My ipod nano is not showing up on spotify, what to do?

i want to get my music synced to my ipod via spotify, but when i plug in the usb to do so, it does not show up

https://www.spotify.com/us/blog/archives/2011/05/04/spotify-says-hello-to-the-ip od/

Similar Messages

  • My ipod nano is not showing up in iTunes or on my Mac

    My ipod nano is not showing up in iTunes or on my Mac
    sprinklsgirl

    this document is a good place to start with those issues:
    iPod missing in iTunes and Mac desktop
    but if you get no joy with that, try reposting in the "iPod nano" forums. here's a link through to those forums:
    iPod nano

  • IPod Nano does not show under Devices (in iTunes) but is recognized in My Device and Printers (My Comouter) as "Unspecified"

    My ipod nano is not showing under the devices tab in iTunes however, is is recognized in My Computer (Devices and Printers) as "Unspecified" I just want to be able to sync and add/remove music!!!

    Hi there!
    have you tried any of the steps mentioned here?
    http://support.apple.com/kb/TS1363

  • Ipod Nano icon not showing in  itunes and I've tried everything suggested

    My ipod nano is not showing in itunes and I've tried everything that has been suggested by Apple.  I updated iTunes, I've reset the ipod.  I just want to download my songs!  Help! Please and Thank you.

    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • My daughters ipod nano does not show up in her itunes

    My daughters ipod nano does not show up in her itunes on her computer. It has error message ipod has been detected but could not be identified properly. we have uninstalled itunes and reinstalled with the same error message. Her itunes is 10.2 .1.1 version.  If you plug her ipod into my computer/itunes it works just fine. I am also using version 10.2.1.1 
    We have tried updating to 10.5.2 itunes but it runs for ever and then says it can't update.
    help please?

    iPod appears in Windows but not in iTunes

  • HT1351 My 2nd generation iPod Nano is not showing my new playlists after syncing (the playlists were created in my computer).  Help!

    My 2nd generation iPod Nano is not showing my new playlists after syncing (the playlists were created in my computer).  Help!

    So, your iPhone (and new shuffle) still work properly with iTunes, correct? 
    Your 1st gen shuffle... It's the white one with USB plug, that looks like a USB flash drive...?
    Are you able to see it in Windows, and maybe change the drive letter back to E:?

  • TS3716 installed the new itunes and now my ipod nano  does not show in the device menu

    installed the new itunes and now my ipod nano  does not show in the device menu

    There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
    The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
    If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
    Then you'll find the control in the Store menu:
    Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

  • My ipod nano will not show any music on it after syncing or manuallly adding it, but the information still takes up space in ipod

    I have tried to put music on my ipod nano 3rd gen both manually and syncing it, but it never shows up after I eject my nano. The songs I put on will take up space, but the ipod says no songs. I have restored it multiple times and nothing has helped.

    Hey there Eduardo_09,
    It sounds like your iPod Nano is not appearing in either Windows, or iTunes on your computer. I would use the troubleshooting from the following article to help isolate and resolve the issue:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Here is step 1 to get you started, but there are additional steps within if needed:
    1. Start with the iPod Troubleshooting Assistant
    If you haven't already done so, use the iPod Troubleshooting Assistant that applies to your iPod. This will often solve your issue.
    If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I am a Taiwanese. My iPod nano can not show the lyrics

    My iPod nan can not show the lyrics.It will be like"ifhfjdghuiadhghjkbdbdjkbdgdnkjn589d567g564h54df+.......................... "
    Why?
    How to solve it?

    Right->click on these tracks in iTunes and choose Get Info.  Then head to Lyrics tab.  Are the correct lyrics listed there?
    B-rock

  • My ipod nano is not showing up on my computer or itunes when I plug it in.  I have reset it and restarted computer, I have also downloaded new itunes.  My other ipod shows up fine so I know its not the computer or cord.

    My ipod nano 6th generation is not showing up when I plug it into the computer.  I have reset it and restarted the computer, I also have downloaded latest itunes.  My other ipod nano shows up so I know its not the cord or computer.  It is not showing up in itunes either.

    That seems to be a clear indication of an issue with your iPod and not your PC or USB cable. Have you tried resetting the Nano with it still connected to your PC? 
    How to reset iPod
    Does the iPod still charge when you have it plugged in?
    B-rock

  • IPod Nano does not show under Devices (in iTunes) but is recognized in My Computer and also iTunes opens up automatically when it is connected

    I dont think there is problem with iTunes; I uninstalled the right way and re-installed. And, moreover, my other iPod touch gets connected and synced perfectly fine. However the Nano 6th GEN just refuses to.. . Please help! Have tried all options under apple/support website, and uninstalled/ reinstalled drivers too.
    Using Windows 7, 64-bit operating system
    Some analysis that I did are below, with screenshots, hope it helps:
    Responses awaited....
    Snapshot of Devices when iPod Touch is connected:
    Snapshot of Devices when iPod Nano is connected:
    Snapshot of Device Manager when iPod Nano 6 GEN is connected:
    NOTE: This does not show when iPod Touch is connected.
    Under Device Manager-Portable Devices:
    When iPod Nano is connected: it shows up as "IPOD",
    When iPod Touch is connected: it shows up as "Apple iPod"
    Here is the screenshot for when iPod nano is connected.

