My Ipod nano 7th generation will not sync.
My Ipod nano 7th generation will not sync, I have updated itunes very recently. Everytime I try to sync anything, playlists, music, podcasts, or even photos from my computer, It does not sync. However before It syncs it tells me that I need to authorize my computer so that I can play purchased songs, so I log in with my apple ID and it says that the computer is now authorized but then when I press the sync button again the same message pops up over and over. Can anybody fix this?
Hello stowie10,
I would make sure that music is checked to sync, or any other data at that. Check out the following article to get the squared way with this setup.
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
Thanks for using Apple Support Communities.
Regards,
-Norm G.
Similar Messages
-
ipod nano 7th generation will not sysc with i tunes is updated , device does not show up in itunes under devices but shows itself in explorer.ran diagnostics failed sync. about ready to take this back to best buy.
yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed. click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
click on music check mark music done and sync
problem solved
thanks apple -
HT201413 apple ipod nano 7th generation will not sync with itunes
My new apple nano 7th generation ipod does not sync with itunes. can you suggest something other than reinstalling itune?
yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed. click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
click on music check mark music done and sync
problem solved
thanks apple -
IPod Nano 7th Generation will not turn on
My 10 month old iPod Nano 7th Generation will not turn on - all of a sudden.
All songs on the device have disappeared.
Shows in iTunes - even shows as having a fully charged battery.
Holding Home Button and Sleep/Wake button down, even for a long time, doesn't help.
Have changed USB ports, from computer to AC powered USB charging station.
Help?Just saw elsewhere on the forum to press and hold the power and home buttons and it fixxed it for me
-
My Ipod nano 3rd generation will not sync with itunes or show up on windows, but other ipods do when I connect them using the same setup.
Hey Biglou1,
Thanks for the question, and welcome to Apple Support Communities.
I understand that your iPod nano(3rd generation) is not recognized in iTunes. The following troubleshooting assistant may provide a resolution:
Apple - Support - iPod - iPod nano (3rd generation) Troubleshooting
http://www.apple.com/support/ipod/five_rs/nano3gen/
If the above did not resolve your issue, choose an applicable article below that best describes your issue.
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M. -
IPod nano (7th generation) will not restore in iTunes
Recently, I've been havng issues syncing my iPod nano (7th generation). I thought the most logical way to fix this is to restore it. When I click "Restore" everything is fine till it gets to "Extracting Software" then it says "The iPod "Alex's iPod nano" can not be restored because it is in use with another application." I do have warranty. Should I take it to the Apple Store?
Is the Enable Disk Use option enabled from under the iPod's Summary tab in iTunes? If so, disable it and then try restoring again.
Sometimes simply rebooting the iPod and Mac can resolve the issue. To reset the Nano, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
B-rock -
New ipod nano 7th generation will not turn on. Any suggestions?
Just bought a new ipod nano 7th generation & the device will not turn on. Any suggestions?
Have you charged it?
-
My ipod nano 7th generation will not hold a charge
i plug in my ipod to the computer. it syncs just fine and looks like it is charging. However, as soon as i unplug it it dies. it seems to not be able to hold a charge.
Hi raf996,
If you are having power related issues with your iPod nano 7th Gen, you may find the troubleshooting steps outlined in the following article helpful, including service if necessary:
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Regards,
- Brenden -
My iPod nano 7th generation will not turn on or charge.
Can someone please help me. My ipod has shutoff. It will not turn on what so ever. I have tried methods from other posts such as resetting it but still nothing. Is this a sign of a dead battery?
Hi dude971503,
If your iPod nano isn't responding or won't turn on, you may find the troubleshooting steps outlined in the following article helpful:
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Regards,
- Brenden -
Ipod Classic 7th generation will not sync with all movies in Itunes
I just bought an Ipod classic today, due to my iphone 5 not able to connect to my car entertainment system and car stereo. Needing a 30 pin to connect to it. So I bought it, connected it to my mac computer, and not all the movie files will sync to it. I get this message:
For some reason, some of my movies will transfer to the ipod classic, and some will not. They are all m4v files. Does anyone have a suggestion?The files that won't copy probably have too high a data rate. From http://www.apple.com/ipodclassic/specs.html
Video
H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
tt2 -
My ipod nano 4th generation will not sync
I am trying to sync the photos onto a new computer but it does nothing
it is usually one way from pc to ipod nano, not the other way around
-
My iPod nano(7th Generation) is not syncing to my iTunes, what's going on?
I try to connect my iPod to my laptop but all it does is charges the iPod. It's not syncing to iTunes so I'm not able to add any music onto my iPod.
You may refer to this tutorial, it's about how to fix iTunes sync problem with iPod. Hope it helps. Feel free to email me if you need further help.
-
My iPod nano (6th generation) will not sync because of Error 13019.
Why won't my iPod nano sync? Error 13019 keeps showing up. I've tried to sync over and over. Help me!!
See here: iTunes: Error 13019 during sync
Some users have had luck by rebuilding their iTunes library.
iTunes: How to re-create your iTunes library and playlists
B-rock -
IPod nano 7th Generation will not register in computer
My iPod 7G has suddenly ceased recognizing any power source. The battery died I went to plug it in and neither the computer or iTunes would not even register that there was anything attached. When I tried to restart and do a hard restore, it would glitch and just continuously restart unless unplugged from power. I have not added any new files that could have altered it.
Is the Enable Disk Use option enabled from under the iPod's Summary tab in iTunes? If so, disable it and then try restoring again.
Sometimes simply rebooting the iPod and Mac can resolve the issue. To reset the Nano, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
B-rock -
it is and all ready mut wont work tried moving but still dosn't work
Well, shut my mouth! There was a similar question over to the right about a 6th generation nano repeating over and over again -- I read the answer to that one, followed the instructions, and holy crap, it's back to normal.
Is there a name for this when you end up replying to your own aggravating question? That's what I did. Now I can go out and listen. It's only 91 degrees. Heaven. Thanks, Apple.
Maybe you are looking for
-
I've had my ipod shuffle (2nd generation) for a long time now and after a year and a bit of not being in use it doesn't work. When I connect it to the computer it doesn't come up. Can my ipod be charged or fixed? Please help!
-
USD to Document currency conversion
I have a report that fetches all line item imbalances between a company and its trading partner in USD. I need to sum all imbalances and depending upon the selection criteria like imbalances over 10k/20k/30k, the respective line items need to be disp
-
How to insert a gif file into a table?
Hi, I need to insert a gif file into a table. Can anyone tell me where I can find the information on how to create this kind of table, how to insert a gif file into a table and how to select? Thanks, Helen
-
Help me diagnose my connection
Hi guys, I've noticed a 20Mbps drop in my downstream sync and I was wondering what might be causing it, I know most people will say that 60Mbps is enough but I just would like some thoughts as to why I'm experiencing the drop, ps my connection was so
-
Hi, Can some one help. I am getting string more than 32767 char so I want to use CLOB but I am unable to use in ref Cursor. CREATE OR REPLACE PROCEDURE PM.PROC_CURSOR_BTDCS (P_QUERY IN varchar2, P_batchid out Number) AS P VARCHAR2(32767); P_CURSOR_QU