My ipod nano 6g don't turn on

I can not connect my iPod nano, it only works when connected to your computer, just take it clears and does not care more

See Here for Trouble Shooting
http://www.apple.com/support/ipodnano/troubleshooting/

Similar Messages

  • IPod nano version 6:  random turn off, volume controls don't work, does not turn off, skip does not work.  Two years old!  Next version of nano has no clip and same amount of storage.  I do not want to give up my version 6!

    iPod nano version 6:  random turn off, volume controls don't work, does not turn off, skip does not work.  Two years old!  Next version of nano has no clip and same amount of storage.  I do not want to give up my version 6!

    Make a Genius Bar appointment at your nearest Apple Store and pay $75 USD for an out-of-warranty replacement.

  • I accidentally washed my 6th generation iPod nano. It will turn on still but now it has a computer screen setup on the screen, is there a way I can get it back to normal?

    I accidentally washed my 6th generation iPod nano. It will turn on still but now it has a computer screen setup on the screen, is there a way I can get it back to normal? I can plug it into my computer and it works and I've click the restore button that comes under the nano's summary when it's plugged in. Any type of help would be greatly appreciated. Thank you!

    Take your iPod Nano back to the Apple Store.  Let them see what you are seeing.  Only this time............
    Prior to leaving the Apple Store:    ***Make sure you have the store staff power the iPod Nano up and demonstrate that it is indeed working properly to your satisfaction.***

  • My ipod nano 5th gen. wont turn on and is not being recognized on my mac or itunes

    my ipod nano 5th gen. wont turn on and is not being recognized on my mac or itunes

    What have you tried so far in terms of troubleshooting?  After leaving the Nano to sit and charge for at least 30 minutes, try resetting it by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear. You'll want to make sure the Hold Switch is not in the On position as well.
    B-rock

  • I accidentally press Off  the Backlight in my 3rd generation  iPod Nano, how can I turn On the Backlight again?

    I accidentally press Off the Backlight in my 3red generation iPod Nano, how can I turn it On again? Appreciate any help. Thanks.

    What do you mean you turned off the backlight?  How did you do that?
    Have you tried a hard reset to see if that takes care of it?  To this, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • I have a Ipod touch that don't turn on and when connect to itunes, it's recognize

    I need Help!!!
    I have a Ipod touch that don't turn on and when connect to itunes, it's recognize

    I tryed but it isn't work, it like death, but when I connect to Itunes it is recognize like a Iphone, but without more information, just the name= Iphone and the other thinks are capacity software serial number N/A.
    And when i try to rest isn't Work
    (Thank for your help)

  • My iPod Nano buttons don't work...

    My iPod Nano buttons don't work even tho my Hold button in off when I switch my Hold button from ON to OFF my iPod shuts off then restarts by itself. My iPod is fully charged. I have updated my iPod to the latest update. I've tried to restart my iPod many times but since the buttons don't work it doesn't happen.

    If you've reset and restored and the buttons still don't work, then it needs service. Either take it along to an Apple store, or send it in.
    http://depot.info.apple.com/ipod/

  • My ipod nano 3 generation keep turn in and off even the hold botton is in on possicion can anyone help me with this ?

    my ipod nano 3 generation keep turn in and off even when the hold botton is in on possicion can anyone help me with this please?

    iPod Manuals

  • Ipod nano 7th gen not turning on or connecting to laptop??

    My son's ipod nano 7th gen won't turn on and when I connect it to the lap top a message comes up saying device driver not recognised - he was listening to it just last night, can anyone help? He's only had it since his birthday in November.

    I reset the ipod by holding down the power button and the menu button and the apple screen came up after a few moments - this seems to have done the trick!

  • Ipod Nano 4th Gen wont turn on.

    My Ipod Nano 4th Generation will not turn on. I plug it into my computer and get nothing, i tried resetting it and that did nothing. I then plugged it back into my computer and i got an error message on Itunes saying that my Ipod was corrupt. I know can not get Itunes to recognize my Ipod, even for a 'corrupt' message. I have had my Ipod for over a year now and wondered if anyone els had had this problem and even better knew a way of fixing it. I cant afford a new Ipod and need one for work. If anyone could help me i would be very grateful. Thanks.

    I have the same problem. I've had mine since Christmas and when I went to listen to it today the screen just shut down and it's unresponsive to anything. Even being plugged in to my computer. The only thing it does it make a clicking sound when I take it off hold.
    I've also done the Five R's and none of them worked.

  • HT201210 ipod nano 6g doesn't turn on and won't be recognized by itunes

    Hi, I bought an iPod Nano 6g a couple of years ago.
    I tried to use it about a week ago. It did not turn on (not even the screen), no music, nothing!!
    I connected it to my Laptop (Mac), turned the iTunes on, nothing again!! It didn't even recognized it.
    I have connected it directly to the electricity, no charge!!
    I downloaded the iPode Reset Utility, but since my Laptop doesn't recognize it, I don't know what to do.
    Please advice!!

    How long have you left it to charge?  It can take up to at least 30 minutes (sometimes longer) for the iPod to show any signs of life.  After leaving it to charge for a few hours, try resetting it. To do this, press and hold both the Sleep/Wake and Volume Down buttons together long enough for the Apple logo to appear.
    B-rock

  • I have a 4th or 5th generation iPod nano (I don't know which) but I want to transfer all of my music into my new laptop's iTunes library but I can't lose any of it because I don't have a back up. How do I do this?

