My iPod Nano is ,,dead" after formatting it

Hi. I've got a big problem
I bought an iPod Nano 2GB yesterday and i had problems with updating it, so I've formatted it (not restored- formatted using the right click in My Computer and ,,Format") And still the software didn't want to install... So I've restarted computer and unplugged iPod.
And now, it doesn's want to turn on (I think, that battery's full, beacuse I've charged it about an hour earlier). Maybe it's the fault of format? I've plugged an iPold and nothing happens... it's dead... ;(

Hello,
Have you seen this article?
iPod won't turn on
Does your iPod respond if you try to reset it? (hold the "menu" and "select" (center) buttons together for 7 seonds until the Apple logo appears on screen).
After you try resetting it, does your iPod display anything when you connect it to your computer, or not?
Deos your iPod correctly go into disk mode if you try?
How to put your iPod into disk mode
Have you tried a restore on your iPod? Or do you get any error messages when trying to acess the iPod Updater? See this link for details about this...
Restoring your iPod to factory settings
-Kylene

Similar Messages

  • My iPod nano needs to be format, but it doesn't format using fat 32. And it says that it is corrupted. What should I do?

    My iPod nano needs to be format, but it doesn't format using fat 32. And it says that it is corrupted. What should I do?
    As I connect it to itunes, it shows that it needs to be format. When I try to format it (fat32) it doesn't finish. And it says, the ipod appears to be corrupted.

    similar to what is happening to me....the difference is, after restoring itunes detect ipod and ask to restore again and again....
    I know it may look kinda stupid but: just leave the ipod there for about 2 minutes, that's about the time my itunes is taking to detect my ipod...if it doesn't work, try connecting ur ipod to other computer with itunes (no need to sync, just to check if itunes will recognize) to check if the problem is with the ipod or with the itunes and/or computer.

  • I'm just wondering.. Will there be a 32GB iPod nano in the after years? That'd be awesome if they will do make it... ;D

    I'm just wondering.. Will there be a 32GB iPod nano in the after years? That'd be awesome if they will do make it... ;D

    http://www.apple.com/feedback/ipodnano.html

  • My iPod nano 6 stops after 2 minutes playtime

    My iPod nano 6 stops after 2 minutes playtime

    Contact Apple Support or visit Genius Bar to have your ipod checked.

  • IPod touch completely dead after attempted update to 3.0

    Cross-posted to "with Windows" forum...
    ...Not only during update to 3.0, but also during update to 2.2.1 and during a restore attempt 6 weeks ago. All 3 "dead" iPods have been replaced by Apple - I'd like a solution...
    I have videoed the update taking place and the iPod dying during it - sadly it is in MOV format (439MB) and I cannot convert to an uploadable version for Youtube... By DEAD, I mean, no power and will not display ANYTHING on the screen. Simply won't power up again.
    This is what happens: Download update using iTunes... Extracting software... Backing up iPod... Preparing the iPod for the software update... (iPod shows USB plug and CD - then apple logo...) then the updating progress line appears on iTunes and on touch. Updating iPod software... Verifying updated iPod software... Updating the iPod firmware... White progress line on iPod disappears after a few seconds and screen goes black. Error message displays on iTunes - "The iPod xxxx could not be updated. An unknown error occurred (6)"
    iPod is now dead and needs to be replaced,
    1) Has anyone experienced this?
    2) Has anyone SOLVED it?
    Maybe related is a problem with some videos that have happened recently (and were the cause of me trying to restore the iPod last time it died) MP4 (or MPV files) play for about 20-30 minutes, then screen goes white, then black, then apple logo appears, then iPod returns to home screen after about 30 seconds. My usual solution to this has been to remove all videos, photos (which are corrupted by this time), audio, and then re-sync back.
    I'd appreciate ANY help please. I intend buying an iPhone soon and would like to know that the problem won't occur on that, every time I try to restore.
    Cheers!
    Martin

    To begin the discussion, let's throw in a few possibilities:
    1. Is your iPod in the process of being "jail-broken"? If so, I'd avoid the risk and stick with standard Apple firmware. Some hacks end up with dead iPods.
    2. Do you use iTunes for syncing? Only use Apple software for managing your file system.
    3. Are you Windows or Apple? For whatever it's worth, I've only seen this happen with Windows machines.
    No solutions here - but maybe some hopeful suggestions.

