My ipod nano 6th generation is not working anymore :( HELP

I have an ipod nano 6th generation. Was working perfectly. One day I wake up and is showing me a screen I have never seen before..It reads:N20 Snowfox 4A0432
When I plug it, itunes doesnt recognize it. It recognized it once but it says problem 1621 and I follow the instructions but still my ipod is frozen and not even my computer can read it.
I really miss my music for my morning run!

Have a look at comment # 4 and 5 on this page iPod nano 6G diagnostic mode to get it out of this mode again.
Pressing the volume minus button and power button should help.

Similar Messages

My ipod nano 6th generation will not work connected to my car radio?

my ipod nano 6th generation will not work connected to my car radio? My wife's ipod nano 4th generation works perfectly.

Hey CorineNL,
If your iPod not recognized by iTunes or computer, I would follow the directions here:
Follow this troubleshooting assistant.
Also see these articles for further assistance:
iPod not recognized in 'My Computer' and in iTunes for Windows
iPod not recognized in iTunes and Mac desktop
from: iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
Welcome to Apple Support Communities!
Best,
Delgadoh

HT1369 IPod Nano 6th generation sync not working

I've run all the diagnostics, troubleshooting, reset the device. Device shows as being connected to computer and network. But, fails sync test. Help!!...Thanx...Michael

If a restore of the device to factory settings in iTunes, did not resolve the issue, it points to a hardware issue with the display's backlight. This means you'll need to take or send your iPod in for service either to Apple or a third party service. Here is Apple's pricing.
http://www.apple.com/support/ipod/service/prices/
Google "iPod Nano repair" for third party service centers who would actually replace the damage part.
B-rock

The power button on my iPod Nano 6th Generation is not working. Any suggestions?

Is this worth repairing?

Depends on how you do it and how much you like the size and the clip.
An out-of-warranty replacement at your nearest Apple Store (make a Genius Bar appointment before you go) will cost your $65/$75 USD depending on the size of your Nano. You can find a 3rd party repair site that will do it for less buy you won't be able to do an out-of-warranty replacement if something else fails.

My ipod nano 6th generation will not turn on.

My iPod nano (6th generation) will not turn on. I have charged it (attached to my computer) for 30 minutes. I have tried to reset it (held down Wake and Volume Down for 8 seconds)- no response. I have factory restored it (through iTunes)- no response. It shows up as connected to my computer and will sync in iTunes, but the display on the iPod will not turn on. Any ideas?

Hey s.mccarter2010,
Thanks for the question. After reviewing your post, it sounds like you have tried a lot of things and the iPod still will not turn on. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iPod won't turn on
If you have tried the solutions above and iPod still won't turn on, check the following:
Make sure iPod is the only device in your FireWire or USB chain. Disconnect everything but the mouse, keyboard, and your iPod, then see if it will turn on.
Make sure you are using the FireWire or USB cable that came with your iPod, and that the cable is in good condition.
Try connecting iPod to the built-in port of a different computer to see if that works. Note: If using a portable computer, make sure it is plugged in to a power source and that the lid or display is open. If the lid is closed the computer may go into either standby, sleep, or hibernation mode and iPod will not charge properly.
If you still can't turn iPod on after performing these steps, it may need to be repaired. You can arrange for repair at the iPod Service Website.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

HT1459 MY IPOD NANO 6TH GENERATION WILL NOT TURN ON I GOT IT FOR CHRISTMAS AND PLAYED THE RADIO ON IT WITH OUT PLUGING IT INOT ITUNES AND I WAS WONERING HOW TO FIX IT ?

hi my ipod nano 6th generation will not turn on what should i do ...no batery left and never pluged it into itunes

Hi meganisawsome,
If your iPod will not turn on and you are getting indicators that there is no battery left, the first step would be to make sure that the iPod has been charged correctly. You may find the following article useful:
Apple Support: Charging your iPod battery
http://support.apple.com/kb/HT1384
If you are still having issues after charging, you may want to look at this article:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
Regards,
- Brenden

Any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station pls

any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station please ? classic working fine, so not the fault of the station itself ? it's been bought as a present for my father & he's confused !

Check the headphone jack with a flashlight and clean it if necessary. The jack on a new Nano is very tight, be sure you push the headset jack all the way in, the plastic on the headset jack should be flush with the body of the Nano.

Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is

Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is plugged into itunes. Can't even restore it. I get Error 1415?

Hi clarity,
Welcome to Apple Support Communities.
You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
Best,
Jeremy

My ipod nano 6th generation does not start on pressing the sleep/pause button or pressing both sound low and sleep pause button.it starts while connected to power it is fully charges

i have an ipod nano 6th generation .version 1.2 yesterday i restored it on i tunes using my system window 7. for the last few days it does not start when the sleep/pause button is pressed.or even by pressing the both button sleep/pause and sound minus..It starts while connected to power. and then continues working. I can not put off it and it automatically goes off after some time its performance is ok after starting by connecting to power and then disconnecting the cord.
what would be the reason and what to do?>

Call Apple Care as you are still under warranty.

