My ipod nano works but the screen is black -- this happened to anyone else?
my ipod nano 6th generation got wet a month ago -- it still works, but the screen is black. this ever happen to anyone else? wondering if I can restore screen.
Did you try disk mode
Hold Power and Home until it resets
When reset let go and press it again and while resetting press volume up and volume down at the same time
Similar Messages
-
iOS 7.04
That doesn't help.
There's a clear distinction between temporary files, and files downloaded to the users' download folder.
Or at least, there should be.
I'm inclined to call this a bug, since the user (being me) didn't ask for the download.
Downloading upon opening a site from the address bar is a different action than downloading from within a site (e.g. clicking a url shortcut or a button to download from an indirection). -
When my phone is powered on and not in use all of a sudden the Samsung Galaxy 5 then Samsung and Verizon logo comes on tell me to check my battery cover, I have checked it and it is secure but it still continues to happen all day long. Has this happened to anyone else?
My phone is 5 days old and does the exact same thing.
Just check the box that says do not show again when it pops up. That should Stop the pop ups all the time.
I am very dissapointed with my phone . My S5 has been very buggy, likes to freeze up , lags , drains battery in about 4-5 hours, loses data connection in "Good Signal" areas ( drops down to 3g and 1x data or says 4g lte but Web pages fail to load , say no data connection). Camera has also crashed on me twice already. -
My iPhone will not connect to wifi. The button will not switch over. Has this happened to anyone else? Please help!
Ksdow wrote:
My iPhone will not connect to wifi. The button will not switch over. Has this happened to anyone else? Please help!
It has happened to others, which you would have known by searching the forum. This is very basic forum etiquette.
Use the search button at the top of the page, or look in the MORE LIKE THIS area to the right. You'll find your answer in no time!
Best,
GDG -
IPhone 4S working but the screen is black
My iPhone screen is completely black but the phone works perfectly. I can connect it to the MAC, i can use Reflector to see everything, music, camera.. Everything works, but to see the phone's screen i need a torchlight. The fact is, that when i switch it on, i can see the Apple logo for a second and i can see everything when the phone is switched off (example: when charging i can see perfectly the battery icon, or "Connect to iTunes" ecc...). I tried to restore the phone from backup, to reset it, pressing home and the power button, DFU mode... EVERYTHING.
My question is: will buying a new LCD screen solve my problem? If not, any idea?You need to make an appointment at the Apple Store Genius Bar to have it evaluated by the techs there. We are just users like you and cannot possibly diagnose what's wrong with your phone without looking at it.
-
I went paintballing and i forgot i had my iphone in my pocket. I realized I was getting a call and my phone screen didnt work. It didnt crack it just went black. Everythin else works just not that. What is wrong with it?
try holding and pressing the sleep button and home button together for a few seconds and see if there will be any change in the screen and apple logo should appear after 10 seconds or so if not i guess its a problem with the screen itself maybe darkened pixels or maybe a wire is cut off
-
Actually I cannot access my home wifi from my laptop or cell anymore either.
I reset the modem and router about 10 times and called my ISP who said there's no problem on their end.
I've tried everything I can think of. Any advice?Make Sure iOS is updated to the latest version
Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings
If that doesn't work, then update iTunes on computer, backup device to iTunes, then restore the device.
iTunes: Backing up and Restoring iOS software
http://support.apple.com/kb/HT1414?viewlocale=en_US -
IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!
It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes
-
I just bought a used i pod touch from work but the screen says Ipod is disabled, how do I clear that to get back and eneter in the passcode?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My 3rdG iPod Touch is frozen on the home screen and the volume and time works but the screen doesnt, what do I do?
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
TS2771 iPod touch has audio but the screen is black.
My ipod touch turns on I can hear it go on but the screen stays black. I helled the top and bottom buttons together and restored it but it still does not work.
Have you tried plugging it in and letting it charge for at least half an hour? If still no sign of life, have you tried a hard reset to see if that makes a difference as well? To do this, press and hold both the Select (Center) and Menu buttons together anywhere from 15 seconds to a minute.
Don't be afraid to try the reset procedure more than once.
B-rock -
I accidentally dropped my friend's macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!
I tried to turn it off and it didn't work... and I held on to the shift key too and it still doesn't work..
Please help me..Accidental damage is not covered under Apple warranty. And it seems there is much accidental damage. Only a Genius Bar tech looking at it can tell how much it will cost to repair.
Cost to repair will be high, I suspect (though Genius Bar will confirm/deny.
There is no gentle way to say this sir/ma'am ... someone will need to pay for your friend's MBA repairs. -
I recently had my iphone 4s screen repaired because the screen was cracked. It was all ok and then a few weeks later something strange happened. My touchscreen works, but the screen doesnt show, you can see the light in the background but no picture? has anyone got any ideas as to what the problem is, is it self-repairable or even repairable at al?
The LCD Display connector has partially come loose from the logic board connector, and simply needs to be pressed back down into place. Or the front screen assembly is now faulty, and needs to be replaced again.
-
I dropped my iphone and the screen has blue lines on it. Siri still works but the screen doesn't but the screen isn't cracked or shattered. What should I do?
Bring your phone and $199 to the Apple store for an out of warranty exchange of your phone. You clearly broke it when you dropped it.
-
my iphone has stopped working it had 80% of charging but the screen got black and now i cant switch it on, what should i do?
help me ASAP pleaseHello sameen shah,
The following article would be a great place to start for information that can help get your iPhone working again.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen
Maybe you are looking for
-
Flash photo broswer in iWeb?
Can I place a photo gallery that I made in lightroom into iWeb? It creates a folder that contains files including a swf and js. I have done this in dreamweaver easily. I just want to make a cool photo browser...some one help me!!!!
-
JAX-WS Handler doesn't work.
Hi, I try to put my handler to handler chain (on client side) this way: // MyService class is generated from WSDL file by Apache-CXF wsdl2java tool. // Of course MyService extends javax.xml.ws.Service MyService myService = mew MyService() myService.s
-
2 BPEL Processes doing Read at same directory in File Adapter.
Hi, I am using File Adapter for Read operation. Normally we would make a Logical Directory for reading files at that location. There is a design design scenario where 2 BPEL processes will need to read file from same File location. Incase such a desi
-
Data load from infoprovider : status is green, but no data is loaded.
Hi, I have created a new application copying the planning application (which was again a copy from the apshell application set). I modified the dimensions, after which I wanted to load data from a BW infoprovider using the datamanager. The first thin
-
Hi I need to start my taf service in RAC. I need the command to see the complete name of my rac services and start taf service. Thanks