My ipod nano won't turn on when it's not plugged into my laptop

Hey this is really getting me worried.i bought this ipod nano on ebay and it arrvied today. i plug the ipod nano into my laptop and it will work reconises it fine and will charge and sync but when it says it's fully charged i unplug it and the ipod just won't turn on atall and then when i plug it in the laptop again it says charging. I tried resetting it but still nothing happened
What's going on with my ipod?
i'm really scared i bought a faulty ipod.
Help

Try this to start with:
[The 5 R's|http://www.apple.com/support/ipod/five_rs>
Dont be worried- If you ipod is under warranty, and you haven't caused it any harm yourself(ie.if its a problem from Apple's side), then you can get your ipod replaced
stealth..

Similar Messages

  • Ipod touch won't turn on or respond to being plugged into computer. help?!

    I was using my ipod touch yesterday, no problems. Today, I come to listen to some music and it's dead. I try turning it on- unresponsive. Place it in my docking station (usual place I charge it most days)- unresponsive. Plug it into itunes on my laptop- unresponsive. Screen is just black. Won't reset. It also overheats near the connection if I connect it to my docking station or my usb. Anyone help?!

    You can try placing the iPod in recoverymode to see if that will allow iTunes to see the iPod so you can restore the iPod. For recovry mod see:
    iPhone and iPod touch: Unable to update or restore
    However, From the hot symptom, I suspect you have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My ipod nano won't turn on!

    My ipod nano won't turn on. I have tried restarting and resetting it. I have tried plugging it into two different computers and both times it just kept blinking the apple logo. It's not on hold. My warranty is expired. Do I need to get it repaired or replaced, or is there something I can do?

    my ipod nano won't trun off either sometimes.. when that happens i have to hit play and have it play a song for a couple of seconds and then do the thing to turn it off andfthen it turns off.

  • 7th gen iPod nano won't turn on after disconnect.

    7th gen iPod nano won't turn on after disconnect. I loaded some new music, synced and ejected correctly. screen went black on unplug. Waited, did the button trick, didn't work. plugged it back in & it is recognized immediately. restored, resynced & ejected again. same thing-black screen w/ no response. Charged it overnight. ejected, screen then went to language setting. OK for English, eject & back to black on unplug. Switched ports for cable, tried eject thru PC...all resulting in dead nano after unplug. I really don't want to charge into the store & take it out on the poor kid who will catch the brunt of my frustration. anyone have a suggestion?

    Hello Marie,
    I would be concerned too if my iPod nano was not powering on.  I found an article for the 6th generation iPod nano that has steps you can take for an issue like this (the only difference for the 7th generation iPod nano is the steps you will take for the reset. I included the steps to reset a 7th generation iPod nano below):
    Will not turn on or screen remains dark
    Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
    If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    If the screen remains dark and will not turn on, then your iPod may need service.
    You can find the full article here:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    All the steps apply to the 7th generation except the steps for the reset.  To reset a 7th generation iPod nano, use these steps:
    Press and hold the Sleep/Wake button and the Home button for six seconds, or until the screen goes dark. The Apple logo appears after a few seconds, and then the Home screen. You may need to repeat this step.
    I got these steps from this tutorial, which may also help with your iPod not appearing in iTunes:
    iPod nano not appearing in iTunes
    http://www.apple.com/support/ipodnano/assistant/itunes/
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • TS1372 ipod nano won't turn on, says error 1437

    my ipod nano won't turn on and I've tried restoring it.  received error message 1437 after it tried restoring itself.

    http://support.apple.com/kb/TS1539   Try this.   It seems the error stems from some file errors in Windows.
    Cheers!

  • My ipod nano won't turn on (4th gen)

    My ipod nano won't turn on (4th gen)
    i dropped it out of my car and now it straight won't turn on
    *I've tried doing that "hold the menu and middle button" trick (i don't know if i have been doing it right though)
    Please respond i'm desperate

    Have you tried connecting to iTunes to be restored?  You may need to manually place the iPod into Disk Mode first so that it is recognized by both your Windows OS and iTunes.
    Putting iPod into Disk Mode
    B-rock

  • My iPod nano won't turn on power button stuck down.is this servicable?

    My iPod nano won't turn on power button stuck down.is this serviceable?This is the 6th gen model

    Hi Whackers!
    Here is a link that will help you get support for this product:
    Contact Apple for support and service
    http://support.apple.com/kb/he57
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • My iPod touch won't turn on. I have tried plugging it in to charge, but and the screen remains black. I have tried restarting/resetting it to no avail. I would really appreciate your help. Thank you.

    My iPod touch won't turn on. I have tried plugging it in to charge, but and the screen remains black. I have tried restarting/resetting it to no avail. I would really appreciate your help. Thank you.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet?  I want to be able to share wirelessly the information on the time capsule. thanks!

    How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet?  I want to be able to share wirelessly the information on the time capsule. thanks!

