My iPod Nano 7th generation will not make any sound.

The sound is all the way up, the ear pods are plugged in completely, and I have the song playing. I have tried turning it on and off, going to settings. What's wrong? Please don't tell me to get another one...I can't afford it...

It is under warranty, you won't have to pay for another one.
The headphone jack is very tight on a new Nano, be sure the headphones are plugged all the way in.

Similar Messages

  • My Ipod nano 7th generation will not sync.

    My Ipod nano 7th generation will not sync, I have updated itunes very recently. Everytime I try to sync anything, playlists, music, podcasts, or even photos from my computer, It does not sync. However before It syncs it tells me that I need to authorize my computer so that I can play purchased songs, so I log in with my apple ID and it says that the computer is now authorized but then when I press the sync button again the same message pops up over and over. Can anybody fix this?

    Hello stowie10,
    I would make sure that music is checked to sync, or any other data at that. Check out the following article to get the squared way with this setup.
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.  

  • IPod Nano 7th Generation will not turn on

    My 10 month old iPod Nano 7th Generation will not turn on - all of a sudden.
    All songs on the device have disappeared.
    Shows in iTunes - even shows as having a fully charged battery.
    Holding Home Button and Sleep/Wake button down, even for a long time, doesn't help.
    Have changed USB ports, from computer to AC powered USB charging station.
    Help?

    Just saw elsewhere on the forum to press and hold the power and home buttons and it fixxed it for me

  • My new ipod nano 7th generation will not sync with i tunes, followed all the apple on line trouble shooting ideas, this device will not show up in itunes but i can see it from explorer, windows 7 user.

    ipod nano 7th generation will not sysc with i tunes is updated , device does not show up in itunes under devices but shows itself in explorer.ran diagnostics failed sync. about ready to take this back to best buy.

    yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed.  click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
    click on music check mark music done and sync
    problem solved
    thanks apple

  • New ipod nano 7th generation will not turn on. Any suggestions?

    Just bought a new ipod nano 7th generation & the device will not turn on. Any suggestions?

    Have you charged it?

  • My iPod nano 7th generation will not turn on or charge.

    Can someone please help me. My ipod has shutoff. It will not turn on what so ever. I have tried methods from other posts such as resetting it but still nothing. Is this a sign of a dead battery?

    Hi dude971503,
    If your iPod nano isn't responding or won't turn on, you may find the troubleshooting steps outlined in the following article helpful:
    iPod nano (7th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS4433
    Regards,
    - Brenden

  • IPod nano (7th generation) will not restore in iTunes

    Recently, I've been havng issues syncing my iPod nano (7th generation). I thought the most logical way to fix this is to restore it. When I click "Restore" everything is fine till it gets to "Extracting Software" then it says "The iPod "Alex's iPod nano" can not be restored because it is in use with another application." I do have warranty. Should I take it to the Apple Store?

    Is the Enable Disk Use option enabled from under the iPod's Summary tab in iTunes? If so, disable it and then try restoring again.
    Sometimes simply rebooting the iPod and Mac can resolve the issue. To reset the Nano, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    B-rock

  • My ipod nano 7th generation will not hold a charge

    i plug in my ipod to the computer. it syncs just fine and looks like it is charging. However, as soon as i unplug it it dies. it seems to not be able to hold a charge.

    Hi raf996,
    If you are having power related issues with your iPod nano 7th Gen, you may find the troubleshooting steps outlined in the following article helpful, including service if necessary:
    iPod nano (7th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS4433
    Regards,
    - Brenden

  • HT201413 apple ipod nano 7th generation will not sync with itunes

    My new apple nano 7th generation ipod does not sync with itunes. can you suggest something other than reinstalling itune?

    yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed.  click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
    click on music check mark music done and sync
    problem solved
    thanks apple

  • IPod nano 7th Generation will not register in computer

    My iPod 7G has suddenly ceased recognizing any power source. The battery died I went to plug it in and neither the computer or iTunes would not even register that there was anything attached. When I tried to restart and do a hard restore, it would glitch and just continuously restart unless unplugged from power. I have not added any new files that could have altered it.

    Is the Enable Disk Use option enabled from under the iPod's Summary tab in iTunes? If so, disable it and then try restoring again.
    Sometimes simply rebooting the iPod and Mac can resolve the issue. To reset the Nano, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    B-rock

  • HT1365 my ipod nano 7th generation will not connect with my MacBookAir 2012 11 inch. It will pair but the message on my ipod says that it can't and make sure it is in range and on but it is.

    it is and all ready mut wont work tried moving but still dosn't work

    Well, shut my mouth!  There was a similar question over to the right about a 6th generation nano repeating over and over again -- I read the answer to that one, followed the instructions, and holy crap, it's back to normal.
    Is there a name for this when you end up replying to your own aggravating question?  That's what I did.  Now I can go out and listen.  It's only 91 degrees.  Heaven. Thanks, Apple. 