  • IPod Nano 3G - dead as soon as taken off charger - new battery fitted

    A couple of years ago my girlfriend won a 4gb iPod Nano 3G in a raffle. As we both had other iPods, it has been sitting in a drawer ever since. The other day I found it, and thought it would be useful for using in my car.
    It was still sealed in the box - so I opened it, connected to iTunes, registered it, and synced it.
    As soon as I unplugged it, the screen died. I couldn't get it to switch back on without plugging it in. When plugged in (computer or mains) it works fine. As soon as its unplugged it immediately switches off.
    As it had been sitting unused for a couple of years, I presumed the battery was dead. I ordered a replacement from eBay - which arrived today. I soldered in the new battery, and left the iPod to charge for a while. The same again - when I disconnect it from the computer, it dies before I've even got the dock plug right out!!
    Any ideas? I've tried restoring it with the latest firmware, and I've also tried manually resetting it using the Menu / Center buttons.

    I have the same exact problem and situation, took it out of the shelf after two years unused! Any luck?

  • IPod nano connection probs / gotta format every time / iTunes erases songs?

    Hi there,
    I got a 1GB nano just about a week ago and I keep having connection problems (I'm using an Acer TravelMate Laptop running Win XP).
    I have to format the nano, un- and re-install iTunes + the iPod Updater and and restore my iPod EVERY TIME I want to upload some songs. So the formatting etc. solves the problem only temporarily. If I try to update the songs on my iPod after some days, iTunes seems to erase everything and I have to go through the whole procedure again. This is so annoying!! Can anyone help?
    iPod nano 1GB Windows XP

    First, make sure you are running the latest versions of your OS. You should be running the latest service pack for whatever version of windows you are running. Here are the basic system requirements as stated in the Apple store:
    Mac Requirements
    USB 2.0 port
    Mac OS X v10.4.11 or later
    iTunes 8 or later
    Internet connection (broadband recommended; fees may apply)
    iTunes Store account
    PC Requirements
    USB 2.0 port
    Windows Vista or Windows XP Home or Professional (Service Pack 3 or later)
    iTunes 8 or later
    Internet connection (broadband recommended; fees may apply)
    iTunes Store account
    Second, start the process with the iPod connected directly to the system, not through a USB hub. See if this changes things for you.
    Also make sure you have gone through the basic troubleshooting as stated here:
    http://www.apple.com/support/ipod/five_rs/nano/
    If problems persist, it may be the installation of iTunes that is causing trouble. Uninstalling iTunes and re-installing could clear things up. Here is a link to instructions on removing iTunes:
    http://support.apple.com/kb/HT1926
    Of course, start with the easy things first and work from there. Hope this gets you running smoothly.
    i

  • IPod nano gen 4 Mac formatted: if I do a PC format, will it wipe out existing songs, audiobooks etc.?

    My PC wants me to format the nano. Will this cause all the existing data to be wiped out and the Mac reformatted to work on that computer again?

    Niel, does this mean a PC (Windows 7) formatted ipod nano can be synched on a Mac (with songs, etc.) and comingled with data previously synched from the PC? What I would like to do is download into the ipod nano stuff from both the PC and the Mac with the PC being the primary computer connected to the nano.

  • IPod Nano battery dies after 2 days in Sleep

    My iPod Nano is about 2 years old and is working great for the most part. When fully charged, I can listen to music for 6-8 hours before the battery dies. But, if the iPod is fully charged and not connected to my computer and put in sleep mode, the battery is fully depleted after about 1-2 days. Is this normal? I know that even in sleep mode, the iPod will draw some power from the battery, but I thought it would stay charged for longer than it is. Any suggestions?
    I have checked that it is not getting awakened by any alarms. Do I need a new $59 battery?
    Thanks.

    I agree with you on the wallsocket charging thing, it's a must have, really. The case is a different thing.
    People would get stuck with a generic case, and not have one they liked. Now, you can buy whatever color/shape you want, without hassle.
    The reason I got a white one: the earplhones, the radioremote and all other things are white. If black ones were included/available, I'd have gotten a black one.
    Oh, and I have mine 1.5 months now, and am as happy as a clam. I used to have a portable CDplayer with MP3 capabilities, but it was HUGE. This fits in my shirt pocket, doesn't have any moving parts (no skipping when running), and is just about as cool as it can get.