    I would prefer to answer in your post. as I have tried on two occasions to help.. so far this is the first time I can see you stated  you are using Lion.
    1. Did you download and install the 5.6 utility..?
    I said to do it.. you never said yes.. I did that.
    Please do it. .. you will get no place before you do.
    2. Did you bridge the TC.. ?
    If so it will work perfectly.. please post a screen shot of the summary page from the 5.6 utility. If something is wrong I can work it out from there.
    3. Or ring apple support and get them to walk you through the setup.. there should be phone support for the first week or two.

  • IPod classic won't turn off when plugged into a home theater dock; what's up? will it hurt to leave it on all the time?

    I bought a new iPod Classic and it won't turn off when plugged into a home theater dock. Is this normal and will it hurt the iPod if i leave it on all the time?

    Hi there,
    How old is your Classic? Often, after a couple of years, rechargable batteries begin to fail, especially after such a long period of inactivity. This happens with any gadget with this type of battery.
    Try leaving it plugged in for 24 hours, and try again, to rule out that it isn't just really low on charge. If this doesn't help, it may be a good time to buy a replacement. New iPod Nanos and Touches will be released this October.
    Below, I've linked to an Apple website which explains rechargable batteries, and why yours may not be working.
    Apple - Batteries
    I hope this helps, and I hope upgrading your device will not feel like an unnecessary expense. Let me know if you have any more questions,
    Nathan

  • IPod nano won't turn on unless i restart it 15 times.

    for some reason my nano won't turn on for whatever reason. it just started doing this one day. it will be charged and it won't turn on unless i restart it like 15 times. and untill the 15th time it will like only restart half way and then finaly it will turn on. but if i leave it for half a day and not listen to it, it will do the same thing. any suggestions?
    1st gen.    

    See this: My iPod won't turn on.

  • IPod Nano won't turn on.

    Good Morning - My Nano has been inactive for approx 6 weeks (left it in the in-laws house). Anyway I got it back today and I am trying to turn it on to update playlists, charge etc but when I connect it to my PC its not recognised by the PC and also it doesn't appear to be charging. I have tried resetting it without any joy. There is absolutely nothing appearing on screen
    I did notice that the apple icon appeared when I first connected it to the PC but nothing since. I have also tried charging it off the mains but still no joy.
    Any ideas??

    Try these.
    My iPod won't turn on.
    iPod battery doesn't charge.
    My iPod won't wake up.

  • Ipod Nano won't turn on unless plugged in!!!

    Please help! My Ipod nano, purchased just 2 years ago, won't turn on unless plugged in to an external power source, and when plugged in the screen has faint lines across the display and blotches at the sides! It was working perfectly fine until my battery went flat one day and all these problems popped up. Whats the problem and what should I do?

    Hello Exasperatin0n,
    And welcome to Apple Discussions!
    It's likely that your Nano's battery is shot and will need to be replaced. So I would start there and then worry about the display issue. You can choose to Apple repair the Nano, a 3rd party repair company (just do a Google search for iPod Repair and you'll get a number of results), or you can even replace the parts yourself.
    B-rock

  • Help! Ipod nano won't turn on after disconnecting!

    Okay I've had my Ipod nano for like 3 weeks. I've used it once. It worked fine when I first got it and after my battery ran out I haven't used it for about a week. When I got it back I hooked it up to my computer and updated the stuff on it as well as let it charge. After is says to safely disconnect, I disconnect it but it automatically turns off and won't turn back on. I've tried resetting it and nothing works. I thought the battery was dead but I've left it plugged in (not only USB on my computer but also tried an outlet) and it never completely charged. I've even left it plugged in overnight (well over the 4 hours it's supposed to charge). I have no idea what to do (It also took like at least a full day to completely charge the first time I've had it)

