My iPod only works when plugged into a wall socket!

Anyone know why my iPOD only works when plugged into a wall outlet? I tried it on the Bose docking station and also my MacBook and it won't work!
Any ideas??

Sounds like a dead battery. You can have Apple swap out the battery for a flat fee or you can send it to a third party service center to have them do the same for job a little less.
B-rock

Similar Messages

How to recover music? iPod only works when plugged into wall outlet

My iPod is probably 5 years old or so. It's been acting up for a while and I stupidly, did not back it up.
The battery was replaced this weekend so it works when plugged into the wall. It will not power on or do anything when not plugged into the wall. When plugged into the wall charger, it can turn on and says it is charging. It can be used then but as soon as it is unplugged, it's dead.
When it is plugged into the computer, it says "Charging. Please wait...". There isn't enough power from my laptop to power the iPod, so my computer doesn't even recognize it. It does not show up in iTunes.
On the brightside, I have a new iPod classic waiting to be used. However, I would VERY much like to get my 90gb+ off of my old iPod first. Is there a way to do this?
I'm at a loss. Some of the files are on there are not anywhere else. I have a few songs by a friend who lost them on their own computer.
Any help would be very appreciated!

Bump. Is there no way to solve this?

My Ipod touch will only work when plugged into a itouch radio. When I take it out, it goes blank. Why can I do?

My Ipod touch will only work when plugged into an Itouch radio. When I take it out of the charger, it goes blank. The battery shows fully charged. It appears that the battery is no longer charging. What should I do?

Try a reset: Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost. If that fails, the battery may have gone kaput.

IPod only works while plugged into computer!

Help! My 2Gb iPod nano went through the washing machine, and after a few days of drying out, it only works while plugged into the computer. As soon as I take it out, the screen goes blank. I can access all my music, podcasts and photos while it's plugged in. I have tried the 5 Rs to no avail. Anybody have any ideas?

I also sent my nano through the wash and I found that if you get an ac adapter and plug it in for a few hours you will have battery life. This made me very happy however I have noticed that I can not turn the ipod off unless the hold button is on. Battery life is also not as long but long enough for me. Hope this helps

Tethering drains battery to empty even when plugged into the wall socket

Twice yesterday when tethering for a few hours my phone shut down with a flat battery even though it was plugged into a wall socket and the charging indicator was on. Can tethering use more power than the charger can supply? After shutting down the laptop, the phone charged normally.

Yes, tethering (especially via Bluetooth) can use more power than the charger can provide. That's also true of GPS navigation when connected to a car charger. In both cases, having the iPhone plugged in certainly helps, but those activities will use more power than the 5 Watts provided by the power adapter (2.5 Watts if connected to the computer's USB port), and thus drain the battery despite being connected to a power source.

Mouse only works when plugged into a specific USB port

Hello. I'm using a HP optical mouse that connects via USB plugin.
HP PIN: 505062-001 Rev.A
Operating System: Windows 7 Home Premium SP1
It only has full functionality when plugged into a specific USB port on my desktop. I can't get it to work with any other ports or chained with a HUB plugged into the port it likes. All of my other USB devices work fine with those ports and my HUBs. The red light on the bottom lights up but the mouse pointer does not respond to movement and clicking the buttons does nothing either.
1) I'm confident, that it's not a problem with the desktop hardware
2) I'm confident, that it's not a problem with the mouse hardware
When the mouse is fully functional, it's displayed under Devices and Printers, in the Devices category as "USB OPTICAL MOUSE".
When connected with the other ports or through a HUB, it appears as TWO entries in the Devices category: "HID-compliant mouse" and - here's the suspicious part - "HID-compliant keyboard"
I suspect that something's up with the driver for the mouse. Any clues, as to which driver I need? Or, is the cause of the problem something else entirely?

Hello Tick_Noby,
Your mouse only works in certain usb ports.
Has the mouse ever worked in the ports?
You can go to device manager and uninstall the fake keyboard and the mouse and restart the computer.
It seems that the driver is not correct for the mouse.
Also reset BIOS defaults.
Turn off the computer.
As you turn it back on tap the F10 key. This will load BIOS setup utility.
Press F9 to load defaults.
Press F10 to save and exit.
When the computer boots back up, check to see if everything is working.
If it has not been to long since the problem started, you can run a system restore.
This will take the system back to when everything was working correctly without affecting your personal files.
Here is a link on how to do a restore.
Let me know how everything goes
Have a good day.

My ipod only works when plugged in.

I always keep my ipod plugged into my doc and it plays fine on there and when it comes off the battery life is great. But when its off the doc the click wheel wont work and it goes idle. I tried plugging it into the wall and the pad works fine. It will oddly enough work when it has a cord plugged into the ipod but also unplugged from the all, like it has to have something in the bottom weather it's charging or no. Why wont the buttons work when something isnt plugged into the bottom of it? It's a 4th generation nano, 8g if that helps.

You can work through the remaining five 5 R's of troubleshooting.
http://www.apple.com/support/ipod/five_rs/
It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
Otherwise, it's likely a hardware issue with the iPod's clickwheel, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
http://www.apple.com/support/ipod/service/prices/
Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity. A third party service will actually replace the damaged part for a little less. Google "iPod clickwheel repair" and you should get a number of results to work with.
B-rock

My 3rd Gen iPod only charges when plugged into computer

I'd greatly appreciate it if someone could help me out with this. My trusty 3rd Generation iPod has never had any problems until just recently. Whenever I plug in my iPod to my Powerbook, it just charges and doesn't even spin the hard drive as if it was connecting to the computer. I'd love to just reformat the stupid thing but I can't as the computer can't find it. And I just bought a brand new Apple iPod Dock-Firewire cable, and nothing new is happening. Still charging but not loading. I've even tried plugging it into my PC in hopes of having it ask me to reformat it, but no luck their either.

