My iPod Nano no longer work, just appearing a complete white screen

e can not turn it on

Hello Tomás Beauchamp,
Thanks for the question. After reviewing your post, it sounds like you have a white screen on the iPod. I would recommend that you read this article, it may be able to help the issue.
iPod nano (7th generation): Hardware troubleshooting - Apple Support
Display
Follow these steps if your iPod doesn't respond to your input or has a display-related issue.
Screen is unresponsive and displays Apple logo or white screen
Reset iPod by holding down the Sleep/Wake button and Home button until you see the Apple logo appear. If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes.
If the Apple logo does not appear, or if the iPod is not seen in iTunes, connect it to iTunes and try to restore.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Similar Messages

Why does my iPod Nano no longer work with JVC TH-BC3 dock?

I have a JVC TH-BC3 soundbar with a built-in iPod/iPhone dock. My iPod now displays a "non-compatible" message on the screen when I when docked in the TH-BC3. What is the problem?

I sent the question to JVC's support desk and they sent the following reply -
Thank you for contacting JVC Customer Care. My name is Veronica, your email care specialist. We value you as a JVC customer and appreciate the opportunity to be of assistance.
I understand you are experiencing difficulties with your JVC TH-BC3 recognizing your iPod Nano. We do apologize for any inconvenience that this may have caused. What generation is your iPod Nano? By any chance have you recently updated the iOS? If so, it may just require a soft reset. Simply press and hold the Menu and Home button until the Apple logo appears. This will not erase any information on your iPod/iPhone, simply reboot the software. Please make sure the iPod/iPhone is not connected to the unit while performing the soft reset.
I performed the soft reset and tried my iPod Nano in the dock and it now works!

IPod nano no longer works correctly

I have an iPod nano and I have only just purchased it less than a month ago. Whenever it is laying somewhere not plugged in to the computer it will be a blank screen. If I press menu it will come up with a note that reads "use iTunes to restore" and than it shuts off again. It will do the same thing if I press menu again. when I connect it to my computer it makes a beep that acknoledges that is connected but won't show up on the left where it should. While it is plugged in it will say do not disconnect... and it will not stop saying that! I have tried reseting it s instructed in the manual but that doesn't have any effect. I have also tried disk mode which I don't totally understand but I tried it non the less. Anyway my question basically is how do I fix this and how could I possibly restore it via iTunes if iTunes does not recognize its connection. Please if someone knows what the problem is please respond and help me out. Thanks in advance - Skidd711
nano Windows XP

you've been doing precisely the right things so far, Skidd. see:
iPod displays "Use iTunes to restore" message

The center button on my 7th generation ipod nano no longer works

I have had my 7th generation ipod nano for about 6 months. It only stays plugged into my vehicle. 3 days ago, the center button quit working. It still plays music and the touch screen works, as well at the top on/off button. What can I do to fix this?

if it is warranty i would visit a apple retail store, be sure to set an appointment if you vist the store.

IPod nano does not turn on there is a white screen. What happened?

^^

Hi, DorianSigmaChi.
Thank you for using Apple Support Communities.
I would first start with resetting the iPod. Here is an article that walks you through the process.
How to reset iPod
http://support.apple.com/kb/HT1320
I am not sure what model iPod nano you have, so I will include a couple troubleshooting resources.
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Hope that helps,
Jason H.

Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

Yes, your battery is likely toast and in need of replacement. Not much else for troubleshooting here. Sorry.
B-rock

My ipod app no longer works. Everytime I go to open the ipod app it stays open for a second and then shuts down. I am not able to get anything to play either through the standard ipod controls or the multitasking control panel. I'm sure there will be an u

my ipod app no longer works. Everytime I go to open the ipod app it stays open for a second and then shuts down. I am not able to get anything to play either through the standard ipod controls or the multitasking control panel. I'm sure there will be an update soon to correct this, i just wanted to see if anyone else was having the same problem.
wen i open ipod in my iphone ,, it gets stuck ,, and get backs to the menu ,,, and doesnot play anything ,, not video nor song

If your phone is not officially unlocked by the carrier in the UK, you can not use the phone using another SIM, unless you modify the software or the SIM, which can lead to unexpected results, such as non functioning apps.
Unauthorized modification of iPhone OS has been a major source of instability, disruption of services, and other issues
Problems resulting from those modifications can't be discussed in these forums, due to the Terms of Use

Ipod touch no longer working with isimple device?

