My ipod nano 7th generation is connected and recognised by my new windows 8 laptop but not recognised as a device on itunes

Hi. Can anyone help please. I have downloaded all my music onto my windows 8 laptop. I have tried to sync my ipod nano but am unable to select 'sync' under 'devices' - doesn't allow me to do so. Ipod is connected and recognised by my laptop. Help!

ok so make sure itunes is up to date 11.1.3
try different usb port, cable, and dont use a splitter or hub
unplug all non essiential usb devices like printer ect..
drop all security software including the windows firewall.
this article may help
http://support.apple.com/kb/TS1538
Peace, Clyde

Similar Messages

My Ipod nano 7th generation turned off and won't turn back on. what should I do?

my Ipod nano 7th generation turned off and won't turn back on. what should I do?

If you have done the reset and nothing appears and you are sure it still has a charge and it doesn't turn on, you may request for a replacement if it still covered by the warranty. Cheers!

What adapter do I need for my ipod Nano 7th Generation to connect to a Sony home docking station (30 pin). I purchased the one recommended (Lightning to 30 pin adapter), but it says 'this accessory is not supported by this device)?

Could someone please tell me the correct lead I need for an Applie Ipod 7th Generation 16GB for a Sony docking station. I bought a Lightning to 30 pin adaptor that fits the dock but not the ipod (this was recommended to me by someone from the Apple shop believe it or not). I need one that will fit the ipod and then slot into the 30 pin dock. The dock pulls out and my old ipod (5th Generation) just slotted straight in, but this slot obviously doesn't fit. It would really help if someone can recommend what I need to use or even if there is one that just slots in or whether I need some sort of cable and can't use the docking station. I've had a lock at the Apple store but just keep getting confused about what does what and can't seem to see anything unless I need an additional cable to slot into the 30 pin adapter I already have?
HELP - CONFUSED.COM!

If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

Why won't my BRAND NEW iPod Nano 7th Generation recognize headphones?

My BRAND NEW iPod Nano 7th Generation (purchased from and Apple Store less than a week ago) will not recognize any headphones. Consequently, I can hear NO sounds. It worked just fine right after I set it up. I turned it off, disconnected headphones that came with the Nano. Several hours later I turned it on again, plugged in the headphones, and then I could hear NOTHING. When I tried the radio, I got the message there was no signal because it said the headphones were not plugged in, which they were. I have tried two other sets of headphones. None work, but they all work in another iPod, so I know it is not the headphones. I restored the software and started over, but this didn't help either. I have pushed the headphone jack in as far as possible. This is very frustating because this Nano was a birthday gift for my husband. I will be grateful for any help. Thanks a lot.

Thanks SO much for the GREAT advice! I did just what you said, and I am back in business. The sound is fine, and the radio works. I cleaned out the jack with a tooth pick, blew some air in, and pushed the jack in a bit harder.I guess I was too tentative about pushing the jack all the way in. You were right that it is a tight fit. Thanks again, deggie. My husband thanks you also! His birthday gift now works! Yay!

Ipod Nano 7th generation touch interface is now screwed with due to apple update.

Hi, I recently purchased a new laptop switching over from a macbook pro 2010 of which the logicboard died. In this newly configured windows 7 64 bit laptop I downloaded the latest itunes. I then connected my ipod nano 7th generation to it and it requested to format it since it was formatted for a mac. I did so and restored my ipod nano 7th generation. After this however my previously perfectly working nano touch interface (swiping, touch to select) is now completely messed up. This has to be due to the formatting and/or the new nano update or itunes update from apple. I can't even swipe to the right or left to move between screen interfaces on my nano anymore. As well the touch icons require double taps and have rectangular white selection boxes over each icon (NOT NORMAL)
Overall I am very displeased and want apple to fix this with either a new firmware nano 7th generation update or apple itunes update for windows 7 64bit. I'm thinking of buying a replacement iphone 4 but now that this issue is prevalent how can I TRUST Apple that nothing wrong will occur with connecting a new iphone 4 to my itunes on a windows 7 64 bit PC.
I am NOT the only one with this issue as you can check out for yourself: http://answers.yahoo.com/question/index?qid=20130727205241AAOmiuC
REASON FOR POSTING THIS HERE: I want more exposure to this issue. I couldn't get access to customer support since my ipod nano 7th generation is over a year old. This is cruel but whatever, Apple does what it wants and I will post this here to do what I want. Gain exposure to this defect that clearly Apple is not addressing since the above link displays a user with the same issue and posted the problem 3 months ago.
DO SOMETHING ABOUT THIS APPLE

Hi ImAMinion.
Very good question. I should have explained that part. VoiceOver changes how the navigation functions so it's a little tricky.
From the home screen I got to settings by swiping up and down instead of the normal left and right.
To open settings I first tapped once on the settings icon so that the box appeared around the icon. Then I double tapped the icon to open it.
I repeated the "tap once to get the box then double tap to open" process to navigate through the settings menu. Navigate to: Settings -> General -> Accessibility -> VoiceOver -> set to off. Once it's off the navigation will return to normal.
Hope that helps.

Windows can't find driver for ipod nano 7th generation

I just got the IPod Nano 7th generation. When I plugged I in the computer will pick up the apple mobile storage device usb driver, but I get an error for the iPod saying that no driver was found. I have tried connecting to different usb ports and also tried uninstalling anything related to the iPod or iTunes. So, any help would be appreciated.