My ipod nano 6th generation is not syncing the videos, can any one help me

Hi,
My ipod Nano 6th Geeration is not able to sync the videos from itunes library, please help me out on this.

Videos are not compatible with a 6G Nano. Sorry.
B-rock

Ipod Nano 6th Generation will not turn on.

My brother bought my mother the new Ipod Nano 6th Gen as a gift yesterday. We plugged in to charge (like the instruction booklet says) and found the Ipod wasn't turning on. Everything on the computer and syncing side works. We managed to register the Ipod and everything like that but when it comes to controlling the actual Ipod, it doesn't seem to be working.
I have tried resetting (Volume Down Button + Sleep/Awake Button) it but still nothing.
The repairing Ipod has been cast on me which is unfortunate because my mother doesn't take things breaking very well and I would rather sort it out for myself than have to hike up to my nearest Apple Store for the Genius Bar to look at it.
I would like to know if this is a problem with the screen or with the actual power in the ipod.
The tiniest of help and I would be very greatful. thanks,
Ross Jordan.
ps. it has been charging for a good 3/4 hours now.

If you do a restore on it from itunes on your computer and it still does not work....then it's a defective unit and you'll have to take it in for an exchange.
Try to restore first before taking it in.
Here is how you do it:
http://support.apple.com/kb/HT1339
Good luck!
M.

IPod nano 6th generation doesn´t work

I´ve got a new iPod nano 6th as an exchange unit. It works fine till i connected it with iTunes under Win7. First, the iPod appears in iTunes and a window was opened, i think, to accept the license rules. Unfortunetly i was distracted for about 5 minutes. By next gaze to iTunes, the iPod was disappeared, the license window was disappeared and the iPod was black. Unfortunetly i have tried to reset the iPod without disconnecting. Nothing happens. I disconnected the iPod, and it doesn´t works no longer. A reset between 8-15 seconds doesn´t help. An attempt to come into maintenance mode was failure. A new installation with complete delete before of all apple files couldn´t help. A deactivating of virus scan didn´t help. Other usb-cables, other PC´s even a mac didn´t help. A delete of the recovery.ipsw doesn´t help. The iPod doesn´t appear neither under windows or in iTunes. The strange thing is, by connecting with the pc, opening iTunes and an attempt to reset by 8 seconds, nothing happens. By connecting and an attempt to reset by 15 seconds, iTunes recognized the iPod, is waiting for the iPod about 30 seconds and reports, iPod recognized but not really identificated. Error 1601. If i try the reset by about 15 seconds without opened iTunes, then appears an apple mobile device under usb in devicemanager, but anyhow, no access. I´ve read, an older mobile device driver could help. I´ve extracted this driver out of iTunes version 10.5.2, deinstalled the newest driver and installed the older. It hasn´t helped. I could cry. By the way, my old iPod 2. gen works fine. I would by happy, could i get a solution. thanks a lot.

torinta wrote:
the nano screen comes up with a message 'do not disconnect'.
Do not reset your iPod if…
If your iPod is connected to a computer and displays any of the following messages, you should eject the iPod from within iTunes instead of resetting it:
Connected. Eject before disconnecting
Sync in Progress. Please wait…
Do not disconnect
Tip: Check out this helpful movie, too. ( http://support.apple.com/kb/HT1320?viewlocale=en_US )
Try the below steps :
If you can see your iPod in windows explorer on your My Computer the Right click on your iPod and Format it in Fat32 Format once it is formatted completely remove it from your computer and then reconnect it and open iTunes on your computer and Restore it using iTunes and if your iPod is not appearing in iTunes then Put your iPod in disk mode by referring the Above steps and then try to Restore your iPod to Factory settings.

Ipod nano 6th generation is not recognized by iTunes. How do I fix this??

I bought an Ipod nano 6th Gen. yesterday and I am not able to connect to iTunes. It is not recognized.

What version of iTunes are you running?
Allan

My iPod Nano 6th generation will not turn on when off of the a power source. I've tried to restore it, but that didn't work. Any suggestions?

I also tried holding the sleep/power button along with the minus button to reset it and that did not work either. Any help would be great, thanks.

If you update the iPod software to the latest version (1.1) you should be able to power off the iPod. If that doesn't work especially since you restored it's most likely a hardware issue with the iPod. If so, contact AppleCare or visit an Apple Retail Store so they can setup a repair for you.

My iPod nano (6th generation) will not sync because of Error 13019.

Why won't my iPod nano sync? Error 13019 keeps showing up. I've tried to sync over and over. Help me!!

See here: iTunes: Error 13019 during sync
Some users have had luck by rebuilding their iTunes library.
iTunes: How to re-create your iTunes library and playlists
B-rock

My ipod nano 6th generation is not working anymore :( HELP

Similar Messages

Maybe you are looking for