My Ipod nano works only 1 minute

Hello
I have a new ipod nano, and when I listen a song, the ipod works only one minute, and after, it stops ???
If I touch the ipod , i have one minute more.
What do you think about that ?
Thanks.

Just read your msg, I purchased a Nano for my wife for Valentines day and today she complained about the same issue you are having.
I checked the blogs and found a string where people were having problems with their Nano cutting off as well and read a suggestion that requested that they make certain the headphone jack was pushed all the way into the unit. I tried this and it resolved the problem with my wife's Nano. Make sure you hear the click when you push in the headphone jack.
Hope this is helpful to you.

Similar Messages

Ipod nano works when attached to other devices only

My brand new iPod Nano works when plugged into my car and home stereo, but not on its own. Anybody know how to fix this?

Sounds like a faulty battery. Since you just purchased the iPod, return it for a replacement or refund.
B-rock

IPod nano works with USB 1.1 but not USB 2.0

Anyone using an iPod nano that works with USB 1.1 but not with USB 2.0? I am using Windows XP and when installing the iPod software from CD it recognizes the iPod and am able to transfer songs using iTunes but when installing SP1 or SP2 to enable USB 2.0 transfers, Windows XP only recognizes the iPod nano as a USB Mass Storage Device. This is the same with iPod Updater.

I have a similar problem with the following configuration:
- Dell Dimension 4100 Desktop with 2 integrated USB 1.1 ports, Windows 2000 SP 4
- PCI 6-Ports USB 2.0 Card ("Mentor" resp. www.bona.com.tw), Model USB20-PCI/6P
What works well?
- All my USB add-ons (1.1 and 2.0) on the internal 1.1 ports as well as on the USB2.0 PCI card
- iPod Nano 4GB on internal 1.1 ports (external drive in windows 2000 as well as iPod in iTunes)
- iPod Nano works as well as on the USB 2.0 card ONLY WHEN my old 4-port USB1.1 hub is connected between Nano and USB card
What doesn't works?
My iPod Nano directly connected to the USB 2.0 card. Symptoms when connecting:
- Windows is very slow, process "scvhost.exe" or "system.exe" using 99% of CPU for some minutes
- iPod is recognised as external drive, but when I click on it, it is empty and copying files to it results in "I/O error"
- iTunes doesn't recognise the iPod (of course, if even windows itself cannot read from it...)
I removed all USB drivers, reinstalled iTunes, iPod (by the way, I still don't understand what "iPod update" is good for, except for updating the iPod's firmware), deactivate the internal USB1.1 ports, no result.
Help!!!!!!!!!!!!!!!!

HT1386 I just reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. Help!

reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano

Does ipod nano work with ipod photo dock, s-video out?

Does the ipod nano work with the ipod photo dock, with an s-video out? Will apple make one for the nano specifically?

The iPod nano cannot show photos on an external device, I suspect Apple have not built this feature into the hardware. The options for showing to a TV are not in the photo menus either.
Ian

Does the Ipod nano work with microsoft XP?

Does the ipod nano work with MS windows XP? itunes will recognize my Nano 7G, therefor I cannot sync,

Have you try putting your ipod into disk mode if you need help putting it in disk mode here's a page from apple
of how to put your ipod nano into disk mode: http://support.apple.com/kb/ht1363

Will ipod Nano Work With SP2?

Hi everone! I want to buy a nano but all these negative discussions are giving me doubts. I have Windows XP SP2, all patches, and a USB 2.0 port. Will my iPod Nano work properly on this machinge if I buy one?

Can you tell me more?
No, not really. I'm a Mac user and I avoid Windows like the plague.
I would imagine that any installation problems that you read about on these forums probably do not represent the majority of Windows iPod users. People post here when they have problems... so you never hear about the millions of users who are running smoothly without any issues.
Chances are, you'll have no issues at all.

Is the iPod nano the only iPod with an FM radio receiver??

is the iPod nano the only iPod with an FM radio receiver??

You can check for yourself over on Apple's own website - http://www.apple.com/ipod/

2GB ipod nano will only allow 40 songs and not 500.

My little sisters ipod nano will only allow forty smoething songs to be downloaded on it, but isn't 2GB supposed to get around 500? There is nothing else on it except music so there isn't anything else taking up memory space. And yes I have restored it numerous times. Please help!

Make sure that the Music files are compressed formats if you want to get the m ost out of the cpacity of your iPod. When the iPod is "advertised" as "500 songs" or what have you, it is based on circumstance that the song is an AAC format (.m4a) and I think an average of 4minutes long.
AAC is as small as you can get. Make sure the tracks are in that format, if they are already, then the tracks must be quite long.

