My Ipod Nano 2GB has destroyed 6 headphones HELP!!!

I bought all kinds of headphones of all types of brands(including the original) yet the same thing happens over and over. After a few days of use one of the sides stops working, then if I keep using the entire headphone goes bust. I dont know what to do anymore. When I use with my other mp3 player it goes just fine and no problem ever comes up
What should I do?

It could be an hardware issue of your iPod, may be it caused by the poor contact of the iPod earphone jack. Bring it back to an apple shop for service

Similar Messages

  • Ipod nano 2gb has error 1418

    Well I had over 2gb of music on my itunes...so it said if i wanted to create a playlist that the ipod will go to so the new music will show up...i clicked yes...and then later that day i deleted the old music and then had 1.8 gb so that the ipod could sync all the music. I then DELETED the original playlist that the ipod was getting music from apparently...so i thought that the ipod would be able to sync it. it turns out that the ipod says something like the orignial file cannot be found..or something like that. and then i was just going to restore it to factory settings but that won't work either!!! it says error 1418. so then i updated to version 7...and then i tried to restore it to factory settings again....SAME error!!! what does this mean and how can i fix it?

    Hi psh09,
    Also, have you tried the possible solution from the following document? See if it helps, too, if the suggestions in the article Niel posted above doesn't help with your problem:
    http://docs.info.apple.com/article.html?artnum=304996
    -Kylene

  • Ipod Nano 2Gb Not Recognized

    Hi.
    Today I bought a Second Generation iPod nano 2gb. I've downloaded iTunes and connected the iPod via USB 2.0. All my usb ports are on and they don't turn off. When I plug in the iPod, it charges, but does not show up in iTunes or under My Computer. When I plug it in, my computer prompts me to the New Hardware Installing Wizard. It is always of no help to me so I just cancel it. Under my computer, the Ipod does not show. It also does not show in iTunes. I have done the 4 R's 3 times now. I am sure I've searched everything to make my iPod work. I've looked at all the help topics on this page and I've done everything advised and it still does not show up. PLEASE HELP!
    - Bill

    I tried Run Ipod Diognastics and the Ipod connection has failed even if they Ipod is connected and charging. It comes up with this text.
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Computer Corporation Dimension 4600i
    iTunes 7.0.2.16
    iPodService 7.0.2.16 is currently running.
    iTunesHelper 7.0.2.16 is currently running.
    Current user is an administrator.
    Connected Storage Devices:
    IDE\DiskWDCWD800BB-75FRA0_____________________77.07W77, Bus Type ATA, Bus Address [0,0]
    Universal Serial Bus Controllers:
    Intel(R) 82801EB USB Universal Host Controller - 24D2, PCI bus 0, device 29, function 0. Device is working properly.
    Intel(R) 82801EB USB Universal Host Controller - 24D4, PCI bus 0, device 29, function 1. Device is working properly.
    Intel(R) 82801EB USB Universal Host Controller - 24D7, PCI bus 0, device 29, function 2. Device is working properly.
    Standard Enhanced PCI to USB Host Controller, PCI bus 0, device 29, function 7. Device is working properly.
    Intel(R) 82801EB USB Universal Host Controller - 24DE, PCI bus 0, device 29, function 3. Device is working properly.
    No IEEE 1394 Host Controller found.
    The iPod Service Logging Information:
    [SERVICE: 0xFA8,17:55:18 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Fri Nov 24 17:55:18 2006)
    [SERVICE: 0xFA8,17:55:18 INFO] ##### iPodService starting as a service, version: 7.0.2.16
    [SERVICE: 0xFBC,17:55:18 INFO] Got signaled to go ahead... Starting device manager!
    [SERVICE: 0xFEC,17:55:18 INFO] Listener Window created
    [SERVICE: 0xFEC,17:55:54 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,17:56:16 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,17:56:16 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,17:57:04 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,19:27:50 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,20:01:50 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,20:01:50 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,20:02:30 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,20:03:10 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,20:03:10 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,20:07:42 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,20:07:42 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,20:08:20 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,20:08:50 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,20:44:08 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,20:44:08 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,20:45:05 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,20:51:41 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,20:51:41 INFO] [DevNodesChanged]
    [SERVICE: 0xFEC,20:51:55 INFO] [DevNodesChanged]

