My ipod nano 7th gen has a minor glitch.

It works great, BUT for some reason it doesn't always play the next podcast automatically.  It's only on certain podcasts, and not on others and I can't find a setting to fix it.  It's a minor issue, but annoying.  I want it to play continuously, not be left with dead-silence when the podcast is finished.  If anyone can explain how to correct this, that would be appreciated. 
Thanks!

Hey MissC@t,
Although the following article says 6th generation, most of the troubleshooting steps should still apply to your 7th generation nano. I'd go through the troubleshooting steps and see if that resolves the issue:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
Have a good one,
Delgadoh

Similar Messages

  • Can any one advise me if the new ipod nano 7th gen has a sleep timer on it?

    I have just be giving a new style Ipod Nano 7th gen for christmas and wanted to know if it has the facility of playing music and setting up a sleep timer alarm so that it switches itself off after either 30min or 60mins?
    I have had an ipod nano 4th gen for about 4 years and it has this sleep timer facility on it which i absolutely love and use every night.
    So can anyone advise me on this and if it does still have this facility on the newer model that would be great and how i would go about setting it up on my new ipod nano 7th Generation.

    Thank you Chamar for replying to me, i will have a look at printing of the full manual and having a proper read throught it.
    Happy New Year to you all.

  • My ipod nano 7th gen has suddenly gone black and it wont turn on or connect to a power source.

    I was listening to my ipod nano 7th gen when it went black and the music stopped playing.  It wont turn on when i press the power button and when i connect it up to charge the screen doesn't turn on.  Can anyone tell me how to turn it on again or give me suggestions. 
    Much appriciated,
    MissC@t

    Hey MissC@t,
    Although the following article says 6th generation, most of the troubleshooting steps should still apply to your 7th generation nano. I'd go through the troubleshooting steps and see if that resolves the issue:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Have a good one,
    Delgadoh

  • My Ipod Nano 7th Gen has a blank white screen.

    I have tried to reset but still no change. even reinstalled the software. Is it time to return to an Apple shop?

    Let the battery fully drain. After charging for at least an hour try what you tried already. If it still has the white screen that indicates a hardware problem an appointment at the Genius Bar of an Apple store is in order.

  • Ipod nano 7th gen has has a blank white sreen? how can i fix this?

    turns on but only shows a white screen

    You can work through the remaining five 5 R's of troubleshooting.
    http://www.apple.com/support/ipod/five_rs/
    It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
    Otherwise, it's likely a hardware issue with the iPod's LCD display.  Since the device is still under a year old, it should still be covered by Apple's 1 year warranty against manufacturing defects.  They should exchange it out for a new one at no cost.
    B-rock

  • Ipod nano 7th gen problems synching

    hello,
    for the past 2 days, I have been battling an ipod nano synching issue. This ipod has been working flawlessly for the past year. And then all of the sudden, without warning, I tried to add additional music and I could not. I cannot remember the exact syntax of the error but it had something to do with the ipod not being recognized and required a restore to factory.
    I have corrected the first issue where the ipod was not recognized and had to be factory restored. Each time I restored, it would not be recognized by itunes.
    I installed itunes on another pc and the same ipod synched and reconnected just fine, pointing back to the itunes install on my primary machine.
    I resolved the first issue on my primary machine by following ht1923.
    However, now the problem I see is that even though the ipod connects successfully , to my primary machine , when I synch and add music, no music shows up on the ipod even though itunes says synch successful. The ipod says "no music".
    ipod serial number: C8NJRFX4F0GV
    my primary pc is an HP Elitebook, running windows 7 professional 64 bit version
    All itunes software completed removed and reinstalled clean.
    Thank you

