My Ipod Nano 4th gen click wheel won't work will apple be able to fix this?

My Ipod Nano 4th Gen's Click Wheel won't work.Is there a way that Apple can repair this for me and how much will it cost?

Apple will exchange your iPod for a refurbished one for $99 for the 16 GB one and $149 for the others. You can send it to Apple or exchange it at an Apple store
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
. They do not fix yours.
Apple - iPod Repair price

Similar Messages

Ipod nano 3rd gen (click wheel)

I currently have a ipod nano 3rd gen with a click wheel. I have uninstalled, reinstalled itunes and rebooted my computer already (I have windows XP). It shows up in "My Computer" as unknown but itunes will not reconize the ipod is connected, but does with my other ipod. I've tried changing the drive letter on this 3rd gen; but it wont appear to even change the drive letter. I believe I need to download the drivers (its what i had to do with my previous ipod) but I would like a clue where to download the drivers from, or someone to shed any light and a solution for this issue. My ulitmate goal is to get itunes to reconize it so that I can restore the ipod
Thanks.

Clickwheel games are no longer available in the iTunes store. Sorry.
B-rock

IPod Nano 4th generation click wheel not working. HELP!

i have the ipod nano 4th generation, and my click wheel doesnt work. I've had my ipod in my coat for a few days without knowing and im wondering if its because of the cold. my computer detects it and it turns on and off perfectly. the ipod is also in a very good condition.

Intermittent problems are only covered if BB can verify them.

IPod Nano 4th gen - screen flickers, won't turn on, isn't recognised by computer or iTunes.

My 4th gen iPod Nano has been playing up.
When I connect it to my computer or a dock, the screen flickers with the Apple logo. Once unplugged, it won't turn back on and the screen goes completely black. I tried to reset it numerous times (both connected and unplugged) but that didn't help at all.
I tried to see if I could fix it by restoring it and putting it in disk mode, but the iPod isn't recognise by any of the computers in my house and doesn't appear in either iTunes or 'My Computer' so that really doesn't help. I'm positive it's not an issue with my computer or USB cable because the other iPods in my house connect just fine.
Any idea on how to fix this?

If you have synced your iPod touch to a computer, it should be relatively easy to fix. Plug the iPod into the computer to which it is synced. Once plugged in, hold the home (square button on front) and the power button on the top for approximately 10-15 seconds. After the apple disappears from your screen a couple times, a new screen will popup indicating to start iTunes on your computer. Once you start iTunes, you will be given the option to begin the restore mode and then choose to restore your particular iPod. Once again, you have to had synced your iPod to a computer to utilize this option. Not sure how I figured it out, but I finally did! Good luck and let me know if it does/doesn't work for you.

IPod Touch 4th gen notification center won't work

Ever since i bought my iPod, sometimes it just doesn't send any push notifications at all. I checked my settings, and all notifications are on but still it doesn't work. On top of that, I can't send or receive iMessages. It's really anoying. Even after rebooting my notifications don't appear. It sometimes takes two days, and then I get all notifications I didn't get over these two days. Does anyone know what's wrong? It's really annoying.
Thanks

Other users of 1G iPod (or any iPod with iOS 3.x) have experienced the same problem within the last couple of days. It appears that Apple updated the App store website to cause this problem. For the time being you just have to download them to your computer and sync them to your iPod.

Ipod nano 7th gen has has a blank white sreen? how can i fix this?

turns on but only shows a white screen

You can work through the remaining five 5 R's of troubleshooting.
http://www.apple.com/support/ipod/five_rs/
It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
Otherwise, it's likely a hardware issue with the iPod's LCD display. Since the device is still under a year old, it should still be covered by Apple's 1 year warranty against manufacturing defects. They should exchange it out for a new one at no cost.
B-rock

How much will it cost to replace the click wheel on my ipod nano 4th gen?

how much will it cost to replace the click wheel on my ipod nano 4th gen?

Depends on whether you have Apple do it or a third party repair company (which will be much cheaper). Here are Apple's repair quotes.
http://www.apple.com/support/ipod/service/prices/
B-rock

How do you fix a corrupt ipod nano 4th gen

how do you fix a corrupt ipod nano 4th gen?

Hi bigmike94610,
Welcome to the Apple Support Communities!
For iPod nano troubleshooting I would suggest the troubleshooting outlined in the following web link. I would suggest working through the steps in the order presented on the website, but you may ultimately need to restore your iPod.
Apple - Support - iPod - iPod nano (4th generation) Troubleshooting
Best regards,
Joe

My click wheel won't work, and I don't know what to do..

Could someone please help me out here? I have an Ipod Video, and the click wheel won't work at all. The only times the ipod will respond are if I toggle the hold button, or reset the ipod. Does anyone know what's wrong with my ipod?

Welcome to Apple Discussions!
What happens when you press play? Does it play anything? Do the buttons work?
Also, you may want to try a restore as well...
Restore the iPod
btabz

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
(When you replaced the Hardisk, you should also replace the battery.)
Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
Have a nice day!

