My iPod nano (6th G)'s Sleep/Wake button got completely pushed in and I can not turn it on
Apple has nothing listed on what to do and I was wondering if anybody else did??????
Hmmm, if there are any tech stores nearby you can bring it to them. If not then heres an article related to your topic. I won't recomend opening the prodcut yourself unless you think you can put it back together. Remember if anything is broken then im not responsible and you might need to bring it to the apple store nearby and get it fixed (might cost a bit). Good luck!
-Manuel
Similar Messages
-
ipod does not respond when i press the sleep/wake button.
it only comes on when plug in to power supply or using the resetting method (pass and hold the sleep/wake & vol down button).
tried restoring and after restoring, ipod screen hangs, does not respond at all. same for sleep/wake button...
lost! can someone help pls!Hello Ryan,
Since it sounds like you have already tried all the usual and available troubleshooting techniques, I would make a trip to your local Apple store/Genius Bar and have them take a look at it. Your iPod is still under Apple's 1 year warranty that cover any defects (but not accidental damage!).
B-rock -
My nano (6th gen.) sleep/wake button is frozen. What can I do? I have owned this less than a year
I had a broken home button within 6 months and had it replaced. Now I have a broken volume up button less than a year later. They want $65 to fix with 90 day warranty. This is a major defect and they should have recalled these units. It is insane that they are still ignoring this problem and telling people to pay to have it fixed. I'm filing a complaint against Apple.
-
My IPAD won't turn on by holding the Sleep/Wake button at the top. It is plugged in and the plug is drawing power. Any suggestions? IT worked fine this morning.
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: You need to hold Sleep/Wake and Home button (2 buttons) down together -
I plugged my ipod nano 6th gen in to the latest version of itunes today and as soon as i plugged it it it turned on automatically as it should when i came back to it 5 mins later, picked it up and it felt warm and it wouldnt turn on. what should i do?
I have the same problem and can't seem to figure out what the problem is. I rebuilt my iTunes library and still my 6G nano crahes whenever I load an AAC tune onto it. MP3s and podcasts all work fine, it's just the AACs...
Just *loading* an AAC song will cause the Nano 6G to reboot as soon as it disconnects from Itunes. It will then reboot a few times and then go into recovery mode. :-(
Karen -
Is there a way to transfer my songs from my ipod nano to itunes on my new computer. My computer crashed and I do not have any back up.
http://www.yamipod.com/main/modules/home/
-
I plugged my iphone 5 to the charger as usual , then I went to sleep but when I waked up my iphone was OFF and I can not turn it on !!!?? please help
Never mind its woking now THANK YOU ANY WAYS
-
Newly replaced iPod Nano (6th generation) not recognized by iTunes on PC. Any suggestions?
Hi LaureltheVictor,
Thanks for visiting Apple Support Communities.
See this link for some additional troubleshooting tips:
http://www.apple.com/support/ipodnano/6th_generation/assistant/itunes/
Best,
Jeremy -
I updating my iPod nano 6th gen firmware 1.1 to 1.2 with iTune. But it is ok because an network error has occurred. How can i solve this problem.
Can I download iPod nano 6th gen firmware 1.2 update file without using iTune?
I want to offline update with iTune.Can I get firmware 1.2 update file.Universal Serial Bus controllers
Intel(R) ICH9 Family USB Universal Host Controller - 2934
Intel(R) ICH9 Family USB Universal Host Controller - 2935
Intel(R) ICH9 Family USB Universal Host Controller - 2936
Intel(R) ICH9 Family USB Universal Host Controller - 2937
Intel(R) ICH9 Family USB Universal Host Controller - 2938
Intel(R) ICH9 Family USB Universal Host Controller - 2939
Intel(R) ICH9 Family USB Universal Host Controller - 293A
Intel(R) ICH9 Family USB Universal Host Controller - 293C
USB Composite Device
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer. -
I have restored my ipod nano 6th generation and am being told it is now in recovery mode so needs to be restored which is what i have just done. I can't get any further than this. Please help.
Are you really running Windows 98? I sure hope not. :S
I have noticed a few others with the same problem the past couple of weeks. Many of them were able to resolve the issue by doing a low level reformat of the iPod's flash storage using the instructions in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock -
I lost all my old library in my ipod Nano 6th gen when trying to understand how to sync to new laptop. Can I get them back?
If they are gone, then your question is answered.
If you synced your ipod to a different computer, then the current content of the ipod would be erased.
You cannot sync the music from the ipod to the computer. It sync from the comptuer to the ipod.
If the music is gone, then it is gone.
Not sure how you think this didn't help you.
Your music is only where you put it. If you synced your ipod to another computer, erasing the ipod, then the music is not on the ipod any longer.
Not sure what else you are looking for. -
HT1212 Restoring Ipod touch with broken/unusable sleep/wake button
got a broken sleep/wake button and my kidz put a wrong passcodes on it many times, now it is locked, is there any way I can restore this back even if I don't have it backed up with my computer? I'm just using screen home button that is why I can't restore it using the ordinary way.
Place the iPod in recovery mode using one of these programs and restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella -
My iphone 4 has just stopped working after plugging it in to charge...
I have tried resetting the phone by holding down the sleep/wake and home buttons but nothing is happening... Help!http://support.apple.com/kb/TS3281
-
My ipod got in my washer and it will not turn on. What do I doo.
Help me.
If the iPod is now dry (placed in uncooked rice for a week)
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price -
hi, when i am listening music and the screen goes to sleep my music stop playing.Please help with settings
No problem. And no worries, several people have made this same mistake!
Either way enjoy the iPod!
Brock
Maybe you are looking for
-
Sales order information to be captured from a java based website
Sales order information entered in java nabled website needs to be retrieved into SAP system and a sales order needs to be created in this system. And as soon as a sales order is created an bdoc needs to be triggered and sent to the CRM system... Mid
-
Mouse Clicks stop working randomly
So far I have noticed several times on my Quad Core 27 inch imac that the mouse clicks stop working. This is with two different mice, plugged in together, so I know it's not mouse or driver related. It happens to both of them whenever it does happe
-
HDD crashed! How to install Tiger onto 867mhz G4 with no DVD drive??
Hi folks. My trusty 867mhz G4 Quicksilver Powermac drive has finally konked out. It was running OS 9.2.2 before. Now I want to install Tiger as the OS. Having only a CD drive (nope, can't read or write DVD's), how do I proceed to install Tiger (I hav
-
HI! I have a small network. I have 3 300-28 cisco switches. I already connected my 3 servers and clients with the switch 1 and now I want to add more clients and I need to add my other two switches in the network. Please guide me with the simple con
-
Difference or relation b/w ISU and CCS
Hi, Please explain the relation or difference between ISU and CCS Thanks and Regards