    I have an iPod nano and a new laptop. I just got my first Apple id and I really want to transfer all of my iPod music into my library. I don't have any back up and can't lose some of this music because it was a gift from an ex-boyfriend and I don't want to lose the great music. Please help me! Thank you!!

    You can deauthorise all 5 at once, then reauthorize the one you want.
    Learn how to authorize or deauthorize your computer with your Apple ID.
      http://support.apple.com/kb/HT1420
    You need to log into iTunes on the computer you want to deauthorise. Otherwise, contact contact iTunes Store support to see if they can help.

  • I have a new 2nd generation ipod nano and its not turning on! help please!

    i got it two hours ago and its not charging really.. cuz its been plugged into my computer for at least an hour straight... its not turning on or making any sign on the screen
    ive also downloaded itunes
    and i cant sync to ipod .. nor is it on my computer place
    so basically i think its not installed.. which means i need to install it but i dont know how .. cuz when i plug it in nothing pops up and my ipod isnt turning on either
    help help
    BENQ FP718   Windows XP  

    First, your iPod may need to fully charge which can take a couple hours. You may benefit from downloading the 2nd gen nano manual if you haven't already. If after allowing it to charge for a bit longer and still no life (try this with the iPod ejected from the computer to see if it will power on) then there may be another problem.
    A few links that may be helpful also:
    The New User's Guide for iPod nano
    iPod 101
    iPod missing in "My Computer" or in iTunes for Windows

  • IPod Nano 7th gen not turning on but recognized by iTunes and Windows

    My two-month old 7th gen iPod Nano is not turning on. I've reset and restored it using both Windows (My Computer) and iTunes and have downloaded the and installed the latest version of iTunes. It was working fine and now just will not turn on. It is being recognized by Windows as a removable disc and by iTunes as an iPod that I can sync data onto.
    I've tried the 'hold the power button for 5 seconds' trick to try to manually reset it, as well as other variations with pressing down on the power and menu keys simultaneously. The iPod is new, ordered online and the nearest Apple Store is over 2 hours away from where I live.
    Please help?

    Hello, M.Ram.  
    Thank you for visiting Apple Support Communities.  
    I understand that the screen on your iPod nano is black, but is recognized by iTunes.  Take a look at the troubleshooting article below as it may provide some troubleshooting steps that may help.  However, if the issue persists, see the section labeled Issue not resolved.  
    iPod nano (7th generation): Hardware troubleshooting
    -Jason H.  

  • IPod nano 4GB won't turn on

    I bought a 4GB ipod nano for my girlfriend three weeks ago. The 060628 update was applied directly.
    After working fine for two weeks, now suddenly the only way to get it to wake from sleep is to perform a reset.
    Apart from this it seems to work normally: after "turning it on" (hold on/hold off, menu+select) all buttons work ok, it plays music, synchs with itunes etc. But after turning it off it becomes unresponsive to anything but the reset sequence.
    Tried the five Rs, restoring using the 2006-06, 03 and 01 updaters, and draining the battery completely.
    The guy at apple support said he'd not heard of anything like this before. It's going in for warranty service, but has anyone else encountered this problem?

    I am having the same issue with my Ipod Nano. I downloaded some new music last Thurs. Every time I tried to turn it on the following day, I had to reset it. The last time I used it was Friday night with an ITrip. I had to reset it for the Ipod to turn on, but once on it worked fine.
    I didn't drain the entire battery out of it that night and haven't been able to turn it on since. I have tried everything but restoring the Ipod. When I try to reset it, nothing. When I try updating the software, nothing. When I plug it in to my computer, nothing. I took my USB cord to work thinking it was my computer and plugged it in, nothing. I have had it sitting in a Bose docking station, still nothing. What the **** is wrong with this thing? I can't restore it if I can't get it to turn on. PLEASE HELP!!
    PS- I have read through the forum and have tried the things people have suggested thus far. No luck with anything.

Maybe you are looking for

  • How to connect Satellite Pro L40-15A to my TV?

    Hi I would like to use the laptop connected to my TV to watch movies. Can it be connected using the TV as a monitor and what type of cable would you use? Thanks Malc

  • Please help me...Why the buttons size change?

    Hi!!! I have a doubt with respect the buttons size, because with the following code i show 2 buttons that comprise the whole panel in a row: import java.awt.*; import java.awt.event.*; import javax.swing.*; import javax.swing.tree.*; import javax.swi

  • Profile and Speed Reductions

    Hi, sorry for my first post here to be yet another one about slow Infinity speeds but I would really welcome some help and advice. I switched to Infinity from Total Broadband 3 in early November and initial tests showed my line profile for downloads

  • In yahoo mail, can I delete multiple messages at once?

    For example, I'd like to try to clean up my mailbox.  On an MS OS, I can do a search on "sears", everything with that word is displayed.  I can then delete them all at once, usually with just one click.  Is there something similar on a MacBook Air? 

  • Unable to uninstall last Exchange 2010 server

    Hi, I am unable to uninstall last Exchange 2010 server from the organization. I get error message: Summary: 3 item(s). 2 succeeded, 1 failed. Elapsed time: 00:00:19 Configuring Prerequisites Completed Elapsed Time: 00:00:00 Mailbox Role Prerequisites