My iPod Nano 7's Driver is coming up with a code 10 on Win7.

My driver isn't working for my iPod Nano 7, and I know this because I was trying to update the driver for my phone. It won't charge on this laptop, and it won't show up in iTunes. I have the necesary updates, but nothing is working. Do I need to update my driver? Please help me out here.

Ok, so now it's displaying a code 43, and has "Unknown Device" on it. So I did what it told me to on troubleshooting, but it says "
If the hardware ID displayed starts with this:
USB\VID_0000&PID_0000
This means that Windows cannot read the hardware IDs of the device, and so has replaced them with all zeros. This is typically caused by a faulty USB connection, or an incompatibility with your USB chipset drivers."
So then, what do I do if it displays "USB\UNKNOWN"?

Similar Messages

  • My iPod doesn't sync it keeps coming up with the message "The iPod 'iPod Nano' cannot be synced. An unknown error occurred (13019)." What does this mean and how can I fix it.

    My iPod doesn't sync it keeps coming up with the message "The iPod 'iPod Nano' cannot be synced. An unknown error occurred (13019)." What does this mean and how can I fix it?

    I am getting the same error message. Have you figured it out?

  • HT5621 My daughter was 9 when she got her iPod nano and I created an Apple ID with my details. I now have an iPad and iPhone and she has an iPhone too, how do I change it so that she has her own ID without her loosing all her music.

    My daughter was 9 when she got her iPod nano and I created an Apple ID with my details. I now have an iPad and iPhone and she has an iPhone too, how do I change it so that she has her own ID without her loosing all her music.

    Follow these instructions
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • TS1363 "An iPod has been detected but it could not be identified properly"  iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

    "An iPod has been detected but it could not be identified properly"  iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

    Hi cueball819,
    Thanks for using Apple Support Communities.  This article has steps to try if your iPods aren't recognized by iTunes or Windows:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Ari

  • Ipod nano 5 resets but won't sync with itunes on two different pc's

    ipod nano 5 resets but won't sync with itunes on two different pc's

    What happens when you try? Does the iPod even appear in iTunes?  Have you tried a different cable or different USB ports on each PC?
    Need a little more information.
    B-rock

  • Is there a way to use my iPod Nano to listen to a radio frequency with wireless headphones.  It tells me that I have to plug in my headphones to receive the stations and when I do, the wireless headphones don't work!

    Is there a way to use my iPod Nano to listen to a radio frequency with wireless headphones.  It tells me that I have to plug in my headphones to receive the stations and when I do, the wireless headphones don't work!

    No. I'm sorry. But, i think it uses the headphones as an antenna so it has to be plugged in to headphones in order to make it work. but, it burns the battery down so i don't use the radio function that much.

  • Does my ipod nano first generation usb cord that came with my ipod nano first generation when i bought it work with my new ipod nano sixth generation?

    does my ipod nano first generation usb cord that came with my ipod nano first generation when i bought it work with my new ipod nano sixth generation?

    ok thanks i didnt know if it would fry the battery or not when i charged it

  • My Ipod nano 6th gen shows a white screen with sad face

    Hi
    My ipod nano is showing me a white screen with a sad face on it
    I tried to reset it but with no use, everytime it resets, it returns back to the sad face
    and itunes won't recognize the device
    this is a picture of the screen
    any help please

    While the nano is connected to your computer and iTunes is open, hold down the volume up, volume down and sleep/wake button at the same time until iTunes brings up a dialog then release the buttons.
    The dialog should walk you through 'recovering' the nano. See if that does it for you.
    Has it gotten wet?
    i

  • TS3694 my i pad is showing connect to i tunes picture when i connect to i tunes it tells me i need to restore, but when i do it keeps coming up with error code!! which is a different one each time can anyone offer some advise to solve this frustrating pro

    my i pad is showing connect to i tunes picture when i connect to i tunes it tells me i need to restore to factory settings, but when i do it keeps coming up with error code!!   which is a different one each time can anyone offer some advise to solve this frustrating problem.

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

  • TS3212 im trying to install iTunes on my new hp com and it keeps coming up with error code HRESULT:0x80070BC9 what do i do?

    im trying to install iTunes on my new hp com and it keeps coming up with error code HRESULT:0x80070BC9 what do i do?

    HRESULT: 0x80070BC9
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80070BC9, or some other number? (If they're another number, what number are you getting?)

  • IPod Nano 2g hard drive?

    Does the iPod Nano 2g have a hard drive or something else? I was curious b/c i was told if you drop it it could break it easily but I can't see how a h/d could fit in such a small device. Thanx for all help!

    It uses flash memory, not an HD.
    was told if you drop it it could break it easily
    Yes, you can break it easily. It is an electronic device.

  • HT4059 I have a 7th Generation iPod Nano and cannot get audiobooks to sync with it. The manual says this is a valid feature but I can't get it to work. Any suggestions?

    I am trying to sync an audiobook from iTunes to a 7th Generation iPod Nano. The manual says audiobooks can be synced to this device by going to iTunes, selecting the Book button and selecting sync audiobooks but when I select the Book button I do not see any syncing options to select.  What am I doing wrong?

    Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
    Above from:
    http://support.apple.com/kb/TS3694#error1611
    Note it could be a hardware problem

  • I have a 6th Gen ipod nano. Is there a compatability problem with Windows 8.1?

    My 6th gen ipod nano is not being recognised in itunes. I have tried all the suggestions in the itunes troubleshooting section without success. I am running Windows 8.1 , is there a chance of an incompatability problem here?

    I have tried all the suggestions in the itunes troubleshooting section without success.
    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • My iPod nano (1st gen.) doesn't communicate with my pre-installed iTunes

    I've had my iPod nano for just over a year now. It worked fine, including with my computer and iTunes, until my hard disk blew last summer. Since then, I've had trouble getting my iPod to work. Now I'm able to load it up with the Dock, and I'm pretty sure it's working normally.
    However, my problem is that iTunes, which I had already installed several months before I reconnected my iPod, as I had some free song vouchers which were going to expire, doesn't recognize my iPod. I'm pretty sure there's a way to connect an iPod up to iTunes when the latter had already been installed, but I don't know how. Also, I have a lot of music on my iPod which I no longer have anywhere else. MY question is:
    How can I connect my iPod up to iTunes (which has already been on my pc for a while) without losing any of the music on it?
    Dell Dimension 8200   Windows XP  

    Make sure all the songs in i-tunes are checked off (small box to the left of each song in the songs list), and click sync, or apply.

  • How can I turn off the volume limitor on my ipod nano?  I want to play it with a docking station, it is no where near as loud as an old 4GB ipod!

    Hello, please can you tell me how to turn off the volume limiotr on my ipod nano?  I want to play it on a docking station and it just isn't as loud as I want it to be.  An old ipod is much louder.

    I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection.  All this does is slow me down since I need to go back and hit those areas again.  The big arrowhead just get's in the way.  The original lasso tool with the thin line and small active point at it's lower left was far better for me.
    I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down.  If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
    I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
    Is there any chance this option could be inlcuded in cursor preferences?  I'd give much thanks, Adobe.

Maybe you are looking for