    I would like to chime in that I've confirmed this as a reproducible bug on my iPod Nano 7th generation. I have an iTunes library with an offending compilation, and to avoid any possible tagging incompatability, I've converted the files to AAC with clean tags containing the album, artist, title, and track number. The album artist is "Various Artists" and I've checked off the "Part of a compilation" box for each track in my library.
    These tracks all show their correct artists when I sync this library to my iPhone. However, when I sync the exact same tracks to my iPod Nano 7th Gen, it choose a random artist from amongst all the artists within the compilation and shows that artist name on *every* track.
    iPod Nano 7th Gen has a bug in the firmware for displaying artists correctly when they are part of a compilation. The OP is likely doing nothing wrong. Apple needs to issue new firmware. Alternatively, I cannot think of any decent workaround short of splitting off each track of the compilation into a separate album, which, would be a huge pain and likely impractical for most people.

  • Using windows 8 - receive message "ipod detected but cannot be identified" when connecting ipod nano 7th gen. Have unisntalled and reinstalled itunes from apple site as advised with no luck. Has anyone else had this problem and resolved it please?

    Using windows 8 - receive message "ipod detected but cannot be identified properly" when connecting ipod nano 7th gen. Have unisntalled and reinstalled itunes from apple site as advised with no luck. Has anyone else had this problem and resolved it please?

    This is how it's displayed: http://i50.tinypic.com/nd7vk7.jpg
    And this is what happens when I click properties and 'search for solutions': http://i47.tinypic.com/2iu3vrc.jpg (the box disappears after that, apparently having done nothing, when I search online for software it informs me my computer already has the best/latest installed)
    I use a Toshiba Satelite L350-170, my Vista is a 32-bit Thankyou!
    Message was edited by: Martha11

  • IPod nano 7th gen (brand new) doesn't recognize Headphones

    I have a brand new iPod nano (7th gen), and it doesn't detect when headphones are plugged in. I have read that the problem can ocurr because the headphones are not correctly inserted or that the headphone jack has dust inside. As i always do on a regular basis with mp3 devices, i cleaned out the jack to be sure
    This is what happens:
    When music is not playing i hear a crackle pop sound every 2 seconds or so. My headphones are perfectly fine and work with my Samsung galaxy s4 and my old iPod touch, and my brothers iPhone. Just don't work with iPod nano. I have 3 pairs of headphones all which do not work but I do not have the original headphones. they are so uncomfortable and seems unfair to me that apple would have a one size fits al headphone that only works with the device. I do not intend on switching.
    When I play a song, and then press the sleep/wake button to turn off the display, the music stops. Or if I let the music play, it stops when the screen times out and turns off. These two things occur because the iPod "thinks" that there are no headphones inserted.
    When I try to activate the FM radio, the radio won't start because it says that there is no radio signal (which occurs when no headphones are connected).
    Needless to say, the microphone and volume controls of the iPhone headset, don´t work at all (they even work on the iPod shuffle!).. and because of this, no voice recording for me!
    I have also restored the device in iTunes, and updated with no luck.....
    Thanks in advance for any useful answer!
    iPod nano

    First, make sure the headphones plug is completely inserted into the nano's headphones jack.  It should "click" into place.  The fit may be tighter than expected, especially when new.  There is a sensor in there, and if the plug is not completely inserted, you may get some sound, but the nano will not "sense" the headphones.
    If that is not the problem, you should have the nano looked at under warranty.  It should work with any standard headphones. If there is an Apple Store nearby, you can make a reservation at the store's Genius Bar and take it there.

  • IPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync

    iPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync with official apple lightening cable.
    It worked for almost a year then suddenly began to say that. My computer [windows], lightening cable and my power brick [all apple official] are all the same as they were when it was working. The iPod is almost a year old now, and has worked perfectly up until about a week ago.
    I have tried resetting the iPod, plugging it into different charging sources but it keeps saying "Unsupported. Accessory is not supported"
    Does anyone have any ideas on how to fix it?
    Thanks.

    Your iPod Nano firmware and iTunes updated to the current versions? 
    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. 

