My ipod nano 7th generation is stuck in a restore loop with a white screen. Now it won't turn on anymore. What to do?

My new Ipod Nano 7th generation is stuck in a restore loop. Here is what happened: I added music to it using the latest version of iTunes, the colored bar at the bottom of the summary tab in iTunes showed my that I added it and I disconnected it to listen to the music. As I turned it on, it told me that there is neither music nor pictures on it. So I connected it again to my computer and iTunes told me that I had to restore. Which I did following all the steps but it keep telling me that I need to restore it. After three times of restore it, I disconnected it from my PC and turned it off. Now it won't turn on anymore - even though the battery is fully charged - and when I connect it to iTunes, iTunes tell me "The iPod software updater could not be contacted. The server does not support this version of iTunes." Well, I just downloaded the newest version a couple of minutes ago from the apple website. My iPod stays black. What shall I do?

Hi clarity,
Welcome to Apple Support Communities.
You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
Best,
Jeremy

Similar Messages

  • My iPod nano 3rd gen is stuck in a restore loop.

    My iPod nano 3rd gen is stuck in a restore loop.  I have wiped it with Disc Utility and attempted to restore with iTunes, but there was no effect. I checked it in diagnostic mode against an identical pod and found no significant differences in the results, both checked out fine.  I know that this is not a windows driver issue since I use a mac.  In any case such an issue should have been resolved when I wiped the pod.  I have not attempted to load any music on it or sync my library, so a corrupted file seems unlikely as well. there is no water damage and the case is in excellent condition.  I have no idea whats wrong with it so any help or suggestions would be appreciated.

    Hi clarity,
    Welcome to Apple Support Communities.
    You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    Best,
    Jeremy

  • Ipod nano 7th generation: is the cable included to sync with iTunes, or just the charger?

    With info about what can be purchased separately, i just want to know what is included in the purchase of the iPod Nano 7th g.
    Is it just the charger, or also a cable that will allow me to sync it to iTunes (USB and Lightning ends)?

    iPod nano
    Apple EarPods
    Lightning to USB Cable
    Quick Start guide

  • Ipod Nano 8GB 4th Gen stuck in a restore loop

    Screen is black - reset sequence has no effect. Itunes initiates a restore sequence, The nano Beeps 4 time , and loops in restore sequence.
    No network drives on the PC ( windows vista 64Bits). Itunes got updated 2 days before this happened.
    I have A Shuffle that work fine using same computer and usb ports.
    Daugther says nano it was dropped on the floor. Worked a month.... I`m out of ideas- anyone has a suggestion ? Thanks

    Brought the brick to the Genius bar to be told I had 2 options:
    1) - Get it evaluated by one of the tech. They will tell me how much it will cost to get it 'fixed' I.E. the will replace it by a factory refurbished one.
    2) by a new one with a 10% discount if I bring back the broken one.
    Will get it evaluated and will post the cost estimate...

  • Ipod nano 7th generation stuck in recovery mode

    My iPod nano 7th generation is stuck in the recovery mode. It's a perpetual loop. How do I restore my device to normal so that I can sync my music?

    Hi akki2094, 
    Thanks for contributing to the Apple Support Communities. 
    It sounds like you have an iPod nano that is stuck in recovery mode. 
    If you haven't already, use the steps in this article to restore the iPod to factory settings:
    Restoring iPod to factory settings - Apple Support
    If your iPod can't be restored, it may require service as mentioned in iPod nano (7th generation): Hardware troubleshooting:
    If the issue is still not resolved, please read this information on servicing your iPod.
    Best Regards,
    Jeremy 

  • My ipod nano 7th gen is stuck on a loop of turning on and off.

    My ipod nano 7th gen is stuck on a loop of turning on and off, I've already done the reset, and everything that was recommended on other similar questions.  it isn't recognized by iTunes except in recovery mode where it allows me to restore but then goes right back to turning on and off once i'm back to normal play mode.  Once on recovery mode it works fine and doesn't turn on and off.  I've also uninstalled and reinstalled itunes to avail.  I'm super frustrated and am hoping that I won't need to buy a new one.  Is there anything else I can do before i just toss it out?  i'm getting a bit frustrated just watching my ipod turn on to the apple and then turn right back off.

    Hi there tksunrise,
    You may find the troubleshooting steps in the article below helpful.
    iPod nano (7th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS4433
    Will not turn on or screen remains dark
    Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    If iPod does not turn on after ten minutes, try resetting it while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Home button for at least six seconds or until you see the Apple logo appear.
    If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    If the screen remains dark and will not turn on, then your iPod may need service.
    Issue not resolved
    If the issue is still not resolved, please read this information on servicing your iPod.
    -Griff W. 

  • Can i use my new ipod nano 7th generation on my macbook pro

    I registered my new ipod nano 7th generation on my macbook pro.  While on my macbook, I tried to download wma audiobooks from the library using overdrive media console & its not working.....so, I decided to use my windows laptop.  I have the latest version of itunes on both laptops.  (I know I can download & transfer wma audiobooks to my shuffle using overdrive media console & windows laptop.)  I'm getting an error message that says I have to reformat my nano if I want to download wma audiobooks.  Can I use my nano on macbook pro & windows laptop?  will I ever be able to download wma audiobooks to my nano using macbook? 

