My ipod nano 2nd generation has a white screen when i turn it on.

Everytime i turn on my ipod nano 2nd generation it goes to a white screen and i dont know what to do...can u help me???

Anything new about this?

Similar Messages

Hi, my iPod nano 6th generation has a cracked screen and I would like to get it replaced. Does anybody know of any locations that repair these kind of iPod nanos?

Hi, my iPod nano 6th generation has a crack in the screen and I cannot seem to find any places that will repair this kind of iPod. Are there any places available for screen replacement of the iPod nano 6th generation? Thank you.

i sent mine off to craig at [email protected], it was £25.....like new again

My ipod nano 6th gen has a white screen that states ok to disconnect and it's not connected to the computer

I listened to my ipod last night. My son went to get it and it has a white screen that states ok to disconnect (it is not connected to the computer). It won't let me do anyting to it. I tried to hook it up to the computer and it changes to do not disconnect and then won't let me eject it - it says sync is done but it says I can't disconnect because files are being used somewhere else. Then I pulled it out and it goes back to ok to disconnect.
Hope someone can help me.

i sent mine off to craig at [email protected], it was £25.....like new again

Ipod nano 2nd gen either gets white screen or apple icon but is recognized by itunes! What now

So I have done the reset steps and I will either get the white screen or the apple icon with 2 audible beeps. The Ipod does show up in Itunes, however I cant play music. I dont know if it has been dropped or not as I am doing a favor for a friend. I was able to restore the ipod via Itunes as well but Im stuck here. I dont know how to put in disk mode when I cant see anything on the screen except the white screen or the apple icon. Any Ideas as what to do next or is this Ipod done?

I also have a 2nd generation, which I purchased after my ipod Shuffle stopped updating. We plugged it in, followed the instructions but the Nano was not recognised by my PC, however, my nano does get recognised on my husband's pc. My daughters ipod and my old shuffle both are still recognised on my pc. I need to delete the shuffle, as it is faulty, but more importantly, I need to get my pc to recognise the nano. Please help.

Ipod nano 7th generation has a blank screen

My ipod quit working in the middle of a song. I attached it to my PC and it still has a blank screen and I do not see ipod button on the itunes page. Tried holding down on/off button with home button. Help!!!

contact apple and see if they can replace it.

My hp laptop has a white screen when i turn it on,

have a totally white screen,has windows 7 installed on it,plz help

According to the message you have recently posted I would like to confirm that this could be a hardware issue and I strongly recommend you to immediately Contact HP Technical Support over the Phone for further assistance without any delay to get your Notebook diagnosed and serviced by an authorized HP Certified Engineer
You can also Check your warranty Here to verify the warranty status
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

My MacBook Pro has a white screen when I turn it on

When I start up my MacBook Pro. It just ha a plain white screen and I can also hear a faint beeping (like if you were on a desktop computer holding down a lot of keys on the keyboard) please can someone help me!!??

I can tell you what I did the last time this happened to me:
I made a careful note of my Display settings when my computer started up correctly and everything looked fine
... and, I ensured that the same settings were there the next time I restarted (and it happened that my screen didn't appear to display correctly) I checked these settings. If they had changed, I chose the one that 'worked' for me and it 'set' thereafter. In my case, it was 1280 x 800.
If I were you, I wouldn't shut down my computer too often (just telling you what I do.) I shut down mine only after a week or 10 days so that it can 'clean itself up.'
Hope this helps.
RS

How to fix my ipod nano 4th generation...white screen.

I really need some help here i have no clue to what happened to my ipod. I went to bed one night and put my ipod on my dresser like always, when i woke up the next morning my ipod screen was completely white, but i can still hear my music i just cant use the screen to see what im am listening to. can anyone help me?

Hi there,
You may need to restore the device to factory settings. Take a look at the article below for more information.
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
-Griff W.

IPod Nano 6th Gen - Functional but white screen on pressing wake/sleep button

Hi
I have an iPod Nano 6th Gen (out of warranty & applecare) - hasn't been dropped etc & never had any trouble.
This morning I got the white screen after unplugging it from charging.
I have tried hard reboot (power button + vol down). I have put it into disc mode (hard reboot + both volume buttons) and restored it to factory settings from itunes (10.6.3) . I've even put it into diagnostic mode and looked around to see if there were any tests I could do.
Functionally the ipod works ok - plays music, volume changes, and it will shuffle on shaking/ play pause on double pressing the power button.
The problem is when I switch off the screen by pressing the power button once - if I try to switch the screen on again I only get the white screen (although this doesn't affect music playing etc).
The way to get around this is either doing a hard reboot (which is a pain as it removes all my settings) or by switching off the ipod, waiting 5 minutes, then switching it on again (this preserves my settings). If I switch off the ipod and try to switch it back on within 5 mins, it's straight to the white screen.
The only other odd thing I noticed was that the screen was shaky/jolty and graphics not quite lining up etc, but this only lasted 10s and went once I started playing music...
Any ideas as to what is causing this? I'm guessing maybe a hardware problem but it seems strange that there is no white screen on switching on, just from waking.
It was a present from my dad and I'm very fond of it so would like to keep it/fix it if possible!
Thankyou!

