My ipod nano -5 th generation does not start up after long charging period, no lights come on

MY IPOD NANO - 5 GENERATION WILL NOT START AFTER LONG PERIOD OF CHARGING, NO LIGHTING AT ALL

Hey federico1954!
I have a link here for you that can take you to a troubleshooting assistant to help you troubleshoot this issue with your iPod nano:
Apple - Support - iPod - iPod nano (5th generation) Troubleshooting
http://www.apple.com/support/ipod/five_rs/nano5gen/
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Similar Messages

  • TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

    My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

    - After charging for 1/2 hour or so, does iTunes see the iPod?  If yes, restore the iPod from backup.
    - If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

    Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
    ''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
    BuildID: 20100914125854
    CrashTime: 1290192405
    EMCheckCompatibility: true
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536
    InstallTime: 1287124738
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 422
    StartupTime: 1290192405
    Theme: classic/1.0
    Throttleable: 1
    Vendor: Mozilla
    Version: 3.6.10
    This report also contains technical information about the state of the application when it crashed.''
    Same thing happens when i click restart.
    No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

    Did the crash reporter send any crash reports?<br />
    You can see the crash reports in this folder:
    "C:\Users\&lt;user&gt;\AppData\Roaming\Mozilla\Firefox\Crash Reports"
    See: http://kb.mozillazine.org/Breakpad
    See also [[Firefox crashes when you open it]]
    Create a new profile as a test to check if your current profile is causing the problems.<br /><br />
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]<br /><br />
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"<br /><br />
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br /><br />
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox<br /><br />
    If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data when uninstalling.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    See:
    * http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

    After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

    Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

  • New Macbook Pro does not start up after updating...HELP!!!

    Hi,
    My new Macbook Pro does not start up after it got updated. The first time I used it, it was perfect. I updated it and restarted it when it told me to but it doesn't boot. It shows an apple and a spinning circle when it turns on but that's it.
    Can somebody please help me?

    You should probably post your question in the MacBook Pro discussions:
    http://discussions.apple.com/category.jspa?categoryID=190

  • IPhoto does not start up after upgrading

    On my new iMac iPhoto does not start up after migrating. Upgrade from iPhoto 6/Snow Leopard > Lion 10.7.1 with iPhoto 9.1.5. When the conversion is finished I can see the new library, it works allright. And with packet-inspection (or how is that called in English) all maps & data seems to be OK; I can check the seperate pics.
    But: iPhoto won't start up a second time (grey screen with infinite spinning wait cursor). The same thing is happening when I add a new library and drop in some pictures.
    What can cause this problem?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • My ipod nano 6th generation does not start on pressing the sleep/pause button  or pressing both sound low and sleep pause button.it starts while connected to power it is fully charges

    i have an ipod nano 6th generation .version 1.2 yesterday i  restored it on i tunes  using my system window 7. for the last few days it does not start when the sleep/pause button is pressed.or even by pressing the both button sleep/pause and sound minus..It starts while connected to power. and then continues working. I can not put off it and it automatically goes off after some time its performance is ok  after starting by connecting to power and then disconnecting the cord.
    what would be the reason and what to do?>

    Call Apple Care as you are still under warranty.  

  • My ipod nano of 3rd generation is not recognized for windows or itunes.

    Hello,
    One week ago, i bougth an Ipod Nano of 3rd Generation.
    And still cant get it work.I already installed the LAST version of Itunes. And when i connect my ipod, itunes doesnt recognize it, and in the taskbar in windows, it says, new usb mass storage, then i click, and start searching something, then it says that it havent been found, that i insert a disk with xp label.
    I had tried resetting and nothing.im using Windows XP Pro 2002, with SP2.
    What would be the problem please help me!

    I have the same problem except through Vista. If iTunes isn't on my computer everything is listed as fine in windows device manager but as soon as I install iTunes it installs a problem driver for the iPod and device manager lists it with a yellow icon with an exclamation mark. I have to do my syncing on my old XP machine

  • My ipod touch does not start up after resetting

    my ipod does not turn on after I reset it. It shows an apple logo and flicker white screen until the battery goes dead.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

    Hi,
    I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
    Tried manually start services, it started successfully but again goes down within few seconds automatically.
    Reboot server. but no luck.
    Any help.
    MD

    Hi,
    I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
    In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Xfce4-power-manager does not start, but after relogin - works

    Hi all.
    When I login after system start, xfce4-power-manager does not start and systemtray icon doesn't appear. But after relogin (not restart), the systemtray icon of xfce4-power-manager appears and power manager itself works correctly (if I don't relogin, notebook will shutdown after 10 minutes of downtime - that rule doesn't exist in xfce4-power-manager settings).
    Diff between two logs (before relogin and after, xfce4-power-manager --debug command)
    diff log_1 log_2
    35c35,36
    < TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 0
    > TRACE[xfpm-battery.c:150] xfpm_battery_refresh_visible(): visible=TRUE: ((XfpmShowIcon) SHOW_ICON_WHEN_BATTERY_PRESENT)
    > TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 4
    51d51
    < TRACE[xfpm-polkit.c:238] xfpm_polkit_free_data(): Destroying Polkit data
    System
    Linux gready 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64 GNU/Linux
    systemd 212-3
    xfce4-power-manager 1.2.0-6
    That bug start happening after one of last week updates. I don't have a package cache.
    Can anyone help me?
    p.s. sorry for a bad English.

