My iPod locks up after using it in the car with the iTrip
I recently upgraded my iTunes software and iPod software to the most recent versions available. Since then, my iPod will work in the car with the iTrip for only a short amount of time and then it starts scrolling through the playlist by itself without playing anything and then gets stuck in the on mode. I have reset the iPod as directed by the Apple website and it worked fine from my computer and in my Bose sound dock. Once I put it back in the car on the iTrip the same thing happened. I am wondering if since my software upgrades the iTrip is not longer compatible with my iPod. Please help! Thanks!
Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Similar Messages
-
My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen
From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
Otherwise, try a hard reset as well. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock -
HT204268; I have purchases on an aol login pre 2008 and all recent stuff under an apple id. I currently see and use everything when i login with the apple id. After March 31st will my apple id account still show and contain all?
I understand the instructions to create a new account id (apple id) from the old aol account. However, does this mean my purchases will be split into 2 accounts; or does the fact that I currently see everything under my apple id (regardless of the purchased by username) mean this will all still appear in my current account as it does now?You see them where when you login your non-AOL account ?
If you currently have two accounts (the AOL username account and an email address account) then you will continue to have two accounts, and nothing should change when you update the AOL account to be an email address (apart from how you access that account).
You will just be renaming the account to have an email address for accessing it, not creating a new account. -
After I upgraded my Iphone 4 with the ios 7.1.1 it locks up while sending text messages. I can usually send a few then will have to restart my phone(often more than once) to get it to send and receive messages again. I have done a back up and complete reset and that has not fixed the problem. Have been told that the ios 7.1.1 just isn't compatible with the Iphone 4 so that's why it is locking up so often, but I am hoping someone else may have a better answer since it can't be undone. Thanks!
7.1.1 is certainly compatible with the iPhone 4. Just try a reset first.
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) -
i bought a new computer. the itunes app allows for home shareing, file transfers, etc.. but i want to discontinue the syncing with the old computer and sync my ipod touch now only on my new system... but i cant seem to disconnect that old relationship at all.. when i try to syncit says that my ipod is already synced with another computer, do i want to discontinue that and only use the new informationon this computer? i dont want to do that yet because it doesnt seem like everything has come over, and i am afraid of losing songs that i downloaded from cds, etc..
if you don't want to sync it because you don't think that everything has been transferred then i would check first if you can, before you commit to used only the data from your new computer.
though, im not sure if this is true, but i think that when you sync your ipod to a new computer it will take the items from your ipod and put it on itunes, like when you purchase something on your ipod and it gets automatically transfered, but don't take my word for it. -
Today when trying to download new songs to my Ipod touch a message popped up stating that my Ipod can not be used because I need to update the software to 10.6.3 and to go www.itunes.com. I cant find where to update my Ipod touch to the version on the website. HELP!!!
I suspect you have a Mac with OSX 10.5.8. If so see:
ios 6 and macosx 10.5 on a pre intel...: Apple Support Communities
Otherwise what OS and version do yo have?
What version of iTunes do you have? -
Ai, 3D effect - after using to either extrude or revolve the settings are retained in my drawing tools - pen, pencil and shapes. Example I draw a 50 pt extruded object in wireframe, isometric view and my pen and all drawing tools will only draw using those settings. I can not exit, help please!
Appearance panel menu > New art has basic appearance.
-
please help i have two ipods but i can use any as i can download the newer version of Itunes as i have the older version of Bonjour on my laptop
I just cannot remove this!!!!!!!!!!!!i am no shure but go on Itunes store in shortcuts and try to find 'purchasse'
good luck -
So, what, I can't charge iPod without a PC - using a wall or car charger?
Hey, hopefully you guys will be more useful than Apple's support line, saying that Apple won't support non-Apple accessories (that is, basically, everything... since Apple didn't even provide a charger with the iPod to begin with). Basically (and even specifically) saying that Apple doesn't recommend using anything but a computer to charge.
That means no charging at work, no charging in the car, no charging whenever it's "convenient"... only charging when iPod is connected to a computer. That's the predicament I'm in now.
If I plug iPod into any device that starts iPod up as a disk device (MSD driver), it'll start charging. If I don't plug it into something that initializes it as a disk (i.e. a 5vdc USB charger), it won't charge. If I plug it into a powered hub without a computer, it doesn't charge. If I plug that same hub into a computer (keep in mind, it's still getting power from the adapter here), guess what? It charges.
What, the crap. Why did Apple do this? Most of the reason I chose to finally buy an iPod (even though I'm plenty happy with my other MP3 players) was because of the plethora of innovative third party add-ons. Now I can't use a charger? What gives?
Or is there really something wrong with my iPod? I've tried several USB chargers that work with my other USB devices (my Pocket PC, my phone, etc), that don't work with iPod. Strangely enough, Google revealed that nobody else seems to be having a similar problem, or if they are, that it's because the USB charger is underpowered (which, while is understandable for my cheesy Chinese USB device chargers, is not the case with the powered hub).
Thoughts?I didn't even know about a video-out spec change (nor do I use video out, I just got my first iPod!)...