  • HT1459 MY IPOD NANO 6TH GENERATION WILL NOT TURN ON I GOT IT FOR CHRISTMAS AND PLAYED THE RADIO ON IT WITH OUT PLUGING IT INOT ITUNES AND I WAS WONERING HOW TO FIX IT ?

    hi my ipod nano 6th generation will not turn on what should i do ...no batery left and never pluged it into itunes

    Hi meganisawsome,
    If your iPod will not turn on and you are getting indicators that there is no battery left, the first step would be to make sure that the iPod has been charged correctly. You may find the following article useful:
    Apple Support: Charging your iPod battery
    http://support.apple.com/kb/HT1384
    If you are still having issues after charging, you may want to look at this article:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Regards,
    - Brenden

  • My ipod nano 6th generation will not turn on.

    My iPod nano (6th generation) will not turn on. I have charged it (attached to my computer) for 30 minutes. I have tried to reset it (held down Wake and Volume Down for 8 seconds)- no response. I have factory restored it (through iTunes)- no response. It shows up as connected to my computer and will sync in iTunes, but the display on the iPod will not turn on. Any ideas?

    Hey s.mccarter2010,
    Thanks for the question. After reviewing your post, it sounds like you have tried a lot of things and the iPod still will not turn on. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iPod won't turn on
    If you have tried the solutions above and iPod still won't turn on, check the following:
    Make sure iPod is the only device in your FireWire or USB chain. Disconnect everything but the mouse, keyboard, and your iPod, then see if it will turn on.
    Make sure you are using the FireWire or USB cable that came with your iPod, and that the cable is in good condition.
    Try connecting iPod to the built-in port of a different computer to see if that works. Note: If using a portable computer, make sure it is plugged in to a power source and that the lid or display is open. If the lid is closed the computer may go into either standby, sleep, or hibernation mode and iPod will not charge properly.
    If you still can't turn iPod on after performing these steps, it may need to be repaired. You can arrange for repair at the iPod Service Website.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • My iPod radio  7th generation will not connect

    my iPod radio  7th generation will not connect, I have tried changing ear phones and still nothing.

    Does it show the radio to be available on your Nano?

  • My ipod nano 7th generation is not identify to itunes. What can I do?

    My ipod nano 7th generation is not identify to itunes. What can I do?

    See BOLD
    lost/stolen                                     
    No app on the iOS device is required.                           
    - If you previously turned on FIndMyiPod/iPhone/iPad on the iOS device in Settings>iCloud and wifi is on and connected or cellular data is on and connected for, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
    - You can also wipe/erase the iOS device and have the device play a sound via iCloud.
    iCloud: Erase your device
    iCloud: Use Lost Mode
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the device and report to police and carrier if iPhone or cellular iPad
    - There is no way to prevent someone from restoring the erase (it erases it) using it unless you had iOS 7 or later on the device. With iOS 7 or later, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                               
    Reporting a lost or stolen Apple product                                              
      - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Maybe you are looking for

  • Is iSync compatible with the new Motorola Razor v3xx Gold mobile phone?

    Today I bought a new phone (Gold Razor v3xx) because I lost my 5-month old Motorola Razor v3. I had used iSync to share my contacts in my Address Book using Bluetooth. Now I am stuck because iSync's error message said it can not accept this new devic

  • How do I stop and delete a free download from Itunes?

    I have a free download that was purchased from Itunes, but we have dial-up and don't want to wait for the download. We just want to delete it, but whenever we highlight it, right click, and hit delete, it still remains. Any suggestions? We're new to

  • Send inbound IDOC as outbound(copy)

    Hi, We need to send the same inbound IDOC as outbound IDOC to the customer(they want to get a copy of it) How can we do this? We are getting inbound sales order IDOC's and the customer wants the copy of the same IDOC, not order acknowledgement. Is it

  • Dead pixel mac book pro retina !!! Im very frustrated

    I'm from Brazil and I bought a mbp retina 13 2 month ago. I have now 2 dead pixels in my screen, and when I called to the apple assistance here in Brazil they told me that they can not fix the problem because I just have 2 dead pixel !!! I can not be

  • CL_SALV_COLUMN   F4 help

    Hi everyone, im using CL_SALV_COLUMN method SET_DDIC_REFERENCE to set a Search Help for my ALV field. The reference Z table field has search help assigned. SET_DDIC_REFERENCE gives me: DDIC_F4_AVAILABLE = space DDIC_F4_SEARCH_HELP = space DDIC_F4_VAL