MY IPOD NANO 2ND GEN.S SCREEN HAS GONE BLANK. WHY IS THIS/ I ONLY GET SOME BLACK LINES EVERY ONCE IN A WHILE.

my nanos screen has gone blank. why?

Solution may be found if you search in the "More Like This" section over in the right column.

Similar Messages

  • HT1369 I have a nano 4th generation, the screen has gone blank or I get vertical lines, is there anyone that has had the same problem and fixed it? it does still plays music if I can find it

    Has worked fine since I received it as a gift.  It also worked fine up until the time the screen started with vertical lines then the screen went blank.  any help would be appreciated. It still plays music when I can find it, with the screen blank it is difficult to find.  thanks

    Becaise the digitizer is broken in that area
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit                  

  • My iPod Nano 2nd gen. has a black caterpillar-like shape on the screen when turned off. I recharged and reset. What else should I do?

    My iPod Nano 2nd gen. has a black caterpillar-like shape on the screen when turned off.
    It disappears when turned on. It must mean something. I recharged and reset. What else, if anything, should I do?

    You can work through the remaining five 5 R's of troubleshooting.
    http://www.apple.com/support/ipod/five_rs/
    It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
    Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity.  A third party service will actually replace the damage part for a little less.  Google "iPod screen repair" and you should get a number of results to work with.
    B-rock

  • My iPod Nano 2nd Gen has a battery problem.

    iPod Nano 2nd Gen keep dying after 10 mins of usage. 
    What should I do? How much for Apple service?
    Thank you.

    Do an out-of-warranty replacement for $65.

  • Ipod nano 2nd gen and dock/alarm clock

    i have read through alot of the posts and have not seen anything similar to my question.
    i got my daughter an ipod nano for xmas.
    we really dont leave the computer on alot and she was wanting a docking station/speaker setup. i found one that charges it/ has speakers and is also an alarm clock.
    she likes the idea of having the alarm clock with it.
    this is the model she got: curtis iMode ip210 link to where it was bought http://hhgregg.com/ProductDetail.asp?SID=0B568914D18A4CBEB2E80A95E8C46043&Produc tID=17180
    we have not hooked it up yet because of a small problem maybe. (hooked up to power that is)
    it came with a bunch of different adapters for the different ipod versions. well the nano one is incorrect. i guess due to ours being a 2nd gen version.
    the ipod goes right on the dock fine with out it.
    the little plastic adapter i got with the ipod kinda works in the slot of the radio but would need a little modification to snap in. the difference is the outside shape and would just needed some sanding. i have called the support number for the radio and all i could get from the was its not compatable. and i am not too sure why.
    from what i have found out is all the ipod dock connectors are the same and there is no difference. not sure about this just what i have noticed.
    i tried to call my local apple store and ask them but that guy started talking about firewire and problems. i told him how it docked and what it was and he still insisted on talking about firewire and those problems. i hung up as it didnt sound like he knew anything.
    so now would i be ok in useing the adapter i got with the ipod and makeing some slight mods(sanding outside edge) to it. or is the something totally different between the 1st gen and 2nd gen that would mess up the ipod if put in this unit.
    the reason i want this unit as it will replace her current alarm clock and she has a loft bed and its the only unit that we have seen that will fit and is in our price range.
    thank you for your help
    dawg
    ipod nano 2nd gen   Windows XP  

    The dock adaptor that came with the iPod is meant to fit Apple's universal dock and not a 3rd party accessory.
    The reason you are having issues is because although the dock connectors on iPods are all the same (the pins are in the same place), the connector on the second gen nano is in a slightly different place than on the first. If you look at it from the bottom with the iPod face up, it's slightly more to the left. This, and the fact that it has a metal case with rounded edges, has made the new nano incompatible with almost all these type of accessories.
    It's been mentioned here several times, and a few people have been able to get the manufacturer of the dock to supply them with an adaptor.

  • My ipod nano (2nd gen) is not syncing to itunes.

    Hope someone can help.
    I have an IPOD Nano (2nd Gen) and all of a sudden i can no longer get my IPOD to sync with Itunes.
    It has worked in the past but just recently the ipod icon does not show on the source pane, when i go in to devices all items are greyed out so i can not select anything.
    Any ideas????

    Hi Thecraggs,
    Thanks for using Apple Support Communities.  If your iPod isn't recognized by your computer or iTunes, this article may help:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Ari

  • My ipod nano 2nd gen is showing the apple?support sceen...What do i do?

    my ipod nano 2nd gen is showing the apple?support sceen...What do i do?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here.  Also, if you have IOS-7, read this.

  • Encode at a lower bit rate when uploading to iPod nano 2nd gen

    There is a feature that I liked when I used to put my music on my Motorola SLVR. When I synced my phone with iTunes I had the option to re-encode my files at a lower bit rate (I believe it was aac 128). I there a way to enable this feature for the iPod nano 2nd gen?