  • How to stream movies from an ipod nano 7th gen

    I just bought an iPod nano 7th gen and I own an Apple TV and a lightning connector  to hdmi cable. Is there a way to put movies from my iPod on my tv

    The 6th gen nano could not play videos, so it certainly could not stream them to a TV.  It may have been able to show photo slideshows on a TV screen.
    The 5th gen nano (plus 3rd and 4th gen) may have had the ability, but I don't think its output was HDMI.  You could use this
    http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable
    to output a composite (non-digital) signal to a TV.  But the new nano has a Lightning connector, so I probably won't work (even if you use an adapter).

  • Ipod nano 7th GEN no audio out from head phones jack

    I am trying to use my Ipod nano 7th Gen with a monster wireless remote that connects to the charging and sync connection. The remote works fine and I can control the Ipod just fine with it, but when I connect the headphones to the headphone jack there is no audio. If I remove the wireless remote receiver from the charging sync connection the headphones jack works just fine. I am using a lighting speed to a 30 pin adaptor because the monster remote receiver is of the 30 pin format if that matters.
    Please let me know if this is normal or if there is a work around. My intention is to use the Ipod connected to a motorcycle sound system using the headphones connection to connect it to the motorcycle system amp and control the Ipod wirelessly.
    Thank you!

    Can you provide a link to the monster product, or the model name/number?  If it's a Bluetooth product, it seems superfluous to connect the receiver to the dock connector, because the 7th gen nano has built in Bluetooth.
    So, IF the remote control device is Bluetooth, you may be able to pair to it from the nano without connecting the receiver device to the dock connector.
    If it's not Bluetooth, you may be able to find an equivalent remote control device that IS Bluetooth, and not need to connect anything to the dock connector, which seems to be the source of the problem.

  • Ipod nano 7th gen stuck on apple logo screen

    New iPod nano 7th gen.  At first attempt to upload songs, was prompted to update software.  So, software was updated and as I was installing software update to the iPod, I got a message stating that the iPod was in the process of a restore (I think this is what it said.  I didn't pay a whole lot of attention as i was not expecting any problems).  I continued with the restore because nothing had been uploaded to the iPod yet so nothing would be lost.  At this point, the device has been stuck on the apple logo screen for a couple of hours now.  The only response I can get from it is when I do a reset.  The screen will black as it should and then go right back to the logo and stay.  Please help.....Son not happy as this was one of his Christmas presents this morning.  Really not looking forward to a trip to the apple store on the day after Christmas.

    I am afraid yo need to visit the store and possibly ask for a replacement. In some cases, doing the reset will correct any issues, but by the way you describe it, it freezes with apple logo. Better to get a replacement.

  • IPOD NANO 7TH GEN AUDIO ISSUE

    Hi ,
    I bought a Ipod Nano 7th Gen sep last year . For last few days audio quality has been reduced a bit i.e Clarity is missing , Bits are not so powerful .
    Kindly help what to do .
    I already reset the same twice but not getting any result .
    Thanks
    GS
    9051185601

    @ Watanabe Thanks boss , but I checked the same with out any result and pls note I use "ROCK" in the "EQ" setting .
    Hope there s not any issues with hardware .
    Could you please advice some better headphone for my Nano .
    Thanks for your support .
    GS

  • I LOST IPOD NANO 7th gen on US Air flight

    Has anyone found an IPOD NANO 7th gen on a US Air flight?   I was flying from Nassau to Syra on 2/16 and my IPOD fell out of my pocket on the plane.  I will offer a reward   Thanks! AD

    Ok.  That's too bad.  Do you have a question you would like to ask?

  • The date and time on my ipod nano 7th gen keeps on changing

    Hi,
    Since i bought my iPod Nano 7th gen, ive been having problems with the date and time. Every time i change it to the actual time and date, it changes after a while. Does this happen with anyone else? Would there be a problem with my iPod?

    Well after i change it it seems fine, but when i use it another time it has been changed.

Maybe you are looking for