Ok I fixed the problem I had. I went under device manager and right-clicked the ipod icon, and told it to update the driver. For the update though I didn't use the automatic search. I told it to search in the location (windows/winsxs) and it found the driver. I hope this helps somebody else.
Since I didn't mention it earlier I have Windows 7 64-bit.

Ipod nano 7th generation not showing up on itunes.

I just got my Ipod Nano 7th Generation for christmas, and it has worked great till recently on the itunes program, it began showing this message:
"The software required for this ipod is not installed correctly. Please reinstall Itunes to install the required software."
I HAVE REINSTALLED ITUNES 5 TIMES ALREADY!!! And nothing! and i do mean NOTHING. IS. WORKING. Its giving me a very big headache. Please. Someone. Help. Me

HI alivia-rose!
Here is an article that will help you troubleshoot this issue:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

HT1320 Ipod nano 7th generation freeze

my ipod nano 7th generation just froze and is not responding to sleep /wake button or home button. Tried plugging into power as well but the screen remains dark. pl help

Hi Skaroa1!
I have a website here that can walk you through some troubleshooting steps for the issues you are seeing with your iPod nano. You will just need to pick the iPod that matches yours and follow the steps that the website suggests here:
Apple - Support - iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Thanks for using the Apple Support Communities. Have a good one!
-Braden

How do I shuffle a playlist during a workout on an ipod nano 7th generation?

How do I shuffle a playlist during a workout on an ipod nano 7th generation? The only shuffle option I see is for all songs, not a specific playlist. I know that I can begin a workout using the now playing option. This will allow me to shuffle a playlist in the begining of my workout, but if I want to change music I cannot get back into shuffle mode unless I select the shuffle all songs option.

This is from the Nike support page:
<http://support-en-us.nikeplus.com/app/answers/detail/a_id/20976/p/3169,3171
Shuffle Songs: Plays songs shuffled randomly from your music library. To shuffle a playlist rather than your entire music library, start the playlist in shuffle mode before setting up your Nike+ workout. Then, when setting up your workout preferences, select "now playing" in the Music menu.

Can 2 people listen with bluetooth earphones to ipod nano 7th generation?

Can 2 people listen with bluetooth earphones to ipod nano 7th generation at the same time? How?

No. Sorry. It can pair to other devices but there will be only one audio output.

Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

Lightning to 30-pin adapter and Lightning to 30-pin adapter (0.2m) do not work if connected together by other third-party accessories.

Hi everyone, I was wondering if someone can help me. I recently got my first ever Ipod. It's the new Ipod Nano 7th Generation. I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.

Hi everyone, I was wondering if someone can help me. I recently got my first ever Ipod. It's the new Ipod Nano 7th Generation. I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens. I have tried uninstalling & re-installing Itunes but this didnt help.
Does anyone have any ideas?
Thanks for your help.

I think the problem is that the iPod got set to Manually manage music and videos. It needs to be set up for automatic syncing again. Just unchecking that Manually manage music and videos setting does not do it.
In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen. In the sidebar (along left side of screen), there are two headings (Settings and On My Device). Under Settings, click on Music. To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
Check the box at the top for Sync Music. That turns ON automatic syncing for music. Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod). Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below. Then click Apply.

I just recently updated my iPod Nano 7th Generation, and, after the upgrade finished, my iTunes library, playlists and all, vanished. How can I restore the playlists and songs to iTunes?

I updated my iPod Nano 7th Generation, and it wiped my iTunes library. I no longer have my playlists or movies. I was able to recover my music, but the many, many playlists I had, I could not recover. Is there any way I could recover them?

Hello apbvieira,
It sounds like your iPod Nano is not recognized in iTunes anymore after a recent update. I recommend the following article to help you get that in order named:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
1. Start with the iPod Troubleshooting Assistant
If you haven't already done so, use the iPod Troubleshooting Assistant that applies to your iPod. This will often solve your issue.
If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
Note: To determine if your iPod syncs via USB or FireWire, check the table in the Additional Information section below.
This step will get you started, but there are additional steps in the article if you need them.
Thank you for using Apple Support Communities.
Regards,
Sterling

Connecting ipod nano 7th generation through car stereo usb cord.

When I connect my ipod nano 7th generation to my car stereo through a usb cable, (using a lightning adapter), I am not able to control my music through the ipod, but only through the car stereo system. The car stereo system won't allow me to play my playlist on shuffle mode nor can I control the ipod itself through the device when it's plugged in. I have to unplug it and make new playlist selections. Any solutions?

I am having the same problem with mine. I have a Hyundai Sonota and can pair with my Ipod Nano but cannot connect. I also would appreciate any help. Thanks!!

Car Bluetooth Stereo and iPod Nano 7th Generation

Hi,
I have a Renault Clio (2000) with factory fitted stereo which has just decided to break. I would like a new stereo to replace the old one but want to be able to wirelessly connect my iPod Nano 7th Generation (i.e. Bluetooth) as I hate using an AUX cable in my car. Which stereo would be suitable for my iPod. I have a budget of around £100 and looked on Halfords but no of the stereo's stated they would play over Bluetooth.
Any Help would be greatly appreciated.
Thanks,
Nathan

You are looking for one that supports Bluetooth profile A2DP.

My ipod nano 7th generation is connected and recognised by my new windows 8 laptop but not recognised as a device on itunes

Similar Messages

Maybe you are looking for