My iPod nano 6 generations button broken

hi i how my ipod under a year ago now and the button that switch it on is stuck in what can i do to get it working again or swop it for a different one?

If you bought it under a year ago, it has warranty. Go to a local Apple Store and they'll swap it for you.

Similar Messages

  • IPod Nano 6th Generation Volume Button Issue

    The "-" volume button on my iPod Nano 6th generation is stuck in the "on" or depressed position against the case. It looks like the button either is binding against the case, or a spring-like mechanism beneath the button is broken.
    Any ideas on how to fix the issue short of taking it in for a service appointment?  Maybe by opening the case?
    A

    If you open it or have a 3rd party repair site work on it you will no longer be eligible for an out-of-warranty replacement from Apple at a price of $65/$75 (make a Genius Bar appointment before going.
    You can buy the switch and replace it but be sure you are up to it. Check http://www.ifixit.com for teardown instructions.

  • The volume increase button is stuck on my iPod nano (6th Generation) and I can't turn the volume up. Is there a way to fix it?

    I have the iPod nano 6th generation, and I have had it since Christmas 2011 so it isn't that old; recently I went to listen to my music and found that the volume increase button is stuck (basically it's like when you press the volume button down to increase the volume, except it is stuck down like that and won't come back up) but it was only stuck about 3/4 of the way down. For about a week this was ok, I just had to press the button harder to make it go down and increase the volume, but now it won't increase the volume at all and it feels and looks as though the button is stuck the whole way in, even when I press the button with some force. I was wondering if anyone knew how I could fix it or if I need to take it to an apple store for them to fix it?!
    Sorry if the way I have explained the problem is confusing, it's difficult to explain but it's extremely frustrating.

    This happened to me a few weeks ago.  Instead of taking it to the Apple store and paying $ the 99 service charge ( I did give Apple 139.00 13 months ago! for this ipod), I saturated the end of a q-tip w/ WD 40 and carfefully rubbed around the perimeter of the power button.  I waited a half hour and then cleaned of the excess WD 40.  This unstuck my power button.  I guess the WD 40 dissovled all the dirt under and around (also the consrtuction of the buttons is done w/ double sided tape-- maybe a design issue) the button.  A friend tried isopropyl alcohol w/ great results.  Try this before you give Appple any more $$ or get a new ipod.  It's been 6 wks. and my button functions perfectly,

  • My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

    My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

    Sounds like the battery is shot and in need of a replacement.  You can have Apple replace the battery for a flat fee or you can send it into a third party repair center for a bit less.
    Not much else you can do for troubleshooting this one.
    B-rock

  • My ipod nano 6th generation does not start on pressing the sleep/pause button  or pressing both sound low and sleep pause button.it starts while connected to power it is fully charges

    i have an ipod nano 6th generation .version 1.2 yesterday i  restored it on i tunes  using my system window 7. for the last few days it does not start when the sleep/pause button is pressed.or even by pressing the both button sleep/pause and sound minus..It starts while connected to power. and then continues working. I can not put off it and it automatically goes off after some time its performance is ok  after starting by connecting to power and then disconnecting the cord.
    what would be the reason and what to do?>

    Call Apple Care as you are still under warranty.  

  • I have an iPod Nano 6th Generation for just over three months and the down volume button is sticking.  Does anyone have a recommendation for resolving?

    I have an iPod Nano 6th Generation for just over three months and the down volume button is sticking.  Does anyone have a recommendation for resolving?

    Dont buy this model again, this is the most common problem and i have gone through 4 of these 6th gen nanos all with the same problem.  You can find youtube videos that show you how to fix it yourself but you run the risk of breaking your ipod, also opening the ipod voids any warrently.

  • Why is damaged the power button on the iPod nano 6th generation?

    Hello everyone,
    Is the second time this happens to me with the ipod nano 6th generation, can someone tell me, why is damaged the power button?

    You may not intentionally be doing anything. The device is small enough to fit in your pocket and perhaps something in your pocket is causing the damage. Maybe even the pocket itself when inserting or removing the device as the power button may snag on the pocket opening.

  • HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

    My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
    I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

    Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
    Sounds like a repair issue, which is not easy to do in India :(

  • I still have my iPod Nano 3rd generation, but my old computer crashed and I did not have itunes backed up, so I lost my library. Is there a way to get the songs from my old ipod to new computer library and then on to the new ipod?

    I still have my iPod nano 3rd generation, but my old computer crashed and I did not have itunes backed up. Is there a way to get the music from ipod to new computer library and then on to the new ipod ?

    Save all the photos from your Droid into a folder on your computer.
    Connect your device to your computer. On iTunes left Pane, select iPhone under 'Devices'; then on the right Pane, select PHOTO tab.  Make sure Sync Photo box is checked, and "from" box selected the folder that has Droid's photos.  Then click the SYNC or APPLY button on the lower right window.