I have a 4th gen Ipod touch that was working just fine with my isimple device in my vehicle until I believe I updated the ipod to the latest firmware. I now recieve a message saying device is not compatible with Ipod, Is there anyway I can rollback to the previous version which I believe was 6.1.2? Thanks!!

Downgrading the iOS is not supported by Apple.
Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Go to the devices support site and see if they have anything. Maybe a firmware update is available. Otherwise you will have to wait for a firmware or iOS update.

Ipod Nano won't work. HELP!

Yesterday I tried to play my ipod nano and nothing worked. It is on and the main screen comes up but none of the buttons will work. I charged it then went online and did the hold button back and forth trick and holding the menu and select button down but nothing makes it unfreeze. I can't play it in the car or anywhere. It just stays on with no buttons working. What can i do?

it seems a hardware issue, you can try try iPodResQ at your own risk
http://www.ipodresq.com/index.php

IPod nano 1st generation doesn't appear in iTunes vers. 9.02 - HELP

Since I upgraded my iTunes to the latest version 9.02, my iPod nano (1st generation) doesn't appear and I cannot synchronize it. Tried to change USB port, no result. Tried to uninstall iTunes and install earlier version 8.2 for Windows XP, but it won't open, saying that "the iTunes Library.itl cannot be read as it was created in a more recent iTunes version". What am I to do if I want to keep using my old nano?
Desperate Sapiapple

I am having a similar problem. Dusted off my daughters old nano to take to the beach. Tried setting it up on the old lap top I am taking with me and I could not get it working. After hours of diagnostics and troubleshooting matrixs it seems that I did not have drivers. Apple's troubleshooting says go to microsoft, MS's says go to apple for the drivers. Shows up as a faulted device. Did the updates to the USB drivers, etc. Put the player in disk mode (still would not recognize) My laptop says yes I have an I pod but it cant find the drivers to install it My other old laptop running old I Tune software seems to have no problem. I thought it was my problem I was wasting a
Sunday on, now I am thinking that this is a problem with this latest version of I tunes.

Ipod nano playlist not working need help plz

my ipod nano playlist not working i'm a runner so i set my songs in the order i want them and for the last week they don't play in that order its random.it just skips around the playlist and is really anoyying. not sure what gen my nano is i got it in novber 2011. would love some help thanks

iPod Tutorials
iPod Repair Tutorials
iTunes & iPod Hints & Tips
iPod nano Troubleshooting Assistant
iPod Troubleshooting Assistant

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
Can you help me?
Thanks

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

IPod Touch no longer working with car Head Unit since update

Hi there, I have a problem with using my iPod Touch with my car's head unit.
I've been using my iPod Touch with the Alpine IDA X001 Head unit fitted in my car for the last 3 months without any problems, however I installed the latest software update for the Touch (v4.0) and now the head unit connects and then says no USB device. At first I thought it was the cable as the cable supplied with the head unit is pretty fragile, so I've replaced it with a new one but it still doesn't work.
I've tested with my iPod Nano and it works perfectly so its not a problem with the head unit or lead (I plugged the Touch in and it didn't work, plugged the Nano in and worked perfectly and then plugged the Touch in and didn't work).
Can anyone help or is it gonna be a case of Restoring the iPod Touch back to factory settings ????

I was also having this problem with my Kenwood car stereo. I went into the store and they did a complete restore. I didn't think it worked but the next time I plugged it into my usb to connect with my car stereo it worked. So you might try doing a restore.

Ipod Nano Setup Assistant does not appear!!!

I am using an HP PC (64 bit)with Windows Vista. I have installed the 64 bit edition of i Tunes, and I have tried EVERYTHING the troubleshooting assistant has suggested (several times) and the "ipod nano setup assistant" fails to appear after I install the itunes/QT and connect the ipod nano. PLEASE HELP!!!

No. But you should still have a backup of your user data, including your iTunes data.
If you want to completely remove and reinstall iTunes, this document explains how to do it (assuming you use a Windows PC)
http://support.apple.com/kb/ht1923
You may want to try these suggestions first
http://support.apple.com/kb/ts1363

My secondary e-mail address used on my daughter's ipod can no longer work. It states, that it is already in use with another apple id. She used it for weeks before this happened.

My secondary e-mail address used on my daughter's ipod can no longer work. She uses this as her imessage texting. First it needed to be verified. Once I tried to verify it on appleid support, It states, that it is already in use with another apple id. She used it for weeks before this happened.

Maybe:
iOS: Troubleshooting FaceTime
iOS: Troubleshooting FaceTime and iMessage activation

My iPod Nano no longer work, just appearing a complete white screen

Similar Messages

Maybe you are looking for