    iOS: Device not recognised in iTunes
    Windows: http://support.apple.com/kb/TS1538

  • Ipod nano 4gb not showing in itunes or recognized as device

    Out of the blue my nano is not detected as a device with my Windows XP. First I tested my USB port to see if that was the issue. I connected a mouse which was recognized and worked fine. I then got another sync cord thinking maybe my cord went bad and that is not working either. When I used my old cord I received an error message that I exceeded the power limit on my hub port. Which is why I thought my cord was bad. With the second cord I get no such errow however the ipod is charging but doing nothing else. I've gone out to my device list to see if there were any visible errors or anything diabled and its not showing any. But its also not showing an ipod or mass hub device like it normally would. Any thoughts on the issue would be greatly appreciated!

    My ipod is doing the same thing. could you please tell me how you fixed it?

  • Ipod Nano does not show up in Itunes

    Cannot transfer songs to Ipod Nano.  Under devices it does not show up in itunes.  Also I cannot back up either.  The only thing that shows up under devices
    is Sharing.  It is showing up on My computer.  How can I fix this.

    Hi there Ireneclover,
    You may find the troubleshooting steps in the article below helpful.
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    -Griff W. 

  • My iPod nano will not turn on no matter what I do.

    I tried holding the play button to turn it on. I tried charging it for a couple of hours. I tried resetting it. I tried plugging it into my computer. None of this made it turn on or even make a flicker of light. What should i do?

    The iPod will need to be serviced, to determine the exact fault and repair it (if possible).  You can get the current 7th gen iPod nano as an Apple-certified refurb for $99 (with a one-year warranty)
    http://store.apple.com/us/browse/home/specialdeals/ipod
    so the cost to repair your nano may not be economical.  If you are the good at such things, this web site has DIY repair guides
    http://www.ifixit.com/Device/iPod_Nano
    Be sure to rule out the other possibilities.  If you have an Apple Store nearby, you can make a reservation at the store's Genius Bar and take it there (along with your docking cable).

  • My 6th gen Ipod nano does not show up in Itunes or in My Computer

    I do not think that this is a problem with my computer because I own an older 5th gen nano and have never had problems with it before. Both my computer and Itunes has no problem seeing the older Ipod right now. I have followed the troubleshooting guides and I'm still stumped on why my new Ipod won't appear. I've read several disscussions and haven't found the fix yet. My newer Ipod has been connected to another computer before but I don't know whether it was a Mac or a PC, and I believe that is the problem. I was thinking maybe it would help if I completely reset my Ipod, I don't mind losing any music, but I have no idea how to if I can't connect it to my computer. Please tell me how to reset it to facory settings or if you think that something else will work I'm completely willing to try that too. Thank you.

    Thanks for a reply
    The cable that I'm using came with my 5th gen nano. The 6th gen Ipod shows that it's connected but the computer doesn't see it, so I don't think that it's the cable.
    I did try this before when looking at the troubleshooting guide and nothing happens. It just resets and then the Ipod screen tells me that it's connected to the computer. It still is unseen by Itunes and no where to be found in my computer.
    I don't have another computer to plug it into at the moment but I may be able to visit a friend that owns a decent PC in a few days. If that doesn't work out I will be getting a new lap top in a week and I'm hoping that it will work on that, but it won't be a Mac. So, let's say it works when I plug it into one of these computers, should I reset my Ipod from there or is there something else I should do?

Maybe you are looking for

  • Video Output Windows 7

    So I recently upgraded my video card from a X1900XT to an eVGA 9800GT which I flashed to use the mac 8800GT bios. It works perfectly under OS X but when I try it with windows the monitor goes into low power mode as soon as I start booting (no video o

  • Using too much space

    I have a movie a little over 600MB, but when I try to use DVDSP, it will say the data is over the 4.7GB max on the DVD and won't burn. However, when I try to use DeVeDe on my Linux machine, it burns the DVD just fine.

  • When does a JTabbedPane set the size of the component inside a tab?

    I would like to know how big a component inside a tab is directly after I've added it to a tab in a JTabbedPane. I thought once I've "added" a component via the JTabbedPane.add(String, Component) method, the Component would be realized with correct s

  • Problem with pen tool, lines and blend tool

    I draw line 1. Then I break (click the arrow key and then click the pen tool again) and draw line 2 When I finish there is a puzzling gap on line 1 after where line 2 intersects: Then when I use the blend too the resulting abstract looks like - non-c

  • Help in finding out why itunes app can't connect to the server.

    Can anyone decipher the text below from All Programs, Administrative Tools, Event Viewer, Custom Views, Administrative Events as it may be relevent in finding out what's going on when itunes or anything isn't working right. The application-specific p