Just, what has me ticked is that I can charge any of my other USB-charging devices like my cell phone and PDA, by just providing +5v to the USB port like a powered hub does without a computer, or a cheap Chinese car adapter does. That's how I modified my cell phone's provider-branded data cable to charge the phone via USB - as it stood, it would only provide data through the cable and drain the battery even though the phone was being provided +5v into its USB circuit. I simply soldered a couple wires ("open source" hardware I call it - the connector simply unscrews and has all its contacts exposed to tweak with!). Easy fix.
But what I find with the iPod is that it's the only device that needs to be "forced" to charge even when it has 5 volts sitting right in front of it. Strangely (and sadly), I did a Google on the iPod dock connector and found on the iPod Linux wiki that there actually needs to be a resistor in place between a couple of USB pins in order to force the iPod into "charging" mode when connected to +5v. So basically, yeah, it will charge, but since my hub isn't an iPod charger, and the cheap chargers I have (that only provide USB 5v) don't have that resistor, I guess it was just ignoring it.
Great job leaving the consumer guessing, Apple. At least now there's a forum post on this (irritating) subject for those of us that don't associate "new device" with "new accessories" but instead find ways to make our old accessories work for the new devices. Guess it's to the soldering iron with me...
Message was edited by: Falcon4 -
If i lock my Mac using iCloud "Find My.." with a code, but now i have forgotten the code i used but have my Mac bac. How can i Unlock it????
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad into Recovery Mode
http://support.apple.com/kb/ht1808 -
How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....
Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well. -
When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.
Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions? -
I cannot read or write I have been using the iPad With the accessibility icon Is there a video to help teach me To learn how to use this accessibility more efficiently
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
I have an ipod touch that continues to have a black screen with the white apple on it. It won't shut off and is completely frozen. This happened when we tried to restore it last night. Help please!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
How to use a scaled object(MC) to fill the background with the new properties
So lets say i have a stage 300 to 200 and all object that i have are for this dimensions.Also have an pattern function that fills the background.
But the user is thinking of resizing the stage to lets say 1024 to 480 (he switched from a phone to a tablet).And now the scale of the objects in the tablet screen are more than 3times before(when seen on the Phone)
How do i save the current new size object and use it in the creation of the new background (the 1024x480).
currently i have this :
public static const GAME_ORG_WIDTH:uint = 300;
public static const GAME_ORG_HEIGHT:uint = 200;
public function MainClass_road() {
addEventListener(Event.ADDED, init);
public function init(e:Event):void{
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT;
stage.addEventListener(Event.RESIZE, setUpScreen);
public function setUpScreen(ev:Event):void{
stage.removeEventListener(Event.RESIZE, setUpScreen);
if(stage.fullScreenHeight > stage.fullScreenWidth){
gameStageWidth = stage.fullScreenWidth;
gameStageHeight = stage.fullScreenHeight;
}else {
gameStageWidth = stage.fullScreenHeight; // 480
gameStageHeight = stage.fullScreenWidth; //1024
rescaleRatio = gameStageWidth / GAME_ORG_WIDTH;
//rescale every object, ie:
myC.scaleX = myC.scaleY = rescaleRatio;
//start filling the Background with the pattern
tileBgF();
and then I use the while loop for filling the screen/background
public function tileBgF(e:Event=null):void {
var bgClip = MyC;
var i:int = 0;
var j:int = 0;
while (bgClip.x < stage.stageWidth) {
bgClip = MyC;
while (bgClip.y < stage.stageHeight) {
bgClip = MyC;
tileLayer.addChild(bgClip);
bgClip.x = bgClip.width * i;
bgClip.y = bgClip.height * j;
j++;
j = 0;
i++;
addChildAt(tileLayer,0);
why does it give me
Line 52
1120: Access of undefined property MyC.
in public function tileBgF
and further more.After filling the background/screen with the pattern , how do i save it all like one big bitMap so i can use /add it after time without doing all the checking of screen and things again.and is it better to use
stage.fullScreenHeight
in the while loop or leave it like it is ,or its irrelevant
Maybe you are looking for
-
Problem with application language
Hi. I have a smal problem. I've followed the sted for translating and publishing an application but I can't seem to set FSP_LANGUAGE_PREFERENCE at connection. I have created 2 application items, ID_LANG, LANGUAGE. The I've created 2 computation proce
-
Download Manager : "This object is no longer available"
I try to download BOBJ Edge BI 3.1 Fix Pack 1.2 for Server Components. Added the item to the Download Basket. Open Download Manager and find the item in the basket. I choose download, but get the error : "This object is no longer available". Any sugg
-
Can't download all old .Mac/Me messages to Mail
Hello, Trying to deal with the move to iCloud... I'm trying to backup all of my online .Mac/Me messages onto my Mac but not all of the messages are downloading from the In box. The messages that were moved into folders (left sidebar) seem to be oka
-
Hi there, Im having difficulty installing Microsoft Office v X in my new MacBook Pro. There is no disc icom appearing on the desktop and no installer option. Can anyone help? Many thanks
-
Flexunit task missing time info
I'm not sure why, but when I run my unittests with the ant task, in the generated report xml, time is always displayed as 0.000.