  • How to get my photos from my Ipod nano 2gb (colourscreen) to my TV

    I've got an iPod(2Gb) with colour display. And I've got the AV connection Kit. The music is no problem, but I just can't seem to find a way to show my photo's on the tv.
    I read somewhere on this forum that I should click on "TV on" in the slideshow menu. But there is NO "TV On" in this feature. Under "transitions" there is nothing! I read that there sould be the TV On option!???
    CAN SOMEBODY PLEASE HELP ME!
    At the Apple store they said that it should be possible to connect the iPod nano 2Gb to the TV!

    Astrid31,
    Unfortunately for you, the iPod nano does not support TV output through either the headphone port or through a dock. The only iPods that facilitate TV output are the iPod with color display and the iPod with video (5th generation)
    Alex

  • Hardware problem Ipod Nano 2gb

    Recently I've bought Ipod Nano 2gb in the US. Now I'm installing it. When i connect the ipod at the pc, i-tunes recognize it. When I disconnect the ipod, the ipod doesn't react. It shows the screen for choosing the language but none of the buttons react to change something. The hold button is off.
    I've already reset the ipod, without results. The Ipod shows that there are songs on it, and you can play the songs that are downloaded on it.
    The PC recognizes the ipod as a medium.
    Does anyone has a resolution to this problem ?

    Just to make sure...when you say turn...you don't mean physically turn do you? Even though you stated the hold button is off, toggle the button a few times to see if that helps. If you have tried going through all of the 5 R's and the click wheel still will not allow you to make any movement through screens, then you may want to contact Apple for a warranty replacement. Few more questions...does the back light turn on when you touch the click wheel? Do you hear any clicks when you run your finger around the click wheel? I know you said that doing this doesn't allow you to navigate through the screens but I'm curious if it reacts in any way.

  • Two IPod Nanos On One Computer..HELP

    My son has an IPod Nano and has all his songs on my computer, he received free songs when we first hooked it up to ITunes.
    Problem, my daughter now has the same IPod and is using my computer to get her music as well. When we first hooked hers up, she did not receive free music like my son did even though hers is registered too. How does she get the free music and how do we get it so she has her own music list? They do not like the same music and it is trying to put my son's music on hers.
    Please someone help.
    IPod Nano   Windows XP Pro  

    This should help. Using multiple iPods on one computer. I prefer method three.
    Don't know about the free music.

  • Ipod Nano 2gb charges very slowly

    HI...
    My Ipod Nano 2gb needs about 24 hours to charge...
    My is not covered for service anymore but maybe there is a solution without sending it to apple...
    Please help me
    marggi

    After the 24 hours does it have a full charge, or just a partial charge? If it is a partial charge or considerably less then the original charge you might want to consider getting a new battery. You can send it out to get a new battery or replace it yourself with a high capacity replacement. You can go on ebay or the web and search for a high capacity battery for your nano. It will come with the tools required to take it apart and instructions for take apart. It is not a very hard job to do and if you have any mech skill it will be a quick and cheap fix.

  • Ipod nano 2GB only allowing 44 songs then full

    I am trying to import songs from my CD collection and I only have 44 songs on my nano and it says the memory is full. Can someone please help me? There is nothing else on the ipod except songs, no contacts, no photos, nothing else. Please help!!!
    hp   Windows XP  

    As it happans I am a wizz on the keboard and can help.
    when apple say the iPod nano 2GB can fit what 500 songs?, they estimate this at ACC encoding 128 kbps, at 4 MB per song.
    If you have imported your music from CD then it is probally in the uncommpressed format of AIFF, which takes up 20 time more space!!!
    iTunes can convert the songs for you, you go to edit>preferences>advanced> here you can choose where you want your music to go after conversion now from here go to importing and , I would suggest using
    ACC format at 128 kbps (High Quality)
    now back in your library go to edit>select all ( select 1 of the songs first or this will not work) and then click advanced>convert selection to ACC now just let it chew through all of that (it might be an overnight job depending on the number of songs you have being converted).
    Now you should delete your ebtire library of the big AIFF files and under file add new folder, and add the folder that you converted your music too (by default this will be C:/documents and setting/my documents/my music
    then all of your new compressed songs will come on your library at the same quality as they were but 1/20th the size!!.
    if you need any extra help email me at [email protected]

