My ipod mini fell down and after that no sound is coming from the ipod.
Accidentally my ipod mini fell down from 1 feet height. After that I tried to play songs, though everything in the ipod is working properly (display), i am unable to listen to the songs (no sound). I restarted it several times though. What should I do now? Can someone help me with this problem? Thanks a lot in advance.
ipod mini
Open the iPod updater and wait until you are asked to plug your iPod with it. Then click Restore - which will erase all your music with your iPod
Similar Messages
-
today,when i tried to listen music in my iphone 5 ,i noticed that my sound wasnt coming from the speakers but when i plugged earphone ,i listened the sound?? i couldnt recognize the problem with my iphone?? really need help!!
I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.
-
I updated my ipad mini to ios7 and after that the restrictions have been turned on automatically. It was off before the update and I din do after either. I tried 1234 but it doesn't work. Please help me.
1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working? -
hi my iphone fell down and there is a very big dent on the left side. the screen split on both side. can i send it to apple and the repair/change it for like 160€ or how does it work?
Service Answer Center - iPhone - http://support.apple.com/kb/index?page=servicefaq&geo=US&product=iphone <-- enter correct country in drag-down menu once on page.
-
How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes.
And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?Are you just asking because you want to know, or do you have a problem you need to solve? I don't know how to write a program, but I think what your are describing is not an unusual thing for a program to do. The * tells you that changes have been made since the last save, and the program reserves a portion of memory for undo functions. I suppose a coder could tell you how it works, but I don't think it would help an average user to know, but that's just my opinion.
-
When I attempt to download apps, a message pops up saying that I cannot download from the UK store but must do so from the Batbadian store. I am in Barbados and thought that my downloads would be from the US. Cannot find anything in settings to resolve this issue. Any help? Thanks.
Change your country on iPhone, iPad, or iPod touch
Tap iTunes Store, App Store, or iBooks Store.
At the bottom of the Featured page, tap Sign In.
If you're already signed in, skip to step 5.
Tap Use Existing Apple ID.
Enter your Apple ID and password and tap OK.
Tap your Apple ID.
Tap View Apple ID or View Account.
Tap Country/Region.
Tap Change Country or Region.
Tap the Store menu and tap your country.
Tap Next.
Review the Terms and Conditions and Apple Privacy Policy.
Tap Agree if you agree to the terms and conditions.
In the prompt that appears, tap Agree.
Select a payment method and enter your payment information.
Enter your billing address and tap Next. -
Sound is coming from the ear-piece and its really really low
Title pretty much says it.
My iPhone is acting really weird ever since this morning, sound isnt coming from the bottom speakers anymore but instead from the ear-piece and its really low.
I tried resetting the phone with holding down the home and sleep button at the same time but its still the same.
Anyone else having this problem?Connect the headset to a computer or stereo or anything else with 3,5mm minijcack to see if the headset is ok of they work there then your headset is defect if not your phone is the problem
-
Why is itunes so difficult to navigate around?
You will need to connect the iPod to a computer's iTunes, and you may need to put it into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPod and restore / resync the content to it.
If it's done via computer that it hasn't been synced to, and therefore doesn't have a backup on it, then from http://support.apple.com/kb/HT1212 :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. -
I bought a new computer and want to move all my music from the Ipod to the new computer
how do I transfer my music from my Ipod Nano to my new computer?
See this older post from another forum member Zevoneer covering the different ways to copy content from your iPod back to your PC.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
After installing a software update on my Macbook Pro, it would not reboot passed the gray screen and then would shut down.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
My ipod touch stopped playing videos and music for the past three days rest all are working fine.
I doubt the sound system is gone. i tried restoring it several times. I havent mishandled it. Few days back there was audio distortion and slowness so i upgraded to the iOS 5 but the audio/ video doesnt work. Alerts ,sounds ... donot work..Please help me out...Try a restore to factory defaults/new iPod. If still problem then you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
-
I put my volume on mute a few weeks ago, and I don't know if I have used it again since then or not, but now the volume will not unmute. There is a red light glowing out of the headphone jack. Sound through headphones works. I've tried updating and restarting my computer. Help?
No, not forceful - gentle.
A PRAM-reset might also help:
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
Try this a few times.
Stefan -
No sound is coming from the internal speaker of iPod touch
The internal speaker on my iPod touch no longer works. I've already reset it, any other ideas? And yes, it did work before.
was it water or physically damaged, if not
then just check the volume button on the right hand side if volume is not low
if still facing issues then u just need to go to an apple store and get it replaced if your device is still under warranty -
The wheel of my mini fell down?
the wheel of my ipod mini fell down I don't know what I have to do and I want to know how you can help me.
gt5404 Windows VistaWhat does 'fell down' mean?
-
My daughter's ipod touch has been disabled after too many wrong password attempts.
The ipod was never synced to the computer so can't connect to itunes.
How else can we enable the ipod touch again?Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. In your case, choose any computer with iTunes software. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.
Maybe you are looking for
-
How to set some rows in ALV to be editable or some non editable.
Dear all Gurus, I'm facing a situation here, I need your assistance. I'm creating a alv table where the user can enter a data and then this will be uploaded into the system. Now upon validation some records might fail and would need some changes and
-
Hi all, CALL 'C_DIR_READ_START' ID 'DIR' FIELD P_DIR ID 'FILE' FIELD IT_FILEDIR-FILENAME IF SY-SUBRC <> 0. WRITE:/ 'Incorrect File'. EXIT. ENDIF. This is my code for read particular file in server. Iam passing p_dir an
-
Hi Guys I have a servlet that reads a file from the hard disk and sends it to the servlet output stream. Once the servlet is file is placed into the stream it is deleted from the hard disk. I am load testing this using Apache JMeter. The problem I ha
-
How to see data modeller reports in sql developer?
How to see data modeller reports in sql developer?
-
Shipping Point copy problem from F2 to RK
Hi While copying from F2 to RK Shipping Point is not copying which is there in F2, again it is re detrmining in RK. f e.g 1000 plant is having 2 shipping points like 1001 (default) 1002 (manual) 1003(manual) while creating Sales Order system determ