4th gen click-wheel iPod not syncing

I have a 40GB 4th Gen click-wheel iPod that although works fine will not sync with my iTunes. I have done all normal troubleshooting items (5R's, restored factory settings, etc.). I am running it on an HP computer and have all software versions up-to-date. Specifically when I place the iPod into the docking station the connection begins, but then a loud whirring occurs and then the "Do Not Connect" message does not go away and I can't eject it. I have no warranty on the unit anymore and need to know if there is a fix or should I just take it to Apple store for troubleshooting.

Its a problem with iTunes 7. Many people are experiencing the same problems.
Here are just a couple examples:
http://discussions.apple.com/message.jspa?messageID=3403194
http://discussions.apple.com/thread.jspa?threadID=705735&tstart=0

HT1605 when i'm not using it it turn off and won't turn on so i have to reset my ipod nano 4th gen just to turn it on. what will i do? is there something wrong with my ipod? is it ok to reset the ipod always?

when i'm not using it it turn off and won't turn on so i have to reset my ipod nano 4th gen just to turn it on. what will i do? is there something wrong with my ipod? is it ok to reset the ipod always?

when i'm not using it it turn off and won't turn on so i have to reset my ipod nano 4th gen just to turn it on. what will i do? is there something wrong with my ipod? is it ok to reset the ipod always?

Itunes won't recognize my ipod nano 4th gen (or any other ipod) as a device

i've had my ipod nano 4th gen for as long as 4th gen's have been around. never had a problem with it or itunes. until now. all of a sudden, when i plug my ipod in to sync the new music purchased, itunes doesn't even recognize my ipod. "devices" never even comes up. "sync ipod" under file isn't highlighted. my ipod only shows as charging. since this problem occurred, i've tried my husband's ipod and it isn't recognized. i've used numerous cords in both USB ports. i've uninstalled and reinstalled itunes. nothing is working! any suggestions would be greatly appreciated!!!!

Here'sa link that might help
p://support.apple.com/kb/TS1363

I want to know how i can get more games for my ipod nano 4th gen?

I have an ipod nano 4th gen i pod. Ive been trying to find games for it in the itunes store but i can only find 2 tabs one for iphone the other for ipad, but nothing for ipod. There dont seem to be any clear info on it in the store. Ive looked on the web to see if i can find help but i cant find this button they say that says Ipod games thats supose to be to the right of the screen. Can any one help me please?

Apple quit offering click wheel games over 2 years ago.

IPod nano 4th gen - Apple Mobile Device Driver issue

I have an iPod Touch that connects and syncs perfectly with iTunes but I can't find any way of doing the same with my wife's iPod Nano(4th gen).
Whenever I connect the nano it appears under Universal Serial Bus Controllers as Apple Mobile Device USB Driver but with the dreaded Yellow Exclamation mark.
I've tried:
The 5Rs
Different cables
Different ports
Disabling drivers
Uninstalling drivers
Removing all Apple software (in the correct order) and reinstalling
The only error message I get, other than the Exclamation Mark, is when I check the Driver Properties, it shows "This device cannot start. (Code 10)".
If I click on Properties, Driver and Update Driver, Install from specific location I see:
Apple iPod USB Driver Version 6.0.9999.40 (12/11/2008) and
Apple iPod USB Driver Version 6.0.9999.61 (11/05/2012) and
USB Mass Storage Device
Does anyone have any other suggestions as to what I can try?

The code 10 might be caused by old driver componentry "stuck" in the bowels of your OS. If that's what is going on, we might be able to get past this ... but I'm afraid it's a bit of a performance.
First, go into "My Computer". Go "Tools > Folder Options". Go to the view tab.
Make sure "Show hidden files and folders" is selected.
Make sure "Hide extensions for known filetypes" is unchecked.
Make sure "Hide protected operating system files (Recommended)" is unchecked.
Click OK.
Now in "My Computer", open "Local Disk C:" or whichever drive your Operating System is installed on.
Open the "Windows" folder.
Open the "system32" folder.
Open the "DRVSTORE" folder.
In there look to see if you have either of the following two folders:
netaapl_(LongStringOfNumbers)
usbaapl_(LongStringOfNumbers)
If you find either of them, drag them out onto the desktop. (Don't touch any other files or folders you see in there.)
Now go back into the "system32" directory.
Open the "Drivers" directory.
Look for either of the following two files:
netaapl.sys
usbaapl.sys
If you see either of them in there, drag them out onto the desktop. (Again, don't touch any other files or folders you see in there.)
Now restart the PC. Try a complete uninstall/reinstall of itunes and related components as per the following document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
... and then try connecting the nano again. Any better luck this time?

My Ipod Nano 4th gen click wheel won't work will apple be able to fix this?

Similar Messages

Maybe you are looking for