My ipod nano 4th generation will not connect to my windows vista computer.

I am attempting to add new songs to the nano but it is not recognized by my computer.

The following may help: iOS: Device not recognized in iTunes for Windows

Similar Messages

  • IPod shuffle 4th generation will not connect to iTunes.

    iPod shuffle 4th generation will not connect to iTunes.  Windows Vista and iTunes, all updates current.  Cables secure & connected.  Device driver will not load.  iPad will connect when tried with several other computers.  When I try to connect it will hang iTunes until I re-boot.  iPad does NOT appear in Windows Explorer either.

    Oh, so the iPad DOES work fine connected to the same computer and the same port.  I thought you said it did not in the first post, but maybe you got that working (or I misunderstood before).
    NOTE:  When things are working properly, the shuffle will not appear in Windows Explorer (except when actively syncing), unless you have Enable disk use turned on for the shuffle.  So not seeing it in Windows Explorer may not be a problem.
    Is this shuffle a new purchase... so it did not previously work for you on this computer?  If so, make sure that the shuffle end of the USB cable is fully inserted into the headphones jack.  The fit can be tighter than expected, and it may seem connected, but is not.  For a surprising number of people, this was the problem.
    In iTunes, is the sidebar (along left side of window) visible.  If it is hidden, from the iTunes menu bar, under View, select Show Sidebar.  When there are no devices connected, the heading DEVICES should not appear in the sidebar.  When you connect your iPad, DEVICES should appear, with the iPad listed below.  If you connect the shuffle, it is be added to the list under DEVICES.  To confirm, you do not see the shuffle listed there under DEVICES, when it is connected?
    When you connect the shuffle, does its light on the shuffle do anything?

  • My ipod nano 4th generation will not turn on or charge.  It is just sitting (frozen) at a black screeen.

    My ipod nano 4th generation will not turn on or charge.  It is just sitting (frozen) at a black (blank) screen.  What do I do?

    Hello, HJA-heartgirl. 
    There are a couple things you can try to troubleshoot this issue.  Below, I have included a couple articles that will help you troubleshoot your iPod.
    How to reset iPod
    http://support.apple.com/kb/ht1320
    iPod nano (4th generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/nano4gen/
    Regards,
    Jason H. 

  • My Ipod nano 4th generation will not charge or turn on! Please help

    I bought a refurbished Ipod nano 4th generation 2 weeks ago from a good reliable ebay seller. It arrived and was in great working order with no issues what so ever. However this evening I realised it was out of battery, so I went to charge it and nothing. No light up, no recognition of it being plugged into the PC or when I try via a plug socket. I have contacted the seller about this asking for a refund as I have not done anything or put it anywhere that it would die like this. However I thought before I try to send it back I would try here and see if anybody knows what may be wrong with it.
    Thanks

    You need a new battery. 

  • Ipod, nano 4th generation, will not charge using my PC or my dock.  It's 5 years old and has charged using both methods since I got it.

    My ipod will not charge when connected to my dock or my computer.  I will play when connected to both.  I have tried both USB ports, checked the connections on my dock (power light is on) and it will just not charge. 

    Howdy Crickety22,
    Using the USB cord in different locations is a great way to help isolate this kind of issue. Since you have done that, the next step I would recommend is testing a different USB cable with the device.
    Check out this info from the article named Archived - iPod's battery doesn't charge found here http://support.apple.com/kb/ta44551
    Faulty cable
    If something is wrong with the FireWire or USB cable that came with iPod, it may not supply any power to charge the battery. Note: Only iPod models with a Click Wheel can get power from a high-powered USB port using the supplied cable (includes iPod mini, iPod (Click Wheel), iPod photo, iPod with color display, iPod nano, and Fifth Generation iPod).
    Make sure you are using the cable that came with iPod. Some third-party cables may not work properly with iPod.
    Make sure nothing is in or blocking your computer's FireWire or USB ports.
    Check the connections to make sure the cable is completely plugged in.
    Try another known-good FireWire or USB cable if available.
    If this resolves the issue your FireWire or USB cable needs to be replaced. You can arrange for replacement at theiPod Service Website.
    And this part as well:
    Faulty dock connector or FireWire port on iPod
    If something is wrong with iPod's FireWire or Dock Connector port, it may not supply power to iPod.
    Make sure nothing is in or blocking iPod's FireWire or Dock Connector port.
    Check the connection to make sure the FireWire or Dock Connector cable is completely plugged in.
    If this did not resolve the issue iPod needs to be repaired. You can arrange for repair at the iPod Service Website.
    Regards,
    Sterling

  • What do you do when your ipod nano 4th generation will not turn on even if you charge it?

    i have a 4th generation ipod nano and it died so i tried charging it for an hour and it wouldn't turn back on. then i connected it to my computer and it would not even turn on or show up on my computer. What do i do?

    You could try taking it to a Mac store and see what they have to say, but it might just be dead.

  • IPod touch 4th generation will not connect to Uverse internet

    When Uverse internet was setup in my home my 64 gb IPOD touch 3rd generation stopped connecting to internet.  I've turned my wifi off and on (that doesn't work), I've tried rebooting the IPOD by turning it completely off then turning back on.  I've manually added my IP address, network and password and it's still not working.  Is there anybody in the community that can give me a few positive suggestions?  Thanking all of you in advance.