IPod nano touch only no longer works on dock

I have a iPod nano touch 6 th generation that no longer charges and/or plays on my Logitech S751i dock.
My first generation iPod nano plays on this dock without any problem.
Any solution? Suggestion?
Thanks in advance...

This is the iPod touch forum. I requested the moderators move your post to the iPod Nano forum.

Does the Ipod Nano work with Windows XP SP1???

I studied the system requirements for the ipod nano and there was written, that I need a WinXP with SP2 for it.
Because I use Sound-Software that only works with Windows XP SP1 I have to keep this system, and I now would like to know if that works. Could anyone answer this question??

Have you try putting your ipod into disk mode if you need help putting it in disk mode here's a page from apple
of how to put your ipod nano into disk mode: http://support.apple.com/kb/ht1363

Windows sees 4G iPod Nano, iTunes only wants to "Restore" it

My problem is a variation on what appears to be a constant theme around here. Windows XP will recognize my 4G iPod Nano (16GB). It even gives it a drive letter. However, iTunes will only display the Software Version and Serial Number on the DEVICES Summary tab page. In the Version section of the page I can click the Restore button, but the restore will fail approximately half way through with the following, and I discovered vague, error:
+The iPod "iPod" could not be restored. An unknown error occurred (1429).+
I've spent about 6 hours researching and troubleshooting this now, completing all the steps here http://support.apple.com/kb/TS1372 and here http://support.apple.com/kb/TS1493. I've also uninstalled/reinstalled iTunes and the USB drivers a bunch. Still no joy.
I'm open to suggestions.
The following is a dump of the iTunes Diagnostic test results:
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
Hewlett-Packard Presario V3000 (RD153AV)
iTunes 9.0.2.25
QuickTime 7.6.5
FairPlay 1.5.23
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number <redacted>
Current user is an administrator.
The current local date and time is 2010-01-22 05:35:07.
iTunes is not running in safe mode.
Video Display Information
NVIDIA GeForce Go 6150
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.

b noir wrote:
Could you confirm your Presario's *model number* for me please? (Sometimes with an HP/Compaq, the number that comes up in the iTunes diagnostics is a "product number" which is applicable to a range of different models.) The following HP document may be of assistance ... I'm looking for what it refers to as "Identifier 1":
Certainly. Using HP's numerical identifiers:
1 - V3000Z
2 - RD153AV
3 - BU IDS DF UMA V3100
The full product number from my infoice was EPP00RD153AV. When I use this,
When I use the product number (RD153AV) on the Compaq Support page it sends me to *Compaq Presario V3000Z CTO Notebook PC* (http://h10025.www1.hp.com/ewfrf/wc/product?product=3180330&lc=en&cc=us&dlc=en&la ng=en&cc=us).
Many thanks for all your help troubleshooting this.

Does the 7th gen iPod Nano work w/Bluetooth 2.1 Speakers?

Does the 7th gen iPod Nano only work with Bluetooth 4.0 compatible speakers or should it also work with Bluetooth 2.1 devices?

No one here would know for sure. Since the Lightning adapter is new it may take awhile before you see any. The adapter works with my Zeppelin so there are some out there that will work. It will not be Apple making it.

Does iPod Nano work with Camera Connector?

Is the iPod Nano able to work with the Camera Connector? How about the Belkin Camera Connector or Belkin Media Reader?

6GB nano we might see in a year, a 20 GB nano is presently only a fantasy and while eventually possible, we won't be seeing it anytime soon. To my understanding the belkin media reader uses firewire to communicate among other things so no it wont work with the Nano. And of course the Nano is windows preformatted windows compatible.

My iPod Nano 4thgen only opens when connected to a pc and/or power adapter

My iPod Nano 4thGen. was brand new and I followed each and every step in the manual. I was able to connect to a computer/iTunes but after disconnecting it from the cable, the power just turns off, I pressed any key on it but failed to put the power on. I then attached it to a power adapter/charger having suspected empty battery but after I disconnected it a few hours later, the power immediately shuts down. What could've been the problem?

I have had the same problem with my daughter's IPOD nano. Spoke with several technicians to try to fix the problem to be told it was a battery problem and to send it in it was covered under warranty. Was told that it was a problem with many of the nanos. I sent it in to have it returned with 1 week stating that it had "liquid spill or submersion damage indicated by the pink/red color of liquid submersion indicator located inside headphone jack." It has not had liquid or submersion damage and I can't prove otherwise. It works only if it is attached to computer. Will not turn on unless attached to computer. Maybe I am wrong but it it has damaged by water would it still work plugged into computer. Now I am out $200.00. This frustrates my because my ipod shuffle quit working 2 months after I got it. Thats why I bought the nano thinking it was better quality.

My Ipod nano works only 1 minute

Similar Messages

Maybe you are looking for