  • IPod Nano (4th Generation) switches on when connected to USB power - shows Menu & hangs (unresponsive to click wheel) - deems off after 5-sec - Switches off after disconnecting from USB Power - syncs with iTunes - Tried 5R's - Problem still persists

    1. The iPod Nano (4th Generation - 8GB) switches on, only when connected to USB power by showing apple logo and displays Menu options thereafter..
    2. However, I can not access Menu as it is unresponsive to click wheel. As a result it is inaccessible to any further use, 
    3. NOTE: it displays "Battery Fully charged" icon on the screen without any "Lock" icon.
    4. After  5-sec to 10-secs the screen deems off.. i.e. goes to sleep mode.. And thereafter would probably remain like that (sleeeping) for eternity!!!!
    5. It Switches off after WITHOUT DISPLAYING any Apple Logo immediately after disconnecting from USB Power.
    6. In other words, it can be switched on only through USB power in spite of battery being fully charged.
    7. Interestingly, it syncs with iTunes. It is recognised in iTunes (Latest version 11+).. Displays on screen all commands Like.. syncronising, connecting, connected,
    8. Allows to add Music, videos like a normal ipod & displays all status information in iTunes.
    9. Read Trobleshooting & Tried all 5R's. Registered, Resetted, updated & Restored to iOS 1.0.2
    10. It is now displaying to select Language in place of Menu options, with no access through click wheel, centre button whatsoever... Problem still persists
    KINDLY GUIDE ME THE SOLUTION. APPRECIATE YOUR RESPONSE in advance...

    "I get the feeling that this is a software issue that could probably be solved quite easily"
    Since you have already tried all the normal troubleshooting solutions, take the iPod to your nearest Apple Store for a *proper diagnosis.* The staff there will be able to confirm if your problem is software or hardware _*at no cost to you.*_
    !http://i50.tinypic.com/izvwo1.gif!

  • IPod Nano 6th Generation Not Charging/Holding Charge

    Hi.
    My iPod Nano 6th generation will not charge or hold a charge. I plug it in and it will turn on for about 30 seconds or less and then die. It will then continue to turn on and die unless I unplug it in which case it will die and not turn on. Any advice/suggestions and/or help finding what is wrong would be greatly appreciated. Thank you in advance.

    hold down the enter button for 5 secs then plug into wall while still holding it down.

  • My ipod nano's power button is stuck?! What should I do?1

    I got my ipod nano 6th generation for christmas. It's been working fine the past months I had it but then suddenly this morning, I found the power button stuck! :/ What should I do?!?!?!

    Schedule an appointment at your local Apple Store/Genius Bar and see if there is anything they can do to help. If they find that the problem is not the result of abuse, they should replace it under the 1 year warranty against manufacturing defects.
    B-rock

  • My iPod Nano 7th generation is not detected in Itunes

    Hey there,
    I have a iPod Nano 7th generation and I'm working with a Windows 7 64-bit version.
    So when I got my iPod, I installed iTunes and everything went very well..
    but today I tried to sync my iPod and it is not even detected from my iTunes or my computer.
    I had the error -42110, but I found the solution on here, but it didn't work either.
    I went through a lot of questions on here, but I couldn't find any solution for my problem
    Has anyone got any idea?

    well actually I did connect my iPod 3 days later or so to my charger, because a friend of mine asked me if I'm sure that the cable is not broken. So I connected it and it charged, when I thought "Well let's try on the computer again". I plugged it in and it was detected again.. so uhm I don't really know why it did not worked the last times.
    So maybe try to restart your computer and turn off an on again the device and try it later on again.. maybe it will work then:)
    I'm sorry I can't help more!

  • Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.

    Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.  I have tried uninstalling & re-installing Itunes but this didnt help. 
    Does anyone have any ideas? 
    Thanks for your help.

    I think the problem is that the iPod got set to Manually manage music and videos.  It needs to be set up for automatic syncing again.  Just unchecking that Manually manage music and videos setting does not do it.
    In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen.  In the sidebar (along left side of screen), there are two headings (Settings and On My Device).  Under Settings, click on Music.  To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
    Check the box at the top for Sync Music.  That turns ON automatic syncing for music.  Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod).  Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below.  Then click Apply.

  • I have my ipod nano 5th generation and when i plugged it to my computer it is recognized but i cant do anything. On the ipod all i can see is a black screen with the apple sign! How can i fix this?

    I have my ipod nano 5th generation and when i plugged to my computer it is recognized but i cant do anything. On the ipod all i can see is a blackscreen with the apple sign! How can i fix this?

    Howdy Lumagofe,
    I was thinking that you may need to reset the iPod Nano, outlined here How to reset iPod http://support.apple.com/kb/ht1320.
    Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
    If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
    If that doesn't quite get the iPod going again, then it will need to be restored. Use this article to help with that Restoring iPod to factory settings http://support.apple.com/kb/ht1339.
    All the very best,
    Sterling

Maybe you are looking for