I still would not rule out a bad connection cable but it may be the dock connection on the iPod. I would try connecting the iPod to another computer(i.e: take it to the nearest Apple Store).

3rd Gen iPod only charges when plugged into computer

I'd greatly appreciate it if someone could help me out with this. My trusty 3rd Generation iPod has never had any problems until just recently. Whenever I plug in my iPod to my computer, it just charges and doesn't even spin the hard drive as if it was connecting to the computer. I'd love to just reformat the stupid thing but I can't as the computer can't find it. I've reinstalled iTunes several times, uninstalled the firewire card drivers and let Windows reinstall them, but it still doesn't show up. Any ideas on what to do? And yes, I read the "iPod missing in "My Computer" or in iTunes for Windows" help article, and it was of no use to me.
Dell Dimension 4700 Windows XP Pro

I still would not rule out a bad connection cable but it may be the dock connection on the iPod. I would try connecting the iPod to another computer(i.e: take it to the nearest Apple Store).

7th gen Nano only works when plugged in, turns off when unplugged... battery is fully charged.

7th gen Nano only works when plugged into computer, as soon as I unplug it shuts off (it was ejected from iTunes). Battery is fully charged. Have already done a restore in iTunes and checked for updated software.

Hello there, DizDude.
The following Knowledge Base article offers up some good recommendations for troubleshooting battery issues with the 7th generation iPod Nano:
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Particularly this section:
Battery life appears short
Learn how to conserve battery life.
Ensure that the latest software is installed on the iPod.
When charging, use the cable that came with iPod nano (7th generation) and leave the device connected until it is fully charged.
Note: If you are charging using your computer, don't connect iPod nano (7th generation) to your keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPod nano (7th generation) is connected to a computer that's not turned on or is in sleep or standby mode, the iPod nano (7th generation) battery may drain.
When you are done using the iPod nano, verify that:
The Radio application is off (tap the button)
Music is paused (tap the button in the iPod application or disconnect the earphones)
There is no active Pedometer session (tap the Stop button in the Fitness application)
Dimming the screen is another way to extend battery life on iPod nano. Go to Settings > General > Brightness and restore the brightness to the default, or drag the slider to the left to lower the default screen brightness.
Playing tracks with EQ requires your iPod processor to consume more energy than playing tracks without EQ, because the EQ information is not encoded in the song. To prolong battery life, turn EQ off if you don't use it. Go to Settings > Music > EQ and select Off from the list. Note, however, that if you've added EQ to tracks in iTunes, you'll need to set EQ to Flat to have the effect of Off, because iPod keeps your iTunes settings intact.
Try restoring iPod nano (7th generation) by connecting it to iTunes and clicking Restore.
Test the battery life.
Issue not resolved
If the issue is still not resolved, please read this information on servicing your iPod.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Only works when plugged in

My iPad 2 was left on overnight, not plugged in with the battery at 95% last I checked. This morning it was off and I was unable to turn it on. I plugged it into the charger and it seemed to start up, but the date and time had been reset to December 31st 1969 at 4pm!!! Then, I tried to reset the date and time but it would automatically keep going back to that date. When I went to unplug it, so I could sync it with iTunes, it turned off immediately! It only works when plugged into the charger and even then it turned itself off after about 2 minutes. While unplugged, I tried a hard reset (holding the home and sleep/wake button down at same time for 15 seconds, but it doesn't do anything at all. I did notice that it was pretty hot yesterday, but didn't have any problems running it at all. Any suggestions, or is this clearly a hardware problem? Thanks in advance.

When it was plugged in, it was at 95% so that's not the issue. THe battery appears charged, but the device simply doesn't want to run on it. The weird date reset makes me think it could potentially be a software issue, but I'm worried it is essentially a hardware/battery problem.

I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger.

I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.

martinfromdevon wrote:
Warning to iPhone users. Do not start the update of the iPhone software using iTunes.
Nonsense, and very misleading advice. I've updated iPhone 3G, 3Gs,and 4 through itunes many times, never had a problem once, not with one single update in nearly 5 years of iPhones. Of course, I've never jailbroken my phones either. Hack your phone and have update problems? I've got news for you, the problems are not a result of iTunes or Apple's updates.

I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginabl

I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.

Dude you have a jailbroken phone as stated in your first post, no need to do a second post.
As per the forum term of service you can't get help here. Use google.
that's the downfall of jailbreaking your phone.

HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

MY iPhone 5C suddenly stopped working. It wont connect to my Mac and repeatedly reboots from the apple Logo when plugged into the wall. Help!

MY iPhone 5C suddenly stopped working. It wont connect to my Mac and repeatedly reboots from the apple Logo when plugged into the wall.
There is no water damage or anything. I got that checked at the Apple store. I also have Apple Care + but didnt let them give me a new one yet because I have photos on this that I have no yet backed up that are very important. They are the last photos I have with my grandfather. Can anyone help me. Please!

If the phone shows the "connect to iTunes" screen, the data on the phone is most likely lost.
Connecting in recovery mode is your only chance to use the phone again, besides getting it serviced by Apple.
iOS: Unable to update or restore

My iPod only works when plugged into a wall socket!

Similar Messages

Maybe you are looking for