My ipod nano is frozen, but my hold switch is broken so I can't reset it.

I have an 8gb ipod nano. When I plugged it into my computer to sync it it said I had to restore it.  I clicked restore, but it said the ipod couldn't be found and then my ipod froze. I can't reset it because my hold switch no longer works and toggling it doesn't do anything.  Is there a way to fix it?

Try:                                               
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and                                           
RecBoot tip
RecBoot may have problems on 64X windows, then try:       
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC       
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable       
- Try on another computer                            
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar                                     

Similar Messages

  • IPod Nano shuts off even after hold switch engaged...HELP!

    I have a new iPOD Nano. When I run, I engage the hold switch. Even when I do that, over half the time, the iPOD still shuts off on its own after < 1 minute. What am I doing wrong? Thanks.<br>
    iPOD Nano    

    Thanks. How do I know if its on sleep? Then, how do I turn that off? Thanks again for any help you can provide.

  • Help please! Ipod nano is frozen black, comp wont recognize it +more...

    hello all, I am asking for your assistance in a problem, my 1g ipod nano is frozen in a black screen, and whenever I plug it into my computer, nothing on my computer recognizes it and my ipod make's this weird low pitch schreeching noise, any information would be helpful, I have tried reseting it.

    My ipod it doing something really simmilar to this as well,
    it will charge fully, and then i listen to 2 songs and it shows the battery meter as red, AFTER TWO SONGS!
    but that was last week,
    now it doesn't do anything. It just shows a symbol of a dead ipod and with the apple website.
    I really need my ipod back, and i cant afford a new one right now
    please please help me!
    i've tried restarting it, but it wont, it just shows the symbol i explained before
    thanks
    please help me!
    Soph

  • HT1339 I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?

    I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?

    Try doing a level reformat of the iPod's flash storage instead to see if that kills the restore loop using the instructions in the article below.
    http://www.methodshop.com/gadgets/ipodsupport/erase/
    B-rock

  • I still have my iPod Nano 3rd generation, but my old computer crashed and I did not have itunes backed up, so I lost my library. Is there a way to get the songs from my old ipod to new computer library and then on to the new ipod?

    I still have my iPod nano 3rd generation, but my old computer crashed and I did not have itunes backed up. Is there a way to get the music from ipod to new computer library and then on to the new ipod ?

    Save all the photos from your Droid into a folder on your computer.
    Connect your device to your computer. On iTunes left Pane, select iPhone under 'Devices'; then on the right Pane, select PHOTO tab.  Make sure Sync Photo box is checked, and "from" box selected the folder that has Droid's photos.  Then click the SYNC or APPLY button on the lower right window.

  • I got a new iPod nano 7th gen., but when I tried downloading a video from my iTunes library a message popped up that said: Some of the videos in your iTunes library cannot be copied to your iPod because they cannot be played on this iPod.

    I got a new iPod nano 7th gen, but when i tried downloading a video from my iTunes library a message popped up that said: Soem of the videos in your iTunes library were not copied to yor iPod because they cannot be played on this iPod. What should I do?

    I kept having a similar problem - 3 out of the 10 videos I had on iTunes wouldn't sync. They were in the right format and I KNEW they worked on my iPod because I'd RECORDED them on my iPod. I finally figured out what to do! Go to the movies in your iTunes library. Click on one that does not sync. Click on "Advanced" at the top of iTunes and choose "Create iPod or iPhone version". Once that's finished, be sure you delete the old version so you don't keep getting the error (or have 2 copies of the same video) and sync. This should eliminate the problem. At least it did for me!

  • After software update, I can see the songs on iPod nano in iTunes, but I cannot play/move the songs from iTunes.

    After software update, I can see the songs on iPod nano in iTunes, but I cannot play/move the songs from iTunes.

    Is the "software update" for iTunes 12?  Or something you did to the iPod?

  • My iPod Mini 3rd Generation isn't recognized in My Computer or iTunes. I can't even restore it without iTunes. The same thing happened with my iPod Nano 3rd Generation, but that one worked for a while, and suddenly went unrecognized.

    My iPod Mini 3rd Generation isn't recognized in My Computer or iTunes. I can't even restore it without iTunes. The same thing happened with my iPod Nano 3rd Generation, but that one worked for a while, and suddenly went unrecognized.

    Hi TherAscendedSaiyan,
    Welcome to Apple Support Communities.
    See this troubleshooting article that addresses the symptom you're encountering:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Best,
    Jeremy

  • HT1363 My ipod nano 3rd generation appears to be in disk mode, I've tried to reset it per instructions, but it will not reset

    My ipod nano 3rd generation appears to be in disk mode and it will not reset. can anyone help

    Try to reset it more than once if necessary.  By a reset, I assume you mean, toggling the hold switch on and then off, then pressing and holding both the Select (Center) and Menu buttons together long enough for the Apple logo to appear right?
    If nothing else, you'll need to let the iPod's battery fully drain.
    B-rock

  • HT1320 My Ipod classic is frozen with the "do not disconnect" logo on what can I do to un freeze it?

    Hi my ipod classic is frozen with the "Do Not Disconnect" sign on what can I do to unfreeze it ?