Hello bfsf,
Welcome to the Apple Support Communities!
I understand that your iPod nano (6th generation) displays a white screen after waking from sleep. First let my say that you have completed some great isolation and troubleshooting steps on your own. Because the issue is still present after the fantastic troubleshooting you already completed, it may be necessary to have this iPod evaluated for service. If you would like more information on this process, please read over the information in the attached link.
Apple - Support - Service Answer Center
Cheers,
Joe

My ipod nano (2nd generation) will cont connect with windows or itunes, windows says it has had reported errors??? any help? havnt used ipod in over a week and now it wont work with my computer

my ipod nano (2nd generation) wont connect with windows or itunes, i used it last week (charged it through USB) then this week when i connect it (once again through USB) it wont work, it says "windows has stopped this device because it has reported problems" any help? ive made sure my itunes is up to date, done a reboot on my computer and ipod and still nothing..help please

This could either be a conflict with the iPod's docking port, the iPod's USB sync cable, or even the USB port you are plugging the iPod into on your PC. So the first thing I would try and do is plug the iPod into a different USB port on your PC. Make sure it's a high powered USB 2.0 port as they provide a higher power throughput than older USB ports or even the ones that are sometimes available on the front of the tower.
It might help to disconnected all other USB devices from the PC (minus the keyboard and mouse) and reboot the PC. Then reconnect the iPod once again.
If still no luck, swap out the cable with another known working cable to rule out the possibility of a damaged or faulty cable.
Lastly, plug the iPod into another PC to see if it's recognized there. If the same error appears on another machine, it's likely a hardware issue with the Nano meaning you'll want to have it serviced or replaced.
B-rock

White screen on iPod nano 2nd generation

I get a white screen on my iPod nano 2nd generation. iPod still plays but I can't see what's on screen to control it. Do I need a new battery?

Hi mmeves,
Any luck ? I have got the same problem with my iPod nano too.
I tried resetting but in vain!
Pl. let me know if you could get yours fixed
rgds
Mahesh

IPod Nano (2nd generation) not fully compatible with BOSE SoundDock

I can't get the remote control for my BOSE SoundDock to function with my newly purchased 2 GB iPod Nano (2nd generation).
The BOSE manual states that the remote control will not function properly if the iPod doesn't have the proper (or later) version of Apple software installed.
The "correct" software that BOSE identifies for the iPod mini (Nano) is version 1.2 or later.
This, however, appears only applicable to iPod 1st generation Nanos.
My brand new ipod Nano has version 1.1.2 software and iTunes has confirmed this to be the most current software for this 2nd generation unit.
Is this a common problem? It's hard to believe the BOSE unit does not cover 2nd generation iPod Nano software.
Other than the non-funtioning remote control, the BOSE unit works fine and with the BOSE-supplied black adpater for the Nano.
Dell PC Windows XP
Dell PC Windows XP

Actually, the BOSE SoundDock is compatible with the iPod Nano.
After troubleshooting with the BOSE staff, and some excellent customer service, the problem was narrowed down to the remote control device.
BOSE sent out a new remote control and the unit works fine with my iPod Nano.
Appreciate all who offerred assist in this matter.
Dell PC Windows XP

My iPod nano 2nd edition has died on me. I can press on menu and centre of the wheel and the apple logo comes on for seconds, then I get a glimpse of the menu list then the screen goes dead. What can I do? Can anyone help please?

MY iPod Nano 2nd generation iPod has died on me. I've charged it both by connecting to my laptop and also separately. I press the centre wheel and menu and the apple logo appears for a few seconds, then I get a glimpse of the menu then it disappears again. I have tried everything even leaving it plugged into the power for about four hours but it made no difference. What can I do?

Probably not a good sign especially given the age of the device. Are you able to get it into Disk Mode long enough so that you can restore it in iTunes?
Putting iPod into Disk Mode
Otherwise, it might be time to have the iPod serviced or replaced.
B-rock

Ipod nano (2nd generation) won't play any sound

as the title says, my ipod nano (2nd generation) wont play any sound. the songs still play just fine, but no sound or very little sound is coming out. i've tried different headphones, none of them working. and then i attempted using my speakers which worked at the highest volume of both the ipod and the speakers, but very little sound came out and it sounded fuzzy.
after this, i reset my ipod, then restored it, and still no sound. so i reset the ipod again, making sure that everything under the setting was correct for the sound. i even tried putting the clicker on "headphones" and that didnt work either. it connects to the computer fine and has a fully charged battery.
help please?
Windows Vista

thank you for your suggestions, but everything seems to be working normally except the sound coming out of the ipod. i reset the volume limit and nothing. also, there was no volume limit in the summary tab.
again, thank you for your help... any other suggestions/ideas?

IPod Nano 2nd generation software version

Hi
I need to grab a used iPod Nano 2nd Generation to replace the one I left on the plane : (
It's quite amazing how much value these units hold on eBay. My question is, what is the latest (or possibly the last) software version that Apple has released for this unit? I want to make sure that I ask the eBay seller what version of the software is installed on the one I'm looking at, as I feel that a currently updated unit will have the best chance of functioning properly. I am running Windows 7 on my home computer.
One of the ones I'm looking at has a picture of the information screen on the unit and it says it has software version 1.1.3. That can't be anywhere close to the last/best one, can it?
I assume that 2GB, 4GB and 8GB are the same in terms of software. I am looking for a 4GB version, or possibly an 8GB.
Any help is appreciated.
Nick

That is correct. Version 1.1.3 was the last firmware update released for the 2G Nano.
B-rock

My ipod nano 2nd generation has a white screen when i turn it on.

Similar Messages

Maybe you are looking for