My ipod nano (2nd generation) will cont connect with windows or itunes, windows says it has had reported errors??? any help? havnt used ipod in over a week and now it wont work with my computer

my ipod nano (2nd generation) wont connect with windows or itunes, i used it last week (charged it through USB) then this week when i connect it (once again through USB) it wont work, it says "windows has stopped this device because it has reported problems" any help? ive made sure my itunes is up to date, done a reboot on my computer and ipod and still nothing..help please

This could either be a conflict with the iPod's docking port, the iPod's USB sync cable, or even the USB port you are plugging the iPod into on your PC.  So the first thing I would try and do is plug the iPod into a different USB port on your PC.  Make sure it's a high powered USB 2.0 port as they provide a higher power throughput than older USB ports or even the ones that are sometimes available on the front of the tower.
It might help to disconnected all other USB devices from the PC (minus the keyboard and mouse) and reboot the PC. Then reconnect the iPod once again.
If still no luck, swap out the cable with another known working cable to rule out the possibility of a damaged or faulty cable.
Lastly, plug the iPod into another PC to see if it's recognized there.  If the same error appears on another machine, it's likely a hardware issue with the Nano meaning you'll want to have it serviced or replaced.
B-rock

Similar Messages

  • IPod touch 2nd generation will not connect to home wifi

    My ipod touch 2nd generation will not connect to the internet. I am using a BT modem and this is a new problem. Until recently, I had no problem with this connection and it will connect to BT Fon and BTOpenworld. I just cannot get it to connect at home any more. I also use a macbook pro and this is connected to the bt modem.

    You should post this in the iPod Touch forum.  This is the iPod Shuffle forum.
    https://discussions.apple.com/community/ipod/ipod_touch
    B-rock

  • My ipod nano 2nd generation will not turn off, would i be able to get it replaced

    My ipod nano 2nd generation will not turn off, could i fix or replace this ?

    What do you mean it won't turn off?  How are you trying to turn it off?
    B-rock

  • HT1365 my ipod nano 7th generation will not connect with my MacBookAir 2012 11 inch. It will pair but the message on my ipod says that it can't and make sure it is in range and on but it is.

    it is and all ready mut wont work tried moving but still dosn't work

    Well, shut my mouth!  There was a similar question over to the right about a 6th generation nano repeating over and over again -- I read the answer to that one, followed the instructions, and holy crap, it's back to normal.
    Is there a name for this when you end up replying to your own aggravating question?  That's what I did.  Now I can go out and listen.  It's only 91 degrees.  Heaven. Thanks, Apple. 

  • My ipod nano 4th generation will not connect to my windows vista computer.

    I am attempting to add new songs to the nano but it is not recognized by my computer.

    The following may help: iOS: Device not recognized in iTunes for Windows

  • When I plug in my ipod nano 2nd gen, it doesnt connect it to my itunes.

    When I plug in my ipod into my itunes, it only charges and doesnt connect to itunes when i try to update some songs. whats happenin?

    Have you had a chance to look at these troubleshooting documents? They may be of some help:
    iPod shows up in Windows but not in iTunes
    iPod missing in My Computer and in iTunes

  • HT5261 my itunes updated last week and now it wont work at all.

    it keeps telling me it was installed wrong.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • HT5610 is ipod nano 2nd generation compatible with Windows 8?

    my ipod nano 2nd generation,  will not sync.  itunes says it is syncing, but nothing changes on my ipod. i tried resetting it, and everything stays the same on the ipod, not matching my current library.   i also tried manually dragging and dropping items onto the device, and still nothing happens.  i don't want to wipe everything off my ipod if it isn't compatible with windows 8, because then i won't be able to put my library, what songs/playlists are already there,  back on the ipod.

    it was until the last update of itunes, and many are having issues

  • My Ipod nano 7th generation will not sync.

    My Ipod nano 7th generation will not sync, I have updated itunes very recently. Everytime I try to sync anything, playlists, music, podcasts, or even photos from my computer, It does not sync. However before It syncs it tells me that I need to authorize my computer so that I can play purchased songs, so I log in with my apple ID and it says that the computer is now authorized but then when I press the sync button again the same message pops up over and over. Can anybody fix this?

    Hello stowie10,
    I would make sure that music is checked to sync, or any other data at that. Check out the following article to get the squared way with this setup.
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.  

  • My ipod nano 6th generation will not work connected to my car radio?

    my ipod nano 6th generation will not work connected to my car radio? My wife's ipod nano 4th generation works perfectly.

    Hey CorineNL,
    If your iPod not recognized by iTunes or computer, I would follow the directions here:
    Follow this troubleshooting assistant.
    Also see these articles for further assistance:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iPod not recognized in iTunes and Mac desktop
    from: iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • Should an iPod Nano 2nd Generation Work With Windows Vista?

    I understand that many people are having problems with their iPods and come here for support and solutions.
    I'm just wondering if the iPod Nano 2nd generation 4g I have that is working just fine SHOULD work with latest iTunes on Windows Vista laptop (which I haven't used yet)?

    mmu1253397 wrote:
    I understand that many people are having problems with their iPods and come here for support and solutions.
    I'm just wondering if the iPod Nano 2nd generation 4g I have that is working just fine SHOULD work with latest iTunes on Windows Vista laptop (which I haven't used yet)?
    Just to close this out I was able to connect the second generation 4g iPod Nano without issue. In a matter of minutes I had it loaded, recognized by iTunes with up-to-date software, sync with over 900 songs and almost 200 pictures and then ejected (I manually manage music)! Really sorry for those who can't get iTunes and/or iPod to work!

