to the home screen where the slide to lock button is but every time i even attempt to slide it, it freezes up and doesn't do it.
I also having been trying to restore it by plugging in the cord and pressing the home button to get the screen with the usb cord to pop up but no matter what i do, it will not let me turn the iPod off period because every time i keep trying to do that it just shows the apple logo and all of what i said up above again. I have also seen it get a white screen to show a few times , which i assume means the white screen of death. I have never seen that screen before this happened.
I know this is not making any sense whatsoever but this is very hard to put into words in explaining. I have searched the internet but i can't find a single problem that sounds like this one in solving to fix it. The iPod is on right now as i'm typing this. I haven't attemtped to push the buttons down again to fix as i would assume maybe to just leave it alone as i sleep through the night in hopes of it maybe working or even dying. I've only had this iPod for 4 months now and i just don't understand why it won't let me turn it off completely or work properly for me to restore it.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod keeps showing the apple symbol then shuts off.
my ipod keeps showing the apple symbol then shuts off.
Please tell me that it has NEVER been jailbroke. If it has never been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this. -
I just downloaded the software 6.1.3 on my i phone, 1 hour passed and it still didn't turn on. It just shows the apple logo on and off.
http://support.apple.com/kb/HT1808
-
My ipod touch 3 is blinking the apple logo on and off when i updated it to 6.1.5
i tried to update my sisters ipod touch 3 to ios 6.1.5, and now its blinking the apple logo on and off. is this nomal for updating?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
After the ios 7.1 update my iphone 4 will not turn on. its stuck showing the apple logo off and on. Id really like to fix it with out restoring it because i have not backed up my data on my computer. Can anyone give me some ideas on how to fix it with restoring if possible??
Try a reset, hold the sleep/wake and home buttons together until you see the Apple logo. If you cannot get the device to reboot for you to see your content, you will have to try to restore it via iTunes. See this support document for help with that.http://support.apple.com/kb/ht1808
You may not be able to back it up if you cannot get it to stay on. -
hello there, i don't have windows operating system on my computer, i have a system called ubuntu,so there for i can't download itunes. i have a music app,called banshee on my computer,and have been using it successfully.i managed to put my music from my computer to my ipod but al of a sudden it's not working and iv'e lost all my music.also my ipod seems to keep resetting its self because the apple logo keeps showing i'm afraid i'm not very good with tecnology i remember going to my ipod on a disc management app and pressing benchmark not to sure what i did i think i nrrd to reinstall yhe softwear on my ipod but the apple home page keeps telling me to download the lates itunes,but as i have stated this is not possible.can anyone please help me?.ps out of intress i have another iopod the same model can i transfer the settings from one to the other.regards mr france
Sorry, I can only advice that you go to ubuntu ipod forum, for a better response.
Here I can suggest install iTunes and Restore the iPod. -
when i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you
hi
... i have a similar problem
but just with the sleep botton.
fist use your adapter with other iphone/itouch ... is posible itś the problem
second .. let your phone charging
...normally if we conect our phone ... after some minuts it's put on.
after 2 hours ... trate to use it ... if after it your phone continue same... could be qaa electrical/physic problem
please if you have a guaranty use it.
im sorry but my english is terrible. -
Please help me!My Ipod only show the Apple Logo :(
Yesterday,when i use my Ipod,i was reset it,but when the logo Apple show again,it can not go to the Menu so i was plug it to AC Adapter and put it into Disk Mode but when i plug it to my PC ,the Ipod was show the Apple Logo(not in disk mode)So what i need do to restore my IPOD????Please help me!:(
have you tried this
http://docs.info.apple.com/article.html?artnum=61584 -
Trying to update to iOS 8 and the phone keeps showing the Apple logo, then dimming after a number of minutes then showing it again.
Hello cgb1508,
Thanks for using Apple Support Communities.
From your post I understand that your iPhone will not boot past the Apple logo. To troubleshoot this issue please follow the steps in the support article below.
iOS: Not responding or does not turn on
Take care,
Alex H. -
I have an iPad 2nd generation and all it does is show the apple logo continuously and nothing else. I cannot get into the iPad and I have tried to restore it numerous times but it comes up with error 19 or error 14. Or it restores but after it has it just comes back up with the apple logo once again and nothing changes or it flashes a few times. does anyone know how to fix this?
Cheers MegYou need to put your iPad into Recovery Mode. Follow the instructions in this Apple support document very carefully. It might take several attempts to get it to work.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
I accepted an IOS update on my phone this morning, now it keep flashing the apple logo intermittently and i can't access my phone at all. I can't make or recieve calls or texts at all. What do i do to rectify this please?
You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer. -
My iPad air would not start. Only show the apple logo then no reaction after that.
My iPad air would not start. Only show the apple logo then no reaction after that. This is already the 2nd time. Last time I sent back to the service center and they said it is the system problem and reset the system and charge me for the service because they said it is not a hardware problem. It happened less then 30 days and same problem again. Can someone please send me the hard-reset step so I can try myself before I send back to the service center again? thanks
Here's the hard reset info:
http://www.hard-reset.com/apple-ipad-hard-reset.html
Post something about what happened with your visit. -
IPod Touch - continuously cycles Apple logo on and off - otherwise works
iPod Touch first model, 32 GB. this unit works fine, has latest OS updates and re-sets.
Still, when I turn it off it doesn't sit quietly - it cycles the Apple logo on and off continuously whether on charge or not. No way I've found to have it break the logo on-off cycle - repeats endlessly.
If I hold the "on" button the cycle will stop and the unit will turn on and run fine. When I turn it off the Apple logo (boot up) image begins to cycle (on for several seconds, off for several seconds) - continuously.
This unit has all latest updates, has been re-set, etc. Nothing seems to work to stop this blinking cycle. If not on charge the unit will run down completely. Pls. Helpthanks for your suggestion about using the power and "home" buttons at the same time to reset the unit. I've tried that route also many times with no change in the cycling activity. If I release the home button and hold the power button the Touch will turn on and function as normal. But no reset - restore with my Mac and iTunes, or solo, will stop this up and down cycling. It's right beside me now doing "it's thing."
STILL need help to cease this cycling until the battery either runs down or I place it on charge - at which time the cycling resumes.
Strange thing is that the unit works totally normally with mail, apps, internet, etc. when it's on, and it seems to turn off when asked - but then it starts this "reboot" activity endlessly.
Really will appreciate help with this - local Genius bar guy had no answer - "trade it in" he said. -
My iPhone keeps blinking the apple screen on and off, as though it is turning on, but it goes no further. I've tried the two-button shut down, but nothing is changing. What do I do?
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Maybe you are looking for
-
I'm just tired of waiting on this inept device and it's underserved iTunes counterpart being unable to deliver enough bandwidth to load a show within a reasonable amount of time. I'm a big Apple fan and an equally big critic. This whole rig is a bi
-
Dual-Net : What's it all about???
Hi, Looking at http://www.msi.com.tw/program/products/mainboard/mbd_index.php there's an advert at the top of the page advertising 'dual-net'. Now this looks like a socket 745 or 939 motherboard with something using the comm slot - which apparent
-
Am facing trouble in downloading apps.how i can get rid of that?
can anyone help me to install apps like before..it is not working
-
Is there a way to get "clientId" from an action method?
Actions and action listeners are similar, but there is an important difference. The listener does not return a view for navigation, but an action does not get the ActionEvent parameter, and hence does not have a trivial way to get at the client id th
-
I am having a hard time with the volume of my main menu audio. When I import the track I want to use and drop it in the top menu, I have no way of adjusting the volume. I usually mix all of my audio in final cut to a maximum of -12db. The volume appe