My ipod only seems to switch on when it is charging, but once fully charged and taken out of its charger it switches off and doesnt turn back on? can anybody suggest what i should do or whats wrong?
Hi
my ipod recently has only been working when it is on charge. Once i take it off charge it switches off automatically, could you tell me the problem or how i can resolve this?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
hav ipad 2 and it is deactivated and now i m trying to it reactivated but it is not done error comes "we are not able to activate your ipad right now"..can anybody suggest what can i do for activation my ipad 2?
Have you tried plugging your iPad to iTunes?
-
My ipod touch is not turning on, even if i plug it in to the charger. I'am wanting to rest the passcode through my computer in hopes it will turn back on. So far nothing is working what should I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
4s with latest software update will not power off, text will only vibrate, iPod only works with earphones. When I sync it with iTunes it works until power save mode starts, then back to not powering down, making text sounds, or playing iPod out loud.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
I got mac pro but it is opening few websites like youtube and yahoo mail vey slowy whereas my another hp loptop can easily open these websites same time...can anybody suggest me what is wrong with apple mac pro
Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load
-
my iphone says connect to itunes and i have but when i connect it to itunes it wont restore because it says its locked with a password and i dont know the password. what do i do
iOS: Unable to update or restore
-
my ipod only connects to the wifi when i am in the room of the router. as soon as i go out of the room into some other room it disconnects and doesn't connect again. unless i go to the room of the router. i have an ipod 4 with ios 6.1.6
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now have this problem?
Did the iPod stay connected before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Could be a loose antenna connectin
http://www.ifixit.com/Guide/iPod+Touch+4th+Generation+Wi-Fi+Antenna+Replacement/ 3640
Apple Retail Store - Genius Bar -
Can calendar entries from an iPhone be pushed up to the cloud for iPad and computer updating? My phone only seems to be receiving updates from the cloud, but not able to send them.
Under Settings->Mail, Contacts, Calendars, What do you have set for the Default Calendar? Personal?
If you don't have it set to a Cloud Calendar it will only create the entry locally. You would need to select the iCloud Calendar specifically when creating the Calendar entry to have it sync.
Otherwise set your default calendar to be the iCloud Calendar so all entries are created there by default. And as such get synced to other devices. -
my speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)
Thanks for your solution, it wasn't quite what solved the problem but i remembered that i had a bit of salt water on my phone recently and spraying the charging port with an anti-oxide spray solved my problem, do you mind if i ask, how is the charging port related with the volume or/and speakers?
-
This mini is operating OSX 10.6.8 and trying to update to Mountain Lion but upgrade stops and a black overscreen displays saying to power off and power on. The upgrade fails. What's the problem?
Hi Fred,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
hello everyone i have macbook air, hello everyone i have macbook air and my startup disc is full i checked everything and and find out that all space is of OTHER and i dont know what is it and what i have to do with that
First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the available space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal. -
Hello,i have been finding problem to even open itunes.i know what have installed now is latest version and i could not open itunes in my laptop which resulted in big frustration.can anybody step in to help me for which i will be thankful to you.when i double click itunes software,it never responds even with or without iphone 4s connection with my windows 7 laptop.
miraculous...i downloaded quicktime player from apple website and then i run it.upon double click on this quick time player and then i double clicked on itunes...there comes an enry of itunes software...now i am completely enjoying my musics.photos in smart phone.
Thanks a Lot -
my ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.
Most likely, water damage.
You can try putting your iPod in a tupperware, half filled (maybe half inch) with rice grains, close the cover for about a week.
If you have done this, as soon as it got wet, higher chances of success, now looks like the water moisture is getting to the LCD screen.
Then you can always bring it to Apple Genius bar, for a an overhaul. (may cost you half the price of a new iPod classic.) -
My iphone 4s just now shut off it wont turn back on its not that old i dont know whats going on please help
Do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
-
i bought htc 8x verizon employee edition and when i update it and during installation with my error phone get off and now phone stuck on some wheel running thing and wont get on please tell me if i could download the rom or anything also
Hi mnomi! Sorry to learn of the trouble you're running into with your new phone! Have you already switched the device via your My Verizon : http://vz.to/16lkVUY Once you have done this, and verify the sim card is inserted securely, the activation will begin. If the phone is stuck on the wheel and you cannot move forward, you may want to do an alternative reset. Please follow the below instructions:
1) Ensure the device is powered off.
2) Press and hold the Volume Down button (located on the right edge) until instructed to release in step 4.
3) Press and hold the Power button (located on the top-right edge) until the device vibrates (approximately 2 seconds) then release.
4) When the restore screen appears (exclamation mark), release the Volume Down button.
5) From the restore screen, press then release the following keys to initiate the reset process:
1. Volume Up button
2. Volume Down button
3. Power button
4. Volume Down button
*Allow several minutes for the process to complete (rotating gears appear on the display to indicate that the reset is in progress).
If you have any further questions or concerns, please let us know. Keep us posted if this resolves your concerns. Thanks!
-KristieQ_VZW
Follow us on Twitter @VZW Support
Maybe you are looking for
-
Fixing row characteristics in sap bi report using query designer
Hello , I have requirement as follows : In my sap bi report there are row characteristics in sequence as follows : 1) zone 2) project description 3) wbs hirarchy 4) wbs description and free characteristics as 1) name of vendor 2) network descriptio
-
How do get contacts on Mac to replace the ones on my phone?
I want to clean up my address book on my iphone 4s and my iPad2. What would be the best way to make this happen? Do I need to completey erase the contacts on the Ipad and Iphohe and then sync with laptop?
-
Hi BW Experts, I have two Queries i.e Q1 and Q2. In Q1 i have a condition and if i execute the first Query the result set should be used as input to second Query. For that i have created a value set under reporting agent i set all the parameters.
-
Intapper failed, internal error code 0x2101
Hi, When trying to change order in EBP4.0,we are getting the following intermidiate error message 'intapper failed, internal error code 0x2101' What is the raeson for it and how to solve it. Thank you.
-
Hi, We are facing a serious authorization problem in our SCM system. We want to provide a bifurcation at the Production Planner "APO_PL_PPS" level.This is possible for authorization object "C_APO_PPL" (PP/DS, Production Planner), however "C_APO_PROD"