  • My Ipod nano 3rd generation will not sync with itunes or show up on windows, but other ipods do when connected

    My Ipod nano 3rd generation will not sync with itunes or show up on windows, but other ipods do when I connect them using the same setup.

    Hey Biglou1,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand that your iPod nano(3rd generation) is not recognized in iTunes. The following troubleshooting assistant may provide a resolution:
    Apple - Support - iPod - iPod nano (3rd generation) Troubleshooting
    http://www.apple.com/support/ipod/five_rs/nano3gen/
    If the above did not resolve your issue, choose an applicable article below that best describes your issue.
    Windows
    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iTunes reports that "iTunes cannot recognize this iPod at this time"
    Thanks,
    Matt M.

  • IPod nano 2nd generation works with iTunes but screen blank!

    Ive had my black iPod nano 2nd generation for quite a bit of time now, the iPods screen wouldnt come on one day but iTunes acsepted it and so i restored it. The screen was still off and so now im here asking, Please help, Thanks!

    Hello upthereds,
    And welcome to Apple Discussions!
    I have purchased a windows 7, 64 bit laptop. I have a 2nd generation iPod Nano if I download the 64 bit version of iTunes will this cause problems with compatibility between my laptop, iTunes version 10.1 and the 2nd generation iPod Nano?
    Yes it is compatible and should work. Let us know if you run in any problems though and we'll do what we can to help.
    B-rock

  • My ipod nano 6th generation will not turn on.

    My iPod nano (6th generation) will not turn on. I have charged it (attached to my computer) for 30 minutes. I have tried to reset it (held down Wake and Volume Down for 8 seconds)- no response. I have factory restored it (through iTunes)- no response. It shows up as connected to my computer and will sync in iTunes, but the display on the iPod will not turn on. Any ideas?

    Hey s.mccarter2010,
    Thanks for the question. After reviewing your post, it sounds like you have tried a lot of things and the iPod still will not turn on. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iPod won't turn on
    If you have tried the solutions above and iPod still won't turn on, check the following:
    Make sure iPod is the only device in your FireWire or USB chain. Disconnect everything but the mouse, keyboard, and your iPod, then see if it will turn on.
    Make sure you are using the FireWire or USB cable that came with your iPod, and that the cable is in good condition.
    Try connecting iPod to the built-in port of a different computer to see if that works. Note: If using a portable computer, make sure it is plugged in to a power source and that the lid or display is open. If the lid is closed the computer may go into either standby, sleep, or hibernation mode and iPod will not charge properly.
    If you still can't turn iPod on after performing these steps, it may need to be repaired. You can arrange for repair at the iPod Service Website.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • IPod shuffle 4th generation will not connect to iTunes.

    iPod shuffle 4th generation will not connect to iTunes.  Windows Vista and iTunes, all updates current.  Cables secure & connected.  Device driver will not load.  iPad will connect when tried with several other computers.  When I try to connect it will hang iTunes until I re-boot.  iPad does NOT appear in Windows Explorer either.

    Oh, so the iPad DOES work fine connected to the same computer and the same port.  I thought you said it did not in the first post, but maybe you got that working (or I misunderstood before).
    NOTE:  When things are working properly, the shuffle will not appear in Windows Explorer (except when actively syncing), unless you have Enable disk use turned on for the shuffle.  So not seeing it in Windows Explorer may not be a problem.
    Is this shuffle a new purchase... so it did not previously work for you on this computer?  If so, make sure that the shuffle end of the USB cable is fully inserted into the headphones jack.  The fit can be tighter than expected, and it may seem connected, but is not.  For a surprising number of people, this was the problem.
    In iTunes, is the sidebar (along left side of window) visible.  If it is hidden, from the iTunes menu bar, under View, select Show Sidebar.  When there are no devices connected, the heading DEVICES should not appear in the sidebar.  When you connect your iPad, DEVICES should appear, with the iPad listed below.  If you connect the shuffle, it is be added to the list under DEVICES.  To confirm, you do not see the shuffle listed there under DEVICES, when it is connected?
    When you connect the shuffle, does its light on the shuffle do anything?

Maybe you are looking for

  • SAP Signature Design & Task Bar Auto-Hide Feature

    Hi Experts,   I'm having a problem with SAP Business One 8.8 PL18 using the new 8.8 SAP Signature Design. We are in a business with 4 professionals and 1 CRM. When we use the SAP Signature Design Skin Style and you have SBO maximized on the screen an

  • Circle Sunday Calendar Year

    Hii    I have a real issue regarding FI Calendar year .In my case the financial runs for April to March.But there is a financial year variant maintained for Nov-Oct financial year also,which taked the circle sunday concept of period definition i.e th

  • HELP!!!  WIRELESS NETWORK NAME CHANGE

    Does anyone know how to change the wireless network name on a linksys wireless-G router? I can find any software ANYWHERE that will work on a mac. is there any mac drivers or anything out there for this product?

  • Data pump export reliable when database is in use?

    Can anyone tell me if the expdp utility for 11g is reliable when the database is up and running? How does it keep the tables static? Thanks for taking my question! Kathie

  • Adobe Reader for Mac OSX

    I want to upgrade to Adobe Reader 10.0.2.  What version of OSX supports it? CoCo