    I plugged my ipod video into my xBox 360 and
    disconnected it. My ipod froze with the do not
    disconnect sign on it, i tried to unfreeze it(I read
    the support section) but it won't do
    anything.
    Dell Optiplex
    GX1p   Windows XP  
    This happened to me aswell, but it happened to me when I plugged it into the PC but same problem. what you have to do is move the 'Hold Switch' to put it on hold and then move it back again and then hold both the 'Menu button' and button in the middle of the click wheel. then it will turn off and then come up with the Apple logo and then it will work fine and you can try again. (P.S: If it doesnt show the Apple logo just try pressing any button
      Windows XP  

  • TS1538 i have tried all of these troubleshooting techniques, have taken it to an apple shop and had my ipod restarted and wiped but still no luck, is there software that can reunite my ipod with my laptop?

    i have tried all of these troubleshooting techniques, have taken it to an apple shop and had my ipod restarted and wiped but still no luck, is there software that can reunite my ipod with my laptop?

    What do you mean by "reunite". Are you experiencing connectivity issues between your iPod Nano and your iTunes on your PC? If yes, in what do these issues consist? Are there any error messages you are being returned?

  • HT1535 I would like to move my songs from my ipod nano back on to my freshly reinstalled windows and iTunes.  Can that be done?  I turned off automatic syncing so I can charge up the ipod.

    I would like to move my songs from my ipod nano back on to my freshly reinstalled windows and iTunes.  Can that be done?  I turned off automatic syncing so I can charge up the ipod.  Help!

    You won't be able to, just by navigating out the iPod's photos folder in iTunes. You'll likely need the help of some sort of third party software to get the job done for you.  One thing you'll want to keep in mind about these photos is that they are no longer in their full resolution, but instead are scaled down thumbnail versions that were optimized for viewing on your iPod's Video smaller 2.5" LCD display.
    Here is one such product.
    http://www.macroplant.com/phonetopc/
    Google for more.
    B-rock

  • I have a Ipod Nano and want to get another one , and use both. Can I use the same computer and library for both?

    I have a Ipod Nano and want to get another one , and use both. Can I use the same computer and library for both?

    Yes

  • I don't know which Apple ID I used to register my Ipod Nano. I had to restore my Computer and now I can't connect my iPod to iTunes again. I have my serial number and ECID

    Hi, I don't know which Apple ID I used to register my Ipod Nano. I had to restore my Computer and now I can't connect my iPod to iTunes again. I have my serial number and ECID. I'm using Windows, BTW, sorry!

    Search your email for the word Logic (and set the search to All) and you should find the receipt (so long as you didn't delete it)
    Other than that.. simply contact Apple directly and ask.. Make sure you have your transaction details ready for them as they will need it...
    http://www.apple.com/contact/

  • I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?

    I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?
    I have a 2012 mac book pro can I use that to connect with firewire and load osx that way? and how woudl I do that?
    Thanks so much!

    To what password are you referring? Do you mean your user account's admin password? Or do you mean the master password for File Vault or do you mean a Firmware Password?
    For an admin password:
    Forgot Your Account Password
    For Snow Leopard and earlier
         Mac OS X 10.6- If you forget your administrator password
    For Lion/Mountain Lion
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password and
         OS X Lion- Apple ID can be used to reset your user account password.
    If you cannot do the above then try this:
      1. Boot to Safe Mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
      2. At the prompt, type the following commands pressing return after each command line:
         /sbin/fsck -yf
         If you do not receive a "Filesystem OK" message then repeat this command until
         you do.  If after seven tries you still do not receive a "Filesystem OK" message,
         then the system is corrupted and needs to be reinstalled.
         mount -uw /
         cd /private/var/db/netinfo
         mv local.nidb local.old
         rm ../.AppleSetupDone
         shutdown -r now
    The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
    This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
    How to reset the OS X password without a startup CD:
    Reboot into Single-user Mode. Enter the following and press RETURN after each command line
       1. Type fsck -fy
       2. Type mount -uw /
       3. Type passwd <username>
    I have never tried this method myself.

Maybe you are looking for

  • Workaround to import video in FCP 6.0.5 under Leopard

    On behalf of a FCP user under Leopard with FCP 6.0.5 I would like to ask you how to import video from a Panasonic camcorder using some strange format. The workaround now is to import it on another machine under Snow Leopard with iMovie, export it as

  • Pie Chart displaying percentages

    Good Morning, I'm hoping someone has had experience creating a pie chart with percentage values and is wiling to offer some assistance because I've tried many ways and still came up short. The data table I'm using contains two columns: type (A, B, C,

  • What's the best way to use business objet?

    Hi all, Anybody can explain what's the more efficient way to retrieve data from the database by using business objects? I would like to load business partners information, but I'm using SBob object and recordset and it is very slow... If anybody have

  • Email settings on a mac

    I've just changed from a bt home hub to a netgear router (to get a better wireless signal) but now I can't send emails from the mail function on my imac (can't connect to smtp server) - I can still receive messages though.  I can send messages if I l

  • Using flash inside Spry

    Hi everyone, I have a problem with spry. I´m using "updateContent" of Spry to load the contents of my site. However, it seams that it doesn´t works well with Flash. If I put the flash movie on the html, the dreamweaver puts a script "AC_RunActiveCont