    - Contact Uverse support
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.

  • My ipod nano 4th generation will not turn on when i rstart it it gets stuck on the apple icon screen what do i do

    my iPod will not turn on when I charge it or restart it it just gets stuck on the apple icon screen what do I do to fix it

    Hello crimsonflare,
    Try this first:
    Apple - Support - iPod Troubleshooting Assistant
    If that does not work, use this:
    Putting iPod into Disk Mode
    and try to restore you ipod.
    Hope this helps.
    ~Julian

  • My ipod nano 4th generation will not sync

    I am trying to sync the photos onto a new computer but it does nothing

    it is usually one way from pc to ipod nano, not the other way around

  • My ipod touch 4th generation will not connect to Itunes.

    I registered it on a different computer and then was able to connect after that. Now it won't connect to Itunes, but my old Ipod still connects I did the suggestions and also redownloaded Itunes. Any suggestions?

    Did you try all the troubleshooting here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • My ipod nano (4th Generation) will not turn on

    I just got my ipod 3 months ago and its been working fine until today. The only reason I can think of is- ok my mistake- I was in my hot tub and I had my ipod on the IHOME (I believe that is what you call it)...... and I might just splash a little. The problem is that I put the IHOME up after I get out and I leave the Ipod on the IHOME. And I find the next day that it won't work. So now I'm freaking out so if there's anybody there.......HELP!!!!!!!!!!!!!!!!!!!
    P.S. The port where you put the USB cord in the Ipod smells burnt

    OK:Because I already had one water damaged,here is what I am going to do.Apple should be doing this because I think leaving the adapter port wide open is inviting water damage disaster(a bit of sweat,splash of water from the kitchen sink)
    I ordered 2 oem travel chargers for .68/each.
    I'm going to cut off the charging cable and use the adapter plug to protect that opening while using the nano.
    Anything is better than nothing.

  • HT1365 my ipod nano 7th generation will not connect with my MacBookAir 2012 11 inch. It will pair but the message on my ipod says that it can't and make sure it is in range and on but it is.

    it is and all ready mut wont work tried moving but still dosn't work

    Well, shut my mouth!  There was a similar question over to the right about a 6th generation nano repeating over and over again -- I read the answer to that one, followed the instructions, and holy crap, it's back to normal.
    Is there a name for this when you end up replying to your own aggravating question?  That's what I did.  Now I can go out and listen.  It's only 91 degrees.  Heaven. Thanks, Apple. 

  • My ipod nano 4th generation will not turn on, and is no longer detected by the computer and itunes. What to do?

    help me please !!

    Sounds like a dead battery. Take it into your local Apple store/Genius bar and see if there is anything they can do for you.  Another option is to send it in to a third party repair company who can replace the battery at a pretty low cost.
    B-rock

  • My ipod nano 6th generation will not work connected to my car radio?

    my ipod nano 6th generation will not work connected to my car radio? My wife's ipod nano 4th generation works perfectly.

    Hey CorineNL,
    If your iPod not recognized by iTunes or computer, I would follow the directions here:
    Follow this troubleshooting assistant.
    Also see these articles for further assistance:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iPod not recognized in iTunes and Mac desktop
    from: iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • My Ipod nano 3rd generation will not sync with itunes or show up on windows, but other ipods do when connected

    My Ipod nano 3rd generation will not sync with itunes or show up on windows, but other ipods do when I connect them using the same setup.

    Hey Biglou1,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand that your iPod nano(3rd generation) is not recognized in iTunes. The following troubleshooting assistant may provide a resolution:
    Apple - Support - iPod - iPod nano (3rd generation) Troubleshooting
    http://www.apple.com/support/ipod/five_rs/nano3gen/
    If the above did not resolve your issue, choose an applicable article below that best describes your issue.
    Windows
    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iTunes reports that "iTunes cannot recognize this iPod at this time"
    Thanks,
    Matt M.

Maybe you are looking for

  • IPod is recognized in Windows, but not in iTunes.

    Ive followed the support site on what to do if the iPod is recognized in Windows but not iTunes... but to no avail. ive had a 20GB photo thats been working o.k. (need to send it in) but now neither it nor my new 30GB Video will appear on iTunes... ju

  • Sorting measures (calculated members) in SSAS cube designer

    Hi, In SSAS 2012 cube designer, on the "Calculations" tab I am writing some simple calculated members and displaying it in a folder (Display Folder=) FolderA am So this FolderA has the members as below : [<-A1], [-A1], [A], [A1], [A2], [A3], [A4], [A

  • When will Siri be avalible in Canada?

    Hi, I am interested in buying an iphone, but hesitant because Siri is unable to locate places in Canada. It is a large features that is unavalible to all Canadians. Does anyone have an idea as to when the this feature will be avalible in Canada? With

  • Facetime the volume is too loud

    I just updated my iPod touch to iOS 6 and when I  Facetime the volume is too loud even if I turn it down. I tried to restore it several times but nothing changed...what can I do? Do I have to send it to Apple support?

  • Order by on Non-base table Item

    Hi, I have a base table block on Dept and some of the non-base table items(which are emp table and being populated through post-query). So, i have some base table items and non-base table items on the same block. No my problem is, i have to do ORDER