My ipod nano FM radio does not work it only has European band and japan band and when you search to find a radio station I cant hear anything. Help please!!

my ipod nano FM radio does not work it only has European band and japan band and when you search to find a radio station I cant hear anything. Help please!!

Hi kahli:
Have a look at  http://manuals.info.apple.com/en_US/iPod_nano_5th_gen_UserGuide.pdf
AND
http://manuals.info.apple.com/en_US/iPod_nano_5th_gen_UserGuide.pdf

Similar Messages

  • Display of iPod Nano 2nd Generation does not work. Only backlight - nothing else. Experiences?

    The iPod still start and also plays music, but I can't see anything on the display.
    I can see the backlight, but not more...
    I have reinstalled, recovered and restarted the iPod.
    The firmware and iTunes is at the newest version.
    Anyone got experience with this? Is there a way to fix it?
    Thanks for your help

    Sounds like you have tried all of the regular troubleshooting.  So it points to an issue with your nano's LCD display.  You'll have want to have it repaired/replaced either by Apple or a third party repair company.
    B-rock

  • My ipod nano 6th generation will not work connected to my car radio?

    my ipod nano 6th generation will not work connected to my car radio? My wife's ipod nano 4th generation works perfectly.

    Hey CorineNL,
    If your iPod not recognized by iTunes or computer, I would follow the directions here:
    Follow this troubleshooting assistant.
    Also see these articles for further assistance:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iPod not recognized in iTunes and Mac desktop
    from: iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • My Ipod nano 4th gen DOES NOT sound good.... why? HELP

    My new iPod nano 4 GB does not sound good. I have tried everything: reset it, record new differentd CD's, changed the earphones and nothing works. Music sounds with very bad quality. Is it configuration problem?, is it itunes problem?, is it a manufacturing problem?. What can I do?
    I appreciate you help

    It takes around 2 weeks to get a replacement, a bit less if it is not personalised. Apparently a lot of the ipods coming out of China have audio/visual problems at the moment. Guess they should work on their quality control process.

  • The hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    it might be a malfunction in your device. you might ave to send it to repairation
    1.ave you try resetting it or restoring it?
    2. did your hold boutons whas working beffor?

  • Any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station pls

    any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station please ? classic working fine, so not the fault of the station itself ? it's been bought as a present for my father & he's confused !

    Check the headphone jack with a flashlight and clean it if necessary. The jack on a new Nano is very tight, be sure you push the headset jack all the way in, the plastic on the headset jack should be flush with the body of the Nano.

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

  • When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the o

    When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the original in my work folder. I need to know how to stop this from happeing and get it back to the way it has been working he last 6 months since i purchased this program.

    Hi pissedadobeuser,
    Does this issue occur with any particular web page?
    Are you able to print the webpage to 'Adobe PDF' to convert it to pdf.
    Which Browser version, OS version and Acrobat version are you using?
    Regards,
    Rave

  • Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
    Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
    If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite.

  • No calls are going through or coming in, also my sms/mms does not work the only thing that seems to be working is mobile internet anyone help???

    No calls are going through or coming in, also my sms/mms does not work the only thing that seems to be working is mobile internet anyone help???
    When I try calling someone it beeps twice and says 'call failed' also when someone tries calling me it does not come through. Also SMS/MMS cannot be sent or recieved. Only mobile internet is working
    iPhone 5s
    ANYONE HELP???

    Restart your phone by holding the power and home button until the Apple logo appears. If that does not solve the issue contact your cell provider so they can resolve the issue.

  • Hello, I purchased design premium 4.0 German Windows  (LIZ 390232 from 22.02.2010) from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not  disable the product key. He loaded it, but onl

    Hello, I purchased design premium 4.0 German Windows  (LIZ 390232 from 22.02.2010) from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not  disable the product key. He loaded it, but only in Englisch (trial version?) Please help me for the next step. I have the license agreement in my hand.

    Moving this discussion to the Downloading, Installing, Setting Up forum.
    Jakobh53157856 before you begin the installation process please complete the transfer of license process to transfer the Adobe Creative software license you wish to utilize to your possession,  You can find details regarding the transfer process at Transfer an Adobe product license.

  • The remember me dialog box does not work since I upgraded to OS 10.10.1 and Safari 8.0

    The remember me dialog box on various web sites does not work since I upgraded to OS 10.10.1 and Safari 8.0

    Try running the combo update.
    10.9.2

  • With IOS6 3G does not work.  This has already happened with IOS5.1, was only solved with IOS5.1.1.  More anyone have this problem? How do you solve?

    With IOS6 3G does not work.
    This has already happened with IOS5.1, was only solved with IOS5.1.1.
    More anyone have this problem? How do you solve?

    This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

  • Kenwood X991 & iP200 cable with iPod 5th Gen 80GB does NOT work correctly

    I have a conundrum. My wife has the 4th Gen v1.2.1 iPod 30GB which works fine on my Kenwood X991 Head Unit. I recently purchased the "new" 80GB iPod 5th Gen with the latest version "1.0.2" which does NOT work properly. The iTunes software tells me that this 1.0.2 is the latest software.
    When I attach my iPod to my stereo, it states "Reading" for eternity. It DOES play music but only plays Alphabetical Order ONLY. There is no ability to stop, change, fast-forward, reverse, etc....the only thing you can do is click "Source" to change to CD Player or Tuner, etc...
    Does anybody out there know what is going on? I have a request into Kenwood as well. Thanks in advance for all your help!
    -Kingofbytes

    Thanks for the help. It's an iPod Classic then 80GB. The unit plays when plugged in but does not allow searching, or switching songs nor displays as it is supposed to. My wife's 30GB works with no problems. Of note:
    Her 30GB = v1.2.1
    My 80GB = 1.0.2
    Mine is newer by about 6 months. Both are the latest software according to the screen.
    Kenwood has said to "reset the head unit" and "make sure I've got it plugged in properly". I need to try the reset part next but the last statement is funny to me. I can install a head unit, amplifier, re-run all speaker wire, install a Dual 10" subwoofer box, solder and wire tie all connections from a factory unit to a 3rd party Cable manager kit, but I need to "make sure" I know how to plug in an iPod cable.....laughable.

Maybe you are looking for

  • MSI gtx 770 twinfrozr "no signal detected"

    Hello! Just got a new GPU and installed it and all, but when i´m starting my system my monitor doesn´t start and just show a box with the text " no signal detected" and then goes black. The system sounds normal and every fan starts but still the moni

  • Oracle PL/SQL or JavaScript Interaction with a PDF Document

    I'm new to LiveCycle - be gentle. . . :-) My department is attempting to develop a web application which will, among other things, generate fixed layout forms filled with data from the database or from an application web page. The web pages for this

  • Reading integers from file problem...

    I managed to read integers from a file but only the ones from the first line. I can't somehow read the remaining lines. The format is... 33 212 3111 12 1 1 123 2 3 4 I know that the first while loop pretty much does nothing... Any help is appreciated

  • IMac need to move my data to MacBook

    Hi I'm going to send my iMac to assistance, because it seems to me that it has an impression problem on display It is a 24 of 2008, and when it boots on the with background I can see the dock gosth image Since I has a MacBook that I don't rall use th

  • Adobe Professional XI crashes when attaching files to Outlook 2013

    After opening a PDF if i chose the option of attaching to an email by clicking on mail icon the pdf will attach and send followed by Acrobat hanging and crashing. This behavior is consistent. I am using Outlook 2013 (32 bit) with Windows 8 (64 bit).