    Yes, i'm actually running xfce4 (all other things from xfce4 group are installed).
    It starts from a login manager named LightDM.
    AcpiD installed as a dependency.
    logind.conf
    # This file is part of systemd.
    # systemd is free software; you can redistribute it and/or modify it
    # under the terms of the GNU Lesser General Public License as published by
    # the Free Software Foundation; either version 2.1 of the License, or
    # (at your option) any later version.
    # See logind.conf(5) for details
    [Login]
    #NAutoVTs=6
    #ReserveVT=6
    #KillUserProcesses=no
    #KillOnlyUsers=
    #KillExcludeUsers=root
    #InhibitDelayMaxSec=5
    HandlePowerKey=ignore
    HandleSuspendKey=ignore
    HandleHibernateKey=ignore
    HandleLidSwitch=ignore
    #PowerKeyIgnoreInhibited=no
    #SuspendKeyIgnoreInhibited=no
    #HibernateKeyIgnoreInhibited=no
    #LidSwitchIgnoreInhibited=yes
    #IdleAction=ignore
    #IdleActionSec=30min
    I turned off key handlers because I truly HATE when I press power button and a notebook doing shutdown after that.
    Last edited by theperfectblance (2014-04-17 06:57:32)

  • Itunes does not start anymore after upgrade to 6.05.20

    I upgraded itunes to the current version and after that itunes does not start anymore. I scanned for virus with an up-to-date scanner, scanned for adware with Windows defender and ewido and used the tips from http://docs.info.apple.com/article.html?artnum=42963
    I run itunes on Windows Server 2003 which worked fine for three years. I know it is officially supported on XP only.
    I deinstalled itunes and reinstalled afterwards no change. The windows event log shows some erors
    Faulting application iTunes.exe, version 6.0.5.20, faulting module shell32.dll, version 6.0.3790.2662, fault address 0x0015af84.
    Any other idea?
    Thanks
    Christoph

    ok, so I am not sure if this is legal or not, but there is a site called oldversion. Go there, and you can get past versions of applications such as aim , and in this case, itunes. just uninstall your other itunes first.
    Sometimes different versions of appications run better on different computers. this new itunes probably just has something the last one didnt that cant run with what you have on your computer

  • Satellite A series does not start up after BIOS update

    After bios update with downloaded utility my notebook does not start up.
    Did this case covered by warranty?

    Im not quite sure if this would be covered by warranty. You should contact the ASP in your country for details but I presume its not covered.
    PS: Did you try this workaround:
    - remove battery, disconnect the AC adaptor
    - wait ~ 40min
    - connect both devices again and try to power up the notebook

  • Please help. ive bought a second hand ipod nano, when i connect it to my  pc it recognises it as a sigma mass usb device, yet its a 8gb ipod nano,and i tunes does not recognise it, im running on windows vista basic yet my own 80g classic ipod runs perfect

    please help. ive bought a second hand ipod nano, when i connect it to my pc, it does not recognise it in itunes,yet it comes up as a sigma mass usb device. its an ipod nano 8gb?. im running on windows vista,my own ipod classic runs fine.

    there is a good chance that this can be related to bad contact in USB lead.. e.g not enough power from IPOD to PC so that pc cannot recognise it. Where I work I get alot of USB devices on pc's that are not recognised and most of the time it is the connection to the device that is not good enough because the flat end of the USB adapter has been gradually bent over time just slightly and now contact is not good. It can also be todo with drivers or If you are using it through a USB hub.
    so if it is not working through USB hub try direct. also try in back of PC as these Ports or direct access to main board to pc and would be less trouble some if there was a voltage loss from mainboard in pc to front of unit.

  • IPod Nano 3rd gen 8GB does not show music library, can't restore in osx.3.9

    I have two problems: Although, I can see mu iPod's music library when I plug in it into my ancient laptop (iBook G4 10.3.9), the library doesn't display on the iPod once it's disconnected, meaning I can't play any songs on the iPod proper). I've done everything that the Apple website recommends for troubleshooting my Nani 3rd generation, including attempting to reset it repeatedly. I've now saved the songs elsewhere, and I'm prepared to restore it, but I can't seem to find a way to reset it in iTunes 4 (apparently the latest version of iTunes that will work on this computer). Am I missing something? What should I do? Any help would be much appreciated.
    Best,
    Diane

    Hey there,
    If your iPod is a 3rd generation nano, it will not work with anything below 10.4 as outlined in this Apple support document. That could be the underlying problem. Hope this helped.
    [iPod nano (3rd generation) - Technical Specifications|http://support.apple.com/kb/SP14]
    B-rock

Maybe you are looking for

  • What is the diffrence between DR and SMI processes?

    Actually when i say DR process is for comparision purpose and SMI is for actual replenishment purpose people are not getting convinced,i am requesting you experts to  come up with a better answer with an example . thanks in advance, Nandan

  • UK Payroll tax code 1000L

    Hello Friends:   In UK Payroll new tax code 1000L I have updated in Constant table V_T511K effective April 06th 2014 but this code is not going to Ceridian interface(PU12).   Any help is appreciated. Thanks in Advance

  • Can I print a pdf file from an email on an HP printer Deskjet 5100?

    Can I print a pdf file received through Email on an HP Deskjet 5100 printer and how?

  • Assigning Bean to a jsp variable

    The following is code for my bean: package com.brainysoftware; public class CalculatorBean2{ private int memory1; private int memory2; public void setMemory1(int  number) {    memory1=number; public  int  getMemory1( ) {    return  memory1; public vo

  • I removed App store application on my MacBook Air, how do I get it back?

    Hi there, I removed my App store from my mac and now I can't find anywhere a link to download it again. I am using OS X Yosemite 10.10 and would appreciate any help guys! Best regards, Svetoslav K