    On-the-fly conversion is only available on the iPod shuffle. The iPod shuffle (probably because of it's limited capacity) has the option to "Convert higher bit rate songs to 128 kbps AAC". This option is not available for any other model iPod. For the larger iPods the files have to be converted in iTunes first or indeed have to have been imported in a compressed format prior to transfer

  • Brand new/never been used iPod nano 2nd gen keeps on charging and won't turn on when removed connection to pc/charger. how can i fix this? pls i need help

    brand new/never been used iPod nano 2nd gen keeps on charging and won't turn on when removed connection to pc/charger. how can i fix this? pls i need help
    i did that middle button and top button for 6-10 seconds, hold play button, that hold button and got it right back and still it won't on but it is detected on my pc and itunes. i've already even put on some songs but it keeps on charging and charging for how many hours and if i remove it, it shuts off and won't turn on again.

    brand new/never been used iPod nano
    Call Apple Care.   You are still under warranty.  You also have 14 days from the date of purchase to return your iPod with no questions asked. 
    Take FULL advantage of your warranty.  Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. 

  • I need to get the music off my Ipod Nano 2nd GEN onto either ITunes or in a music foldes on my new computer. Not all the music was purchased from Apple Itunes HOW DO I DO THIS WITHOUT LOOSING ALL MY MUSIC??

    I have not had a computer for several years and I just got a new one. My old computer got a virus and when that happened all my music was lost. Thank goodness I had it all on my Ipod Nano 2nd GEN. Now my problem is that I don't know how to get the music off my Ipod Nano onto my new computer!!! I was able to get the songs that I purchased thru ITunes by just authorizing my new computer. But I have alot more music that is on my Ipod nano that I can't put into my ITunes library. In fact, I can't even get my music into a file folder on my computer!! I really need help. I don't have any copies of the music anywhere else and some of it is hard to get. How do I get my music either into ITunes or into a file folder on my new computer or even if I could get my computer to recognize my Ipod and sync all the music into windows media or something like that. Every time I connect my IPod all that happens is that it tells me if I sync the IPod that it will replace all the music from my ITunes library on to my IPod. And I am guessing that means all my music on the IPod will be erased. PLEASE HELP ME!!!! Thanks from the bottom of my songsters heart

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • When i connect my ipod nano 2nd gen, it charges but does not appear in windows or itunes.  I tried the reset but it didn't work.  how can i fix this?

    I bough a 4g Ipod nano 2nd gen for my cousins birthday.  When i plug it into my computer it charges but does not show up in windows or itunes.  I tried reseting it, reinstalling itunes, everything the site said but it didn't help. I am trying to sync songs to it for my cousin, but it won't work with it not connecting.  Could the wire have something to do with it or is there a bigger problem here?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • IPod Nano (2nd gen.) not displaying in finder or desktop

    iPod Nano (2nd gen.) not displaying in finder or desktop BUT shows up in iTunes, it used to show up on the desktop, I don't get it
    help would be appreciated
    Thanks

    Have the same issue but with latest iPod nano 7 Gen, second day trying

  • ITunes and my PC won't recognize my iPod Nano (2nd gen.)

    Just this morning, my iPod nano (2nd gen.) stopped getting recognized in my iTunes and on my computer hard drive. It still charges when it's plugged into the computer, but the device is not recognized otherwise. What is going on?? Thanks!

    p.s. I also connected it to my husband's laptop and his iTunes wouldn't recognize the device either (if that helps).

  • Itunes won't recognize my ipod nano 2nd gen anymore?

    itunes won't recognize my ipod nano 2nd gen anymore. it just charges it???

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • My computer doesn't recognize my ipod nano 2nd gen

    My computer running Windows 7 doesn't recognize my ipod nano 2nd gen.  Also my ipod not seen in my itunes.  I did all the reset stuff and nothing works.  Do you think it is just shot???

    Make sure you have the latest version of iTunes. Are you a Mac or PC user?
    Hm so have you also tried completely erasing your iPod?

Maybe you are looking for

  • Laserjet pro 200 color mfp m276nw network folder setup on PC Windows 7

    I am trying and trying and trying to setup my Network Folder Setup and I either get the message that there is an error with the file path or an error with my username.  I DO NOT have a password for my username.  I have copied and pasted the file path

  • How do I extract a set of rows from a table based on specified criteria?

    I am using Numbers '08. I have a table that looks like this: I would like to, programmatically, find the MAX amount of all the 'Clothing' category items. More generally I'd like it to work like the COUNTIF function where I can do this: MAX(INCLUDEIF(

  • Word processing within a text component

    Although this is a potentially great application, I am at present prevented from using it to create a website due to the lack, as far as I can determine, of any form of processing individual text within the text components e.g. making individual word

  • Exporting to Shutterfly problems

    I am trying to export an album to Shutterfly and for some reason that album is not showing up in Shutterfly. I did it three time already and each time waited for all of the pictures to export. I got a pop up box saying that the process was done succe

  • Exporting excel file

    Hi all, I have a question related to toad. I am sorry to ask this in here but i cant find "Toad" specific section in the forum, and this is the only tool i can find,so i thought maybe somebody can help me. I am looking to load an excel file to a data