  • Ipod nano shuts down after playing a few minutes

    I have an 2week old ipod nano and I updated it yesterday. Now it shuts down after a few minutes playing and I really don't know why. I worked perfectly before the update!!

    planb77 saved me!!
    He is right! i had exactly the same problem and didnt know what to do. I was really frustrated and was ready to send my new ipod back to apple store! 
    The headphones need a good push, you shouldn't see any metal whatsoever.. I was afraid to push it in case i broke it. 
    When you do it right you should hear a clicking sound.  Now my ipod works just fine!
    thanks a lot for the advice!

  • Ipod nano turns of after short amount of time

    My Ipod nano 6th G turns off after about 30 seconds. I was wondering if anyone knew how to fix it.

    Make sure the headphones are plugged ALL the way in, meaning the white part of the headphones is flush with the Nano.  No silver from the headphone's plug should still be seen.
    B-rock

  • Ipod Nano replacement -  sent after t

    I sent my Ipod nano off to be replaced, months after receiving the packing from apple. I first tried to re-register for the replacement, but it stated that it had already been registered. So I then used what i have previously received, I still have not heard back from Apple and when checking the status online it says repair doesnt exsisit. I just realised that they had emailed me to say the repair had been cancelled, this was before i had sent it off.
    What do i do? can i get it back, or get it repaired??
    i sent it with the paper work from the first request.

    You need to call AppleCare.

  • My ipod nano isnt working after charging after the battery low message came on. What do i do the touch screen wont work. is there a warrenty if I bought it in Dec of this year?

    Please help me. After charging my ipod nano the touch screen does not work.
    what should I do ?

    You have posted in the ipod touch forum.
    Perhaps you should post in the ipod Nano forum.
    The ipod has a one year warranty.
    Have you tried basics form the manual?
    Restart.  Rest.  Restore.

  • Why does my ipod nano shut off after taken out of charger

    Whenever I take out my iPod Nano Generation 6, out of the charger cord, it works until I press the power button, and stays in sleep mode. Even after holding the power button, it won't turn back on.

    This used to happen once in a while with my ipod classic.  You need to "reset" the ipod.  For the 6th Gen. Nano, try holding down the sleep/wake button and the volume down button simultaneously, for about 8-10 seconds, or until the apple logo appears.  You can also see the info here: support.apple.com/kb/HT1320

  • TS3474 Why does my iPod Nano turn off after one minute of use?

    I just got a new 16 GB iPod Nano and it turns off after one minute of use.  Why does it do this?

    I figured it out.  Headphones were not plugged all the way in.  This support community is awesome.  Thanks everyone.

Maybe you are looking for

  • Is there any simple way to close a group of PO's?

    Hello All, I was looking an answer for my question on forum but didn't found anything which could help me to solve my issue. I would like to close a group of PO's in some period of dates. Is there any simple way to do this? I mean transaction for exa

  • Question about watermarks

    Hello, We have adobe acrobat standard 8.0 in our office and trying to set up watermarks. After adding the watermark, it shows fine on the screen but when I print the document, watermark covers all the texts and unable to read. We recently had adobe r

  • I can't get java to run, why?

    I have Java installed, correctly I think, and I can't get it to work. I've checked the issues that were mentioned on the java site and still nothing. I don't know why it doesn't work or more importantly how to fix it. Any ideas on what I can do? Than

  • Will this hard drive work/fit in my macbook 5.1

    http://www.newegg.ca/Product/Product.aspx?Item=N82E16822152234 I have a macbook 5.1 with a 160GB harddrive and I was thinking about upgrading it a bit. I would prefer a 320GB/500GB harddrive that would work, but my friend said this one might too. If

  • Steps for a XI scenario file on portal server to ECC table.

    Hello Experts- I am trying to populate a R/3 table with data from a text file on portal server (AIX). Can any one please give provide with a high level steps on how I can acheive this. How can I make XI look for file on Unix system? Do I need to crea