  • PSP w/ 2gb memory stick VS. iPod nano 2gb

    What would you rather have?
    PSP with a 2gb memory stick or iPod nano 2gb
    PSP has gaming and internet capabilities though
    but iPod nano is EXTREMELY portable and with the nike + apple sport kit launching soon if your a runner it would be cool

    They really serve completely different purposes. I have both and would never really consider using the PSP for music. It's just too big & clunky for that. It's great for games though.
    What are you looking for, a portable music player, or a portable game system?
    Cheers!
    -Bryan

  • If my  ipod nano already has music on it but not my account will all my stuff be lost when i sync it to my account

    if my ipod nano already has music on it but not on my new account will all my stuff be lost when i sync it to my new accont and would i still be able to add stuff from the old account to my ipod

    All your iTunes Store purchases are linked to the account.  I do not think you can use two accounts with an iPod*, so you will have to choose one account or the other, and use only the things purchased under that account.
    *I've never actually tried, but that's my understanding.  You'd get a better answer by posting in the correct forum.  Try the iPod forums rather than the Using Apple Support Communities forum.

  • Hello Community. My ipod nano 7g has been stolen - is there a possibility to find and block it if the ipod is connected via itunes?

    Hello Community. My ipod nano 7g has been stolen - is there a possibility to find and block it if the ipod is connected via itunes?

    Nope.  You can report the theft to the police, and that's about it.

  • I have an ipod nano which has photos on and i would like to transfer them to my computer

    I have an ipod nano which has a damaged screen can I still retrieve the photos on it or is it beyond repair.

    You can only do so, IF you had the following setting enabled when you synced the photos to the iPod.  On the iPod's Photos tab in iTunes, there is a setting for Include full-resolution photos.  If that setting was checked, you can Enable disk use for the iPod and find the photos in the Photos folder on the iPod.
    Otherwise, iTunes converts the photos to optimize them for the iPod's small screen, and saves all data for the photos in a single database file (to save storage space).  There may be a third-party utility that can retrieve the images, but they may be very low resolution compared to the original photos.

  • Ipod nano 2gb click wheel doesnt respond

    I got my ipod nano 2gb for christmas and it worked fine. Now when I go to use it the click wheel works and I pick a song and play it but then the click wheel would'nt work anymore. I have tried reseting it and updating it but nothing worked. Any ideas are good thanks.

    THANKS

  • Ipod nano 2GB really 2GB?

    is the ipod nano 2GB really 2GB? or for example 1.78GB?

    well it is 2gb it is exactly 2 gbs but with all the menus ect. it makes it a little less. i would rather have an easy functioning ipod then something hard.
    Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

  • HT201570 Looking for a MSDS for a Ipod Nano 7th generation can anybody help?

    Looking for a MSDS for a Ipod Nano 7th generation can anybody help?

    Here, at the end of the site, you can find some environment specs from ipod nano 7th generation... hope this few informations could help you
    http://www.apple.com/ipod-nano/specs.html

Maybe you are looking for

  • The headphone jack on my macbook pro is not working?

    There is no red light coming from the jack. I tried resetting my SMC. I used headphones with an external mic and the mic works, but still no sound from the headphones. The computer recognizes when they are plugged in and will switch off the internal

  • FCP 5.0 Question

    How do I do a picture in videos? Like So:

  • How to close contract..

    Dear All, I want to close contract which is created using ME31K . How to close it if my requirements are full (created PO and recd goods). And also how to close if requirements are still open (PO not created) Amit

  • Where to enqueue and dequeue correctly

    Dear all, I have an application in which I need to enqueue tables and dequeue when leavin. The application consists of one window. In the window I have several views. One main view with a tray to navigate and a ViewContainerUIElement. When choosing a

  • Role creation in netweaver solution manager

    Hi All:        Can someone tell me how to create/maintain roles in Netweaver Solution manager.        Thanks,        J D