    Tuesday, December 02, 2008 7:23:56 PM
    Okay my iPod wouldn't turn on . (Guess I will be throwing out the box to ship my ipod for warranty replacement)
    at like 11pm dec 1 2008, the ipod was dead, pressing the power button did nothing.
    I thought it was a goner... I even ordered a warranty replacement..
    ipod wouldnt turn on . left it for 24 hours. when I got home from school the next day
    it tried to sync but my playlist did not exist..it even showed the folder in windows
    After trying various USB ports and seeing an Apple Icon, and "connect to power low battery"
    I even requested a warranty replacement... and apparently you throw out the box they send to cancel. I wish I could be courteous and let them know
    So in short
    PROBLEM;
    ==IPOD Won't Power on when you press the power button==
    (FIRST OF ALL , I STRONGLY URGE YOU TO NOT TRY TO OPEN THE IPOD UP,
    you will probably scratch or damage the beautiful iPod .. when it will be perfectly fine 24 hours later...)
    Try:
    RESET, and plug in to itunes and restore..
    SOLUTION:
    http://www.everymac.com/systems/apple/consumerelectronics/ipodfaq/ipod-troubleshooting-wont-turn-on-appear-hung-sad.html
    Official Apple Documentation:
    http://support.apple.com/kb/TS1383?viewlocale=en_US
    I guess my actual story will make you believe that THIS SOLUTION actually works.
    "Let the iPod battery drain
    In rare cases, iPod might get into a state in which it needs to be drained completely before it can be reset. If iPod didn't turn on after you reset it, follow these steps:
    1. Disconnect iPod from all power sources and leave it disconnected for about 24 hours.
    2. Reconnect iPod to the Apple iPod Power Adapter or computer and reset it.
    I even tried the iPod on 2 computers and it was sort of detecting the serial # in Windows
    but mostly freezing up windows.
    4. " Let iPod's battery drain"
    Was the solution for my iPod 3rd generation.
    So now that the problem was fixed, I guess iPod is so terrible after all
    Just don't drop your iPod get it a nice case
    it took from 9pm December 2,2008 to about Dcember 2,2008 6:45pm
    roughly 20 hours.. so this morning when I left I pressed the button and it wouldn't turn on
    I thought maybe the battery was knocked loose but the battery was just so low or something
    To prevent this problem I guess whenever you ipod is low battery, charge it before it gets dangerously low
    As sad as it is to wait like 24 hours without your iPod just to pray that the problem is the battery or something and then it will power on..
    When it actually does power on you would see the apple Icon
    == When it was all said and done==
    I didn't really need to use "restore" option, i think itunes resynced what it needed.
    And thanks to this I upgraded to Itunes 8 .. which I was too lazy to do before
    ==STILL DOESNT WORK?==
    If you bought it less than a year ago... Warranty..
    https://selfsolve.apple.com/GetWarranty.do
    Enter your Serial# and country and it will be located at the back of your iPod under where it says 8GB or whatever (at least for iPod Nano 3rd generation)
    I always like posting solutions, so that someone like me can benefit from it.
    It is my understanding that if you do send in your iPod they don't care about the USB cord or headphones that came with it, so you just ship the iPod itself
    see here for some frequently asked questions.
    http://www.apple.com/support/ipod/service/faq/

  • IPod nano won't turn on or be recognized in iTunes or Vista

    We recently upgraded to Windows Vista, so I downloaded iTunes 7.2, then plugged in my ipod which was working fine, then it said it had to be updated, but first I needed to update something in windows vista. So I updated Vista and also looked in the help section for ipod and read this:
    Microsoft has released an update for Windows Vista that addresses a situation where ejecting iPod from Windows Explorer or by using the "Safely Remove Hardware" feature in Windows Vista could corrupt your iPod. Apple recommends Windows Vista customers who own an iPod install this software update. For information on how to install this Microsoft hot fix, refer to the "Update your software" section below. Tip: iPod can always be ejected safely by choosing Eject iPod from the Controls menu within iTunes.
    So, I thought that my ipod would get ruined so I did the "eject ipod" from the control menu in itunes, and after that my ipod never turned on again. What happened, did I do something wrong?
    I did the 5 R's already and it does not turn on. It is not even in my computer (device manager) and its not even being recognized in itunes. It just disappeared and it won't turn on. Please help!!!
    Thanks in advance.
    Dell   Windows Vista  

    I'm having a similar problem with my Ipod (40GB, now discontinued) here's my problem:
    My hard drive would spin up and then down and then up and then it would turn off. Also I would turn it on and flip to a song, it would be OK and then if I went to flip to another one the screen would freeze on me for a few seconds, then it would work then continue doing that until I got it to turn off. It did that for a few days and then the other day I turned it on and it wouldn't take me to my music screen and it came up with an Ipod that was dead and a link under it. It did this for a while and now I can't get it to work either, I turn it on now and it comes up with a folder and the apple support website and when I tired restarting it, the screen would come up with a check mark and say "Disk Mode" at the top and "OK to disconnect" below the check mark, and now Itunes doesn't recognize it and the hard drive spins and it goes on acting like iTunes sees it when in truth it doesn't.
    Hope someone can help!
    Erin

Maybe you are looking for

  • F150 Dunning printout error

    Hello, While trying to print the dunning report we get the following error: Dunning notice for account: 'D ' 'D50016 ' was not printed > Forms for MAHNR: 'LAXM ', RBUKM: '1000 ', KOART: 'D ' do not exist (T047E) Is this a configuration error what ste

  • Character to number convertion --- APEX Checkbox

    Hi , I have table column like category here i stored the value as 1:2:3:4 using APEX checkbox. Now i want to change as 1,2,3,4 i used replace function but its giving the char value only i want to change it as a number. Can anyone help me out this pro

  • Set fixed width to legend in graph

    Hello, i have a graph on a panel that has an enabled legend. Now o want to set the width of the legend to a fixed size. For this there is the property Legend.Size.Width. This property only works if Autosize is disabled. The question is now: It looks

  • 7.6.03 Build 015-123 Installation error in Vista 64 bit

    Hi I encountered the following error while installing on Vista 64. Please help. Thank you INSTALLER_INFO: Version = 7.6.03 Build 015-123-173-107 INSTALLER_INFO: Changelist = 173107 INSTALLER_INFO: MakeId = 282844 INSTALLER_INFO: Type = kit SYS_INFO:

  • Is there a way to remove the command R from opening my media browser?

    I use command + t quite often when I am adjusting a track to sync with my drums, and once in a while I will accidentally click the command + R, which opens up my media browser.  This little accident ALWAYS takes about 20 - 30 seconds to open, which w