    Your iPod Nano will need to be restored in iTunes on the Windows laptop before you can start adding/syncing content over to it.
    Or if you want to use it with OverDrive on the Mac, you'll need to download the books as MP3s as WMA is not supported.
    B-rock

  • How do you dowload songs from iPod nano 7th generation to iTunes on another computer?

    I have iTunes on two computers. I bought a movie on one computer, but through a series of events had to erase my iPod on that computer and sync it to a different computer. Now, it will not sync the movie unless it is on the computer I bought the movie from. Because I erased my iPod on the computer I bought the movie, I have to download my iPod to the computer I bought the movie on in order to sync the movie to my iPod. How do you download everything on the Ipod nano 7th generation to iTunes on another computer?

    Hello I.lmoss,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/ht1848
    Have a nice day,
    Mario

  • How do i add videos to my ipod nano (7th generation) ?

    How do i add videos to my ipod nano (7th generation) ? I uploaded the videos on my itunes but whenever i select "add to my ipod" a message comes out saying: "This video was not copied to the ipod because it cannot be played on this ipod." So what shall I do? And in what form should the video be to be played on the ipod?

    Hi there Engy Hossam,
    You may find the information in the article below helpful.
    iTunes: Videos may be unable to sync to iPhone, iPad, or iPod
    http://support.apple.com/kb/ts1497
    -Griff W. 

  • How do I shuffle a playlist during a workout on an ipod nano 7th generation?

    How do I shuffle a playlist during a workout on an ipod nano 7th generation?  The only shuffle option I see is for all songs, not a specific playlist.  I know that I can begin a workout using the now playing option.  This will allow me to shuffle a playlist in the begining of my workout, but if I want to change music I cannot get back into shuffle mode unless I select the shuffle all songs option. 

    This is from the Nike support page:
    <http://support-en-us.nikeplus.com/app/answers/detail/a_id/20976/p/3169,3171
    Shuffle Songs: Plays songs shuffled randomly from your music library. To shuffle a playlist rather than your entire music library, start the playlist in shuffle mode before setting up your Nike+ workout. Then, when setting up your workout preferences, select "now playing" in the Music menu.

  • How do i share music between 2 users on one computer with ipod nano 7th generation

    How do I share music on itunes between 2 users on 1 computer and get the music from the computer onto my ipod nano 7th generation?

    Hi kstrenge,
    Welcome to the Apple Support Communities!
    I understand you want to share iTunes music on the same Windows XP computer between two different user accounts. To accomplish this please read over and follow the steps in the attached article.
    iTunes: How to share music between different user accounts on a single computer
    http://support.apple.com/kb/HT1203
    Once the music is shared and you are ready to sync your music from the computer to your iPod nano, please follow the steps in this article.
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/HT1351
    Have a great day,
    Joe

  • How do I transfer iTunes playlists to my iPod nano 7th generation

    I just received a new iPod nano 7th generation and want to transfer my playlists in iTunes to the nano.  I have been unable to find instructions for this in the manual or online.  Can you help???

    Select it in the iTunes sidebar, click on its name, and type a new name. If you're using iTunes 11, choose to show the sidebar from the View menu.
    (73513)

  • TS1363 My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue?

    My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.

    uninstall all iTunes,5 programes,this worked for me after reinstall them

  • Ipod Nano 7th generation not recognized by computer or iTunes

    Neither my computer nor ITunes recognizes my Ipod nano 7th generation. It was working fine until I ran an intensive AVG PC tuneup on the laptop. Device manager recognizes the Ipod and says it is working correctly. I have done all suggested troubleshooting and nothing has yet worked. Additional suggestions or info I should provide?

    diagnostic shows....
    **** Device Connectivity Tests ****
    iPodService 11.3.1.2 (x64) is currently running.
    iTunesHelper 11.3.1.2 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod nano (4th Generation) running firmware version 1.0.4
    Serial Number:       Y(I removed info)
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.
    it looks like everything is fine, except it can't find the ipod... why?
    when I plug in a thumb drive, it recognizes that, why not the ipod?

  • I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?

    I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?

    Hello there, kiwilucea.
    The following Knowledge Base article offers up some in-depth steps for troubleshooting your issue:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Keep in mind if you get to Step 12 Reinstall iTunes, those steps need to be followed exactly as outlined for the reinstall to be effective.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for

  • Adobe Acrobat 9 Standard License Issue

    Adobe 9 Standard software was bought pre-installed on my Dell workstation (Windows XP).  Now when trying to open the program fresh from the start bar, it tries to install the program.  Yet if I open a saved PDF, the program opens fine but displays an

  • Arrows in pages

    I am a chemistry teacher, and I am typing chemical equations H2+O2=H20 The equals sign to be an arrow. In office you can "insert>symbol" and their is an arrow (different than the object arrow) Where can I find this THANK YOU!

  • Need input: do process chain/InfoPackages changeable on PROD in your compa?

    We have to make our big process chains/InfoPackages changeable on our production system.  But you know whenever we modify a process chain and activate it or save a changed InfoPackage, the annoying Change Request window pops up to force you to create

  • Photoshop not found

    I've just installed LR, and am doing basic setup. In Preferences/External Editor, it says "Edit in Adobe Photoshop(not found)". We have a registered version of CS2 installed in the default location. We're running XP with fast user switching - could t

  • Drill down charts

    hi all. i m creating a pie chart to show population of all provinces/states with an intention that clicking a particular province to generate population chart for all its cities